laradock/DOCUMENTATION/content/documentation/index.md

title	type	weight
3. Documentation	index	3

List current running Containers

docker ps

You can also use the following command if you want to see only this project containers:

docker-compose ps

## Close all running Containers ```bash docker-compose stop ```

To stop single container do:

docker-compose stop {container-name}

## Delete all existing Containers ```bash docker-compose down ```
## Enter a Container (run commands in a running Container)

1 - First list the current running containers with docker ps

2 - Enter any container using:

docker-compose exec {container-name} bash

Example: enter MySQL container

docker-compose exec mysql bash

Example: enter to MySQL prompt within MySQL container

docker-compose exec mysql mysql -udefault -psecret

3 - To exit a container, type exit.

## Edit default container configuration Open the `docker-compose.yml` and change anything you want.

Examples:

Change MySQL Database Name:

    environment:
        MYSQL_DATABASE: laradock
    ...

Change Redis default port to 1111:

    ports:
        - "1111:6379"
    ...

## Edit a Docker Image

1 - Find the Dockerfile of the image you want to edit,
example for mysql it will be mysql/Dockerfile.

2 - Edit the file the way you want.

3 - Re-build the container:

docker-compose build mysql

More info on Containers rebuilding here.

## Build/Re-build Containers

If you do any change to any Dockerfile make sure you run this command, for the changes to take effect:

docker-compose build

Optionally you can specify which container to rebuild (instead of rebuilding all the containers):

docker-compose build {container-name}

You might use the --no-cache option if you want full rebuilding (docker-compose build --no-cache {container-name}).

## Add more Software (Docker Images)

To add an image (software), just edit the docker-compose.yml and add your container details, to do so you need to be familiar with the docker compose file syntax.

## View the Log files The NGINX Log file is stored in the `logs/nginx` directory.

However to view the logs of all the other containers (MySQL, PHP-FPM,...) you can run this:

docker-compose logs {container-name}

docker-compose logs -f {container-name}

More options

Install PHP Extensions

Before installing PHP extensions, you have to decide first whether you need FPM or CLI, because each of them has it's own different container, if you need it for both, you have to edit both containers.

The PHP-FPM extensions should be installed in php-fpm/Dockerfile-XX. (replace XX with your default PHP version number).
The PHP-CLI extensions should be installed in workspace/Dockerfile.

## Change the (PHP-FPM) Version By default the latest stable PHP versin is configured to run.

The PHP-FPM is responsible of serving your application code, you don't have to change the PHP-CLI version if you are planning to run your application on different PHP-FPM version.

A) Switch from PHP 7.2 to PHP 5.6

1 - Open the .env.

2 - Search for PHP_VERSION.

3 - Set the desired version number:

PHP_VERSION=5.6

4 - Finally rebuild the image

docker-compose build php-fpm

For more details about the PHP base image, visit the official PHP docker images.

## Change the PHP-CLI Version

Note: it's not very essential to edit the PHP-CLI version. The PHP-CLI is only used for the Artisan Commands & Composer. It doesn't serve your Application code, this is the PHP-FPM job.

The PHP-CLI is installed in the Workspace container. To change the PHP-CLI version you need to simply change the PHP_VERSION in te .env file as follow:

1 - Open the .env.

2 - Search for PHP_VERSION.

3 - Set the desired version number:

PHP_VERSION=7.2

4 - Finally rebuild the image

docker-compose build workspace

## Install xDebug

1 - First install xDebug in the Workspace and the PHP-FPM Containers:
a) open the .env file
b) search for the WORKSPACE_INSTALL_XDEBUG argument under the Workspace Container
c) set it to true
d) search for the PHP_FPM_INSTALL_XDEBUG argument under the PHP-FPM Container
e) set it to true

2 - Re-build the containers docker-compose build workspace php-fpm

For information on how to configure xDebug with your IDE and work it out, check this Repository or follow up on the next section if you use linux and PhpStorm.

## Start/Stop xDebug:

By installing xDebug, you are enabling it to run on startup by default.

To control the behavior of xDebug (in the php-fpm Container), you can run the following commands from the Laradock root folder, (at the same prompt where you run docker-compose):

• Stop xDebug from running by default: .php-fpm/xdebug stop.
• Start xDebug by default: .php-fpm/xdebug start.
• See the status: .php-fpm/xdebug status.

Note: If .php-fpm/xdebug doesn't execute and gives Permission Denied error the problem can be that file xdebug doesn't have execution access. This can be fixed by running chmod command with desired access permissions.

## Install pcov

1 - First install pcov in the Workspace and the PHP-FPM Containers:
a) open the .env file
b) search for the WORKSPACE_INSTALL_PCOV argument under the Workspace Container
c) set it to true
d) search for the PHP_FPM_INSTALL_PCOV argument under the PHP-FPM Container
e) set it to true

2 - Re-build the containers docker-compose build workspace php-fpm

Note that pcov is only supported on PHP 7.1 or newer. For more information on setting up pcov optimally, check the recommended section of the README

## Install phpdbg

Install phpdbg in the Workspace and the PHP-FPM Containers:

1 - Open the `.env`.

2 - Search for WORKSPACE_INSTALL_PHPDBG.

3 - Set value to true

4 - Do the same for PHP_FPM_INSTALL_PHPDBG

WORKSPACE_INSTALL_PHPDBG=true

PHP_FPM_INSTALL_PHPDBG=true

## Install ionCube Loader

1 - First install ionCube Loader in the Workspace and the PHP-FPM Containers:
a) open the .env file
b) search for the WORKSPACE_INSTALL_IONCUBE argument under the Workspace Container
c) set it to true
d) search for the PHP_FPM_INSTALL_IONCUBE argument under the PHP-FPM Container
e) set it to true

2 - Re-build the containers docker-compose build workspace php-fpm

Always download the latest version of Loaders for ionCube .

## Install Deployer (Deployment tool for PHP)

1 - Open the .env file
2 - Search for the WORKSPACE_INSTALL_DEPLOYER argument under the Workspace Container
3 - Set it to true

4 - Re-build the containers docker-compose build workspace

Deployer Documentation Here

Install SonarQube (automatic code review tool)

SonarQube® is an automatic code review tool to detect bugs, vulnerabilities and code smells in your code. It can integrate with your existing workflow to enable continuous code inspection across your project branches and pull requests.
1 - Open the .env file
2 - Search for the SONARQUBE_HOSTNAME=sonar.example.com argument
3 - Set it to your-domain sonar.example.com
4 - docker-compose up -d sonarqube
5 - Open your browser: http://localhost:9000/

Troubleshooting:

if you encounter a database error:

docker-compose exec --user=root postgres
source docker-entrypoint-initdb.d/init_sonarqube_db.sh

If you encounter logs error:

docker-compose run --user=root --rm sonarqube chown sonarqube:sonarqube /opt/sonarqube/logs

SonarQube Documentation Here

## Prepare Laradock for Production

It's recommended for production to create a custom docker-compose.yml file, for example production-docker-compose.yml

In your new production docker-compose.yml file you should contain only the containers you are planning to run in production (usage example: docker-compose -f production-docker-compose.yml up -d nginx mysql redis ...).

Note: The Database (MySQL/MariaDB/...) ports should not be forwarded on production, because Docker will automatically publish the port on the host, which is quite insecure, unless specifically told not to. So make sure to remove these lines:

ports:
    - "3306:3306"

To learn more about how Docker publishes ports, please read this excellent post on the subject.

## Setup Laravel and Docker on Digital Ocean

Full Guide Here

Install Laravel from a Docker Container

1 - First you need to enter the Workspace Container.

2 - Install Laravel.

Example using Composer

composer create-project laravel/laravel my-cool-app "5.2.*"

We recommend using composer create-project instead of the Laravel installer, to install Laravel.

For more about the Laravel installation click here.

3 - Edit .env to Map the new application path:

By default, Laradock assumes the Laravel application is living in the parent directory of the laradock folder.

Since the new Laravel application is in the my-cool-app folder, we need to replace ../:/var/www with ../my-cool-app/:/var/www, as follow:

  APP_CODE_PATH_HOST=../my-cool-app/

4 - Go to that folder and start working..

cd my-cool-app

5 - Go back to the Laradock installation steps to see how to edit the .env file.

## Run Artisan Commands

You can run artisan commands and many other Terminal commands from the Workspace container.

1 - Make sure you have the workspace container running.

docker-compose up -d workspace // ..and all your other containers

2 - Find the Workspace container name:

docker-compose ps

3 - Enter the Workspace container:

docker-compose exec workspace bash

Note: Should add --user=laradock (example docker-compose exec --user=laradock workspace bash) to have files created as your host's user to prevent issue owner of log file will be changed to root then laravel website cannot write on log file if using rotated log and new log file not existed

4 - Run anything you want :)

php artisan

composer update

phpunit

vue serve

(browse the results at http://localhost:[WORKSPACE_VUE_CLI_SERVE_HOST_PORT])

vue ui

(browse the results at http://localhost:[WORKSPACE_VUE_CLI_UI_HOST_PORT])

## Run Laravel Queue Worker

1 - Create supervisor configuration file (for ex., named laravel-worker.conf) for Laravel Queue Worker in php-worker/supervisord.d/ by simply copy from laravel-worker.conf.example

2 - Start everything up

docker-compose up -d php-worker

## Run Laravel Scheduler

Laradock provides 2 ways to run Laravel Scheduler 1 - Using cron in workspace container. Most of the time, when you start Laradock, it'll automatically start workspace container with cron inside, along with setting to run schedule:run command every minute.

2 - Using Supervisord in php-worker to run schedule:run. This way is suggested when you don't want to start workspace in production environment.
a) Comment out cron setting in workspace container, file workspace/crontab/laradock

# * * * * * laradock /usr/bin/php /var/www/artisan schedule:run >> /dev/null 2>&1

b) Create supervisor configuration file (for ex., named `laravel-scheduler.conf`) for Laravel Scheduler in `php-worker/supervisord.d/` by simply copy from `laravel-scheduler.conf.example`
c) Start php-worker container

docker-compose up -d php-worker

## Use Mailu

1 - You need register a domain.

2 - Required RECAPTCHA for signup email HERE

2 - modify following environment variable in .env file

MAILU_RECAPTCHA_PUBLIC_KEY=<YOUR_RECAPTCHA_PUBLIC_KEY>
MAILU_RECAPTCHA_PRIVATE_KEY=<YOUR_RECAPTCHA_PRIVATE_KEY>
MAILU_DOMAIN=laradock.io
MAILU_HOSTNAMES=mail.laradock.io

2 - Open your browser and visit http://YOUR_DOMAIN.

## Use NetData

1 - Run the NetData Container (netdata) with the docker-compose up command. Example:

docker-compose up -d netdata

2 - Open your browser and visit the localhost on port 19999: http://localhost:19999

## Use Metabase

1 - Run the Metabase Container (metbase) with the docker-compose up command. Example:

docker-compose up -d metabase

2 - Open your browser and visit the localhost on port 3030: http://localhost:3030

3 - You can use environment to configure Metabase container. See docs in: Running Metabase on Docker

## Use Jenkins

1. Boot the container docker-compose up -d jenkins. To enter the container type docker-compose exec jenkins bash.

2. Go to http://localhost:8090/ (if you didn't change your default port mapping)

3. Authenticate from the web app.

• Default username is admin.
• Default password is docker-compose exec jenkins cat /var/jenkins_home/secrets/initialAdminPassword.

(To enter container as root type docker-compose exec --user root jenkins bash).

4. Install some plugins.

5. Create your first Admin user, or continue as Admin.

Note: to add user go to http://localhost:8090/securityRealm/addUser and to restart it from the web app visit http://localhost:8090/restart.

You may wanna change the default security configuration, so go to http://localhost:8090/configureSecurity/ under Authorization and choosing "Anyone can do anything" or "Project-based Matrix Authorization Strategy" or anything else.

Use Redis

1 - First make sure you run the Redis Container (redis) with the docker-compose up command.

docker-compose up -d redis

To execute redis commands, enter the redis container first docker-compose exec redis bash then enter the redis-cli.

2 - Open your Laravel's .env file and set the REDIS_HOST to redis

REDIS_HOST=redis

If you're using Laravel, and you don't find the REDIS_HOST variable in your .env file. Go to the database configuration file config/database.php and replace the default 127.0.0.1 IP with redis for Redis like this:

'redis' => [
    'cluster' => false,
    'default' => [
        'host'     => 'redis',
        'port'     => 6379,
        'database' => 0,
    ],
],

3 - To enable Redis Caching and/or for Sessions Management. Also from the .env file set CACHE_DRIVER and SESSION_DRIVER to redis instead of the default file.

CACHE_DRIVER=redis
SESSION_DRIVER=redis

4 - Finally make sure you have the predis/predis package (~1.0) installed via Composer:

composer require predis/predis:^1.0

5 - You can manually test it from Laravel with this code:

\Cache::store('redis')->put('Laradock', 'Awesome', 10);

## Use Redis Cluster

1 - First make sure you run the Redis-Cluster Container (redis-cluster) with the docker-compose up command.

docker-compose up -d redis-cluster

2 - Open your Laravel's config/database.php and set the redis cluster configuration. Below is example configuration with phpredis.

Read the Laravel official documentation for more details.

'redis' => [
    'client' => 'phpredis',
    'options' => [
        'cluster' => 'redis',
    ],
    'clusters' => [
        'default' => [
            [
                'host' => 'redis-cluster',
                'password' => null,
                'port' => 7000,
                'database' => 0,
            ],
        ],
    ],
],

Use Varnish

The goal was to proxy request to varnish server using nginx. So only nginx has been configured for Varnish proxy. Nginx is on port 80 or 443. Nginx sends request through varnish server and varnish server sends request back to nginx on port 81 (external port is defined in VARNISH_BACKEND_PORT).

The idea was taken from this post

The Varnish configuration was developed and tested for Wordpress only. Probably it works with other systems.

Steps to configure varnish proxy server:

1. You have to set domain name for VARNISH_PROXY1_BACKEND_HOST variable.
2. If you want to use varnish for different domains, you have to add new configuration section in your env file.

   VARNISH_PROXY1_CACHE_SIZE=128m
   VARNISH_PROXY1_BACKEND_HOST=replace_with_your_domain.name
   VARNISH_PROXY1_SERVER=SERVER1
   

3. Then you have to add new config section into docker-compose.yml with related variables:

   custom_proxy_name:
         container_name: custom_proxy_name
         build: ./varnish
         expose:
           - ${VARNISH_PORT}
         environment:
           - VARNISH_CONFIG=${VARNISH_CONFIG}
           - CACHE_SIZE=${VARNISH_PROXY2_CACHE_SIZE}
           - VARNISHD_PARAMS=${VARNISHD_PARAMS}
           - VARNISH_PORT=${VARNISH_PORT}
           - BACKEND_HOST=${VARNISH_PROXY2_BACKEND_HOST}
           - BACKEND_PORT=${VARNISH_BACKEND_PORT}
           - VARNISH_SERVER=${VARNISH_PROXY2_SERVER}
         ports:
           - "${VARNISH_PORT}:${VARNISH_PORT}"
         links:
           - workspace
         networks:
           - frontend
   

4. change your varnish config and add nginx configuration. Example Nginx configuration is here: nginx/sites/laravel_varnish.conf.example.
5. varnish/default.vcl is old varnish configuration, which was used in the previous version. Use default_wordpress.vcl instead.

How to run:

1. Rename default_wordpress.vcl to default.vcl
2. docker-compose up -d nginx
3. docker-compose up -d proxy

Keep in mind that varnish server must be built after Nginx cause varnish checks domain affordability.

FAQ:

1. How to purge cache?
   run from any cli:
   curl -X PURGE https://yourwebsite.com/.
2. How to reload varnish?
   docker container exec proxy varnishreload
3. Which varnish commands are allowed?
   • varnishadm
   • varnishd
   • varnishhist
   • varnishlog
   • varnishncsa
   • varnishreload
   • varnishstat
   • varnishtest
   • varnishtop
4. How to reload Nginx?
   docker exec Nginx nginx -t
docker exec Nginx nginx -s reload

Use Mongo

1 - First install mongo in the Workspace and the PHP-FPM Containers:
a) open the .env file
b) search for the WORKSPACE_INSTALL_MONGO argument under the Workspace Container
c) set it to true
d) search for the PHP_FPM_INSTALL_MONGO argument under the PHP-FPM Container
e) set it to true

2 - Re-build the containers docker-compose build workspace php-fpm

3 - Run the MongoDB Container (mongo) with the docker-compose up command.

docker-compose up -d mongo

4 - Add the MongoDB configurations to the config/database.php configuration file:

'connections' => [

    'mongodb' => [
        'driver'   => 'mongodb',
        'host'     => env('DB_HOST', 'localhost'),
        'port'     => env('DB_PORT', 27017),
        'database' => env('DB_DATABASE', 'database'),
        'username' => '',
        'password' => '',
        'options'  => [
            'database' => '',
        ]
    ],

	// ...

],

5 - Open your Laravel's .env file and update the following variables:

• set the DB_HOST to your mongo.
• set the DB_PORT to 27017.
• set the DB_DATABASE to database.

6 - Finally make sure you have the jenssegers/mongodb package installed via Composer and its Service Provider is added.

composer require jenssegers/mongodb

More details about this here.

7 - Test it:

• First let your Models extend from the Mongo Eloquent Model. Check the documentation.
• Enter the Workspace Container.
• Migrate the Database php artisan migrate.

## Use PhpMyAdmin

1 - Run the phpMyAdmin Container (phpmyadmin) with the docker-compose up command. Example:

# use with mysql
docker-compose up -d mysql phpmyadmin

# use with mariadb
docker-compose up -d mariadb phpmyadmin

Note: To use with MariaDB, open .env and set PMA_DB_ENGINE=mysql to PMA_DB_ENGINE=mariadb.

2 - Open your browser and visit the localhost on port 8080: http://localhost:8080

## Use Gitlab

1 - Run the Gitlab Container (gitlab) with the docker-compose up command. Example:

docker-compose up -d gitlab

2 - Open your browser and visit the localhost on port 8989: http://localhost:8989
Note: You may change GITLAB_DOMAIN_NAME to your own domain name like http://gitlab.example.com default is http://localhost

## Use Gitlab Runner

1 - Retrieve the registration token in your gitlab project (Settings > CI / CD > Runners > Set up a specific Runner manually)

2 - Open the .env file and set the following changes:

# so that gitlab container will pass the correct domain to gitlab-runner container
GITLAB_DOMAIN_NAME=http://gitlab

GITLAB_RUNNER_REGISTRATION_TOKEN=<value-in-step-1>

# so that gitlab-runner container will send POST request for registration to correct domain
GITLAB_CI_SERVER_URL=http://gitlab

3 - Open the docker-compose.yml file and add the following changes:

    gitlab-runner:
      environment: # these values will be used during `gitlab-runner register`
        - RUNNER_EXECUTOR=docker # change from shell (default)
        - DOCKER_IMAGE=alpine
        - DOCKER_NETWORK_MODE=laradock_backend
      networks:
        - backend # connect to network where gitlab service is connected

4 - Run the Gitlab-Runner Container (gitlab-runner) with the docker-compose up command. Example:

docker-compose up -d gitlab-runner

5 - Register the gitlab-runner to the gitlab container

docker-compose exec gitlab-runner bash
gitlab-runner register

6 - Create a .gitlab-ci.yml file for your pipeline

before_script:
  - echo Hello!

job1:
  scripts:
    - echo job1

7 - Push changes to gitlab

8 - Verify that pipeline is run successful

## Use Adminer

1 - Run the Adminer Container (adminer) with the docker-compose up command. Example:

docker-compose up -d adminer

2 - Open your browser and visit the localhost on port 8080: http://localhost:8080

Note: We've locked Adminer to version 4.3.0 as at the time of writing it contained a major bug preventing PostgreSQL users from logging in. If that bug is fixed (or if you're not using PostgreSQL) feel free to set Adminer to the latest version within the Dockerfile: FROM adminer:latest

## Use Portainer

1 - Run the Portainer Container (portainer) with the docker-compose up command. Example:

docker-compose up -d portainer

2 - Open your browser and visit the localhost on port 9010: http://localhost:9010

## Use PgAdmin

1 - Run the pgAdmin Container (pgadmin) with the docker-compose up command. Example:

docker-compose up -d postgres pgadmin

2 - Open your browser and visit the localhost on port 5050: http://localhost:5050

3 - At login page use default credentials:

Username : pgadmin4@pgadmin.org

Password : admin

## Use Beanstalkd

1 - Run the Beanstalkd Container:

docker-compose up -d beanstalkd

2 - Configure Laravel to connect to that container by editing the config/queue.php config file.

a. first set beanstalkd as default queue driver b. set the queue host to beanstalkd : QUEUE_HOST=beanstalkd

beanstalkd is now available on default port 11300.

3 - Require the dependency package pda/pheanstalk using composer.

Optionally you can use the Beanstalkd Console Container to manage your Queues from a web interface.

1 - Run the Beanstalkd Console Container:

docker-compose up -d beanstalkd-console

2 - Open your browser and visit http://localhost:2080/

Note: You can customize the port on which beanstalkd console is listening by changing BEANSTALKD_CONSOLE_HOST_PORT in .env. The default value is 2080.

3 - Add the server

• Host: beanstalkd
• Port: 11300

4 - Done.

Use Confluence

1 - Run the Confluence Container (confluence) with the docker-compose up command. Example:

docker-compose up -d confluence

2 - Open your browser and visit the localhost on port 8090: http://localhost:8090

Note: Confluence is a licensed application - an evaluation licence can be obtained from Atlassian.

You can set custom confluence version in CONFLUENCE_VERSION. Find more info in section 'Versioning'

Confluence usage with Nginx and SSL.

1. Find an instance configuration file in nginx/sites/confluence.conf.example and replace sample domain with yours.

2. Configure ssl keys to your domain.

Keep in mind that Confluence is still accessible on 8090 anyway.

## Use ElasticSearch

1 - Run the ElasticSearch Container (elasticsearch) with the docker-compose up command:

docker-compose up -d elasticsearch

2 - Open your browser and visit the localhost on port 9200: http://localhost:9200

The default username is elastic and the default password is changeme.

Install ElasticSearch Plugin

1 - Install an ElasticSearch plugin.

docker-compose exec elasticsearch /usr/share/elasticsearch/bin/plugin install {plugin-name}

2 - Restart elasticsearch container

docker-compose restart elasticsearch

## Use Selenium

1 - Run the Selenium Container (selenium) with the docker-compose up command. Example:

docker-compose up -d selenium

2 - Open your browser and visit the localhost on port 4444 at the following URL: http://localhost:4444/wd/hub

## Use RethinkDB

The RethinkDB is an open-source Database for Real-time Web (RethinkDB). A package (Laravel RethinkDB) is being developed and was released a version for Laravel 5.2 (experimental).

1 - Run the RethinkDB Container (rethinkdb) with the docker-compose up command.

docker-compose up -d rethinkdb

2 - Access the RethinkDB Administration Console http://localhost:8090/#tables for create a database called database.

3 - Add the RethinkDB configurations to the config/database.php configuration file:

'connections' => [

	'rethinkdb' => [
		'name'      => 'rethinkdb',
		'driver'    => 'rethinkdb',
		'host'      => env('DB_HOST', 'rethinkdb'),
		'port'      => env('DB_PORT', 28015),
		'database'  => env('DB_DATABASE', 'test'),
	]

	// ...

],

4 - Open your Laravel's .env file and update the following variables:

• set the DB_CONNECTION to your rethinkdb.
• set the DB_HOST to rethinkdb.
• set the DB_PORT to 28015.
• set the DB_DATABASE to database.

Additional Notes

• You may do backing up of your data using the next reference: backing up your data.

## Use Minio

1 - Configure Minio:

• On the workspace container, change INSTALL_MC to true to get the client
• Set MINIO_ACCESS_KEY and MINIO_ACCESS_SECRET if you wish to set proper keys

2 - Run the Minio Container (minio) with the docker-compose up command. Example:

docker-compose up -d minio

3 - Open your browser and visit the localhost on port 9000 at the following URL: http://localhost:9000

4 - Create a bucket either through the webui or using the mc client:

mc mb minio/bucket

5 - When configuring your other clients use the following details:

S3_HOST=http://minio
S3_KEY=access
S3_SECRET=secretkey
S3_REGION=us-east-1
S3_BUCKET=bucket

## Use Thumbor

Thumbor is a smart imaging service. It enables on-demand crop, resizing and flipping of images. (Thumbor)

1 - Configure Thumbor:

• Checkout all the options under the thumbor settings

2 - Run the Thumbor Container (minio) with the docker-compose up command. Example:

docker-compose up -d thumbor

3 - Navigate to an example image on http://localhost:8000/unsafe/300x300/i.imgur.com/bvjzPct.jpg

For more documentation on Thumbor visit the Thumbor documenation page

## Use AWS

1 - Configure AWS:

• make sure to add your SSH keys in aws/ssh_keys folder

2 - Run the Aws Container (aws) with the docker-compose up command. Example:

docker-compose up -d aws

3 - Access the aws container with docker-compose exec aws bash

4 - To start using eb cli inside the container, initialize your project first by doing 'eb init'. Read the aws eb cli docs for more details.

## Use Grafana

1 - Configure Grafana: Change Port using GRAFANA_PORT if you wish to. Default is port 3000.

2 - Run the Grafana Container (grafana) with the docker-compose upcommand:

docker-compose up -d grafana

3 - Open your browser and visit the localhost on port 3000 at the following URL: http://localhost:3000

4 - Login using the credentials User = admin, Password = admin. Change the password in the web interface if you want to.

## Use Graylog

1 - Boot the container docker-compose up -d graylog

2 - Open your Laravel's .env file and set the GRAYLOG_PASSWORD to some passsword, and GRAYLOG_SHA256_PASSWORD to the sha256 representation of your password (GRAYLOG_SHA256_PASSWORD is what matters, GRAYLOG_PASSWORD is just a reminder of your password).

Your password must be at least 16 characters long You can generate sha256 of some password with the following command echo -n somesupersecretpassword | sha256sum

GRAYLOG_PASSWORD=somesupersecretpassword
GRAYLOG_SHA256_PASSWORD=b1cb6e31e172577918c9e7806c572b5ed8477d3f57aa737bee4b5b1db3696f09

3 - Go to http://localhost:9000/ (if your port is not changed)

4 - Authenticate from the app.

Username: admin Password: somesupersecretpassword (if you haven't changed the password)

5 - Go to the system->inputs and launch new input

## Use Traefik

To use Traefik you need to do some changes in traefik/trafik.toml and docker-compose.yml.

1 - Open traefik.toml and change the e-mail property in acme section.

2 - Change your domain in acme.domains. For example: main = "example.org"

2.1 - If you have subdomains, you must add them to sans property in acme.domains section.

[[acme.domais]]
  main = "example.org"
  sans = ["monitor.example.org", "pma.example.org"]

3 - If you need to add basic authentication (https://docs.traefik.io/configuration/entrypoints/#basic-authentication), you just need to add the following text after [entryPoints.https.tls]:

[entryPoints.https.auth.basic]
  users = ["user:password"]

4 - You need to change the docker-compose.yml file to match the Traefik needs. If you want to use Traefik, you must not expose the ports of each container to the internet, but specify some labels.

4.1 For example, let's try with NGINX. You must have:

nginx:
  build:
    context: ./nginx
    args:
      - PHP_UPSTREAM_CONTAINER=${NGINX_PHP_UPSTREAM_CONTAINER}
      - PHP_UPSTREAM_PORT=${NGINX_PHP_UPSTREAM_PORT}
      - CHANGE_SOURCE=${CHANGE_SOURCE}
  volumes:
    - ${APP_CODE_PATH_HOST}:${APP_CODE_PATH_CONTAINER}
    - ${NGINX_HOST_LOG_PATH}:/var/log/nginx
    - ${NGINX_SITES_PATH}:/etc/nginx/sites-available
  depends_on:
    - php-fpm
  networks:
    - frontend
    - backend
  labels:
    - traefik.backend=nginx
    - traefik.frontend.rule=Host:example.org
    - traefik.port=80

instead of

nginx:
  build:
    context: ./nginx
    args:
      - PHP_UPSTREAM_CONTAINER=${NGINX_PHP_UPSTREAM_CONTAINER}
      - PHP_UPSTREAM_PORT=${NGINX_PHP_UPSTREAM_PORT}
      - CHANGE_SOURCE=${CHANGE_SOURCE}
  volumes:
    - ${APP_CODE_PATH_HOST}:${APP_CODE_PATH_CONTAINER}
    - ${NGINX_HOST_LOG_PATH}:/var/log/nginx
    - ${NGINX_SITES_PATH}:/etc/nginx/sites-available
    - ${NGINX_SSL_PATH}:/etc/nginx/ssl
  ports:
    - "${NGINX_HOST_HTTP_PORT}:80"
    - "${NGINX_HOST_HTTPS_PORT}:443"
  depends_on:
    - php-fpm
  networks:
    - frontend
    - backend

## Use Mosquitto (MQTT Broker)

1 - Configure Mosquitto: Change Port using MOSQUITTO_PORT if you wish to. Default is port 9001.

2 - Run the Mosquitto Container (mosquitto) with the docker-compose upcommand:

docker-compose up -d mosquitto

3 - Open your command line and use a MQTT Client (Eg. https://github.com/mqttjs/MQTT.js) to subscribe a topic and publish a message.

4 - Subscribe: mqtt sub -t 'test' -h localhost -p 9001 -C 'ws' -v

5 - Publish: mqtt pub -t 'test' -h localhost -p 9001 -C 'ws' -m 'Hello!'

## Install CodeIgniter

To install CodeIgniter 3 on Laradock all you have to do is the following simple steps:

1 - Open the docker-compose.yml file.

2 - Change CODEIGNITER=false to CODEIGNITER=true.

3 - Re-build your PHP-FPM Container docker-compose build php-fpm.

## Install Powerline

1 - Open the .env file and set WORKSPACE_INSTALL_POWERLINE and WORKSPACE_INSTALL_PYTHON to true.

2 - Run docker-compose build workspace, after the step above.

Powerline is required python

## Install Symfony

1 - Open the .env file and set WORKSPACE_INSTALL_SYMFONY to true.

2 - Run docker-compose build workspace, after the step above.

3 - The NGINX sites include a default config file for your Symfony project symfony.conf.example, so edit it and make sure the root is pointing to your project web directory.

4 - Run docker-compose restart if the container was already running, before the step above.

5 - Visit symfony.test

## Miscellaneous
## Change the timezone

To change the timezone for the workspace container, modify the TZ build argument in the Docker Compose file to one in the TZ database.

For example, if I want the timezone to be New York:

    workspace:
        build:
            context: ./workspace
            args:
                - TZ=America/New_York
    ...

We also recommend setting the timezone in Laravel.

## Add locales to PHP-FPM

To add locales to the container:

1 - Open the .env file and set PHP_FPM_INSTALL_ADDITIONAL_LOCALES to true.

2 - Add locale codes to PHP_FPM_ADDITIONAL_LOCALES.

3 - Re-build your PHP-FPM Container docker-compose build php-fpm.

4 - Check enabled locales with docker-compose exec php-fpm locale -a

Update the locale setting, default is POSIX

1 - Open the .env file and set PHP_FPM_DEFAULT_LOCALE to en_US.UTF8 or other locale you want.

2 - Re-build your PHP-FPM Container docker-compose build php-fpm.

3 - Check the default locale with docker-compose exec php-fpm locale

## Adding cron jobs

You can add your cron jobs to workspace/crontab/root after the php artisan line.

* * * * * laradock /usr/bin/php /var/www/artisan schedule:run >> /dev/null 2>&1

# Custom cron
* * * * * root echo "Every Minute" > /var/log/cron.log 2>&1

Make sure you change the timezone if you don't want to use the default (UTC).

If you are on Windows, verify that the line endings for this file are LF only, otherwise the cron jobs will silently fail.

## Access workspace via ssh

You can access the workspace container through localhost:2222 by setting the INSTALL_WORKSPACE_SSH build argument to true.

To change the default forwarded port for ssh:

    workspace:
		ports:
			- "2222:22" # Edit this line
    ...

Then login using:

ssh -o PasswordAuthentication=no    \
    -o StrictHostKeyChecking=no     \
    -o UserKnownHostsFile=/dev/null \
    -p 2222                         \
    -i workspace/insecure_id_rsa    \
    laradock@localhost

To login as root, replace laradock@localhost with root@localhost.

## Change the (MySQL) Version By default **MySQL 8.0** is running.

MySQL 8.0 is a development release. You may prefer to use the latest stable version, or an even older release. If you wish, you can change the MySQL image that is used.

Open up your .env file and set the MYSQL_VERSION variable to the version you would like to install.

MYSQL_VERSION=5.7

Available versions are: 5.5, 5.6, 5.7, 8.0, or latest. See https://store.docker.com/images/mysql for more information.

## MySQL root access

The default username and password for the root MySQL user are root and root .

1 - Enter the MySQL container: docker-compose exec mysql bash.

2 - Enter mysql: mysql -uroot -proot for non root access use mysql -udefault -psecret.

3 - See all users: SELECT User FROM mysql.user;

4 - Run any commands show databases, show tables, select * from......

## Create Multiple Databases (MySQL)

Create createdb.sql from mysql/docker-entrypoint-initdb.d/createdb.sql.example in mysql/docker-entrypoint-initdb.d/* and add your SQL syntax as follow:

CREATE DATABASE IF NOT EXISTS `your_db_1` COLLATE 'utf8_general_ci' ;
GRANT ALL ON `your_db_1`.* TO 'mysql_user'@'%' ;

## Change MySQL port

Modify the mysql/my.cnf file to set your port number, 1234 is used as an example.

[mysqld]
port=1234

If you need MySQL access from your host, do not forget to change the internal port number ("3306:3306" -> "3306:1234") in the docker-compose configuration file.

## Use custom Domain (instead of the Docker IP)

Assuming your custom domain is laravel.test

1 - Open your /etc/hosts file and map your localhost address 127.0.0.1 to the laravel.test domain, by adding the following:

127.0.0.1    laravel.test

2 - Open your browser and visit {http://laravel.test}

Optionally you can define the server name in the NGINX configuration file, like this:

server_name laravel.test;

## Enable Global Composer Build Install

Enabling Global Composer Install during the build for the container allows you to get your composer requirements installed and available in the container after the build is done.

1 - Open the .env file

2 - Search for the WORKSPACE_COMPOSER_GLOBAL_INSTALL argument under the Workspace Container and set it to true

3 - Now add your dependencies to workspace/composer.json

4 - Re-build the Workspace Container docker-compose build workspace

## Add authentication credential for Magento 2

1 - Open the .env file

2 - Search for the WORKSPACE_COMPOSER_AUTH argument under the Workspace Container and set it to true

3 - Now add your credentials to workspace/auth.json

4 - Re-build the Workspace Container docker-compose build workspace

## Install Prestissimo

Prestissimo is a plugin for composer which enables parallel install functionality.

1 - Enable Running Global Composer Install during the Build:

Click on this Enable Global Composer Build Install and do steps 1 and 2 only then continue here.

2 - Add prestissimo as requirement in Composer:

a - Now open the workspace/composer.json file

b - Add "hirak/prestissimo": "^0.3" as requirement

c - Re-build the Workspace Container docker-compose build workspace

## Install Node + NVM

To install NVM and NodeJS in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NODE argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

## Install Node + YARN

Yarn is a new package manager for JavaScript. It is so faster than npm, which you can find here.To install NodeJS and Yarn in the Workspace container:

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NODE and WORKSPACE_INSTALL_YARN argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

## Install NPM GULP toolkit

To install NPM GULP toolkit in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NPM_GULP argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

## Install NPM BOWER package manager

To install NPM BOWER package manager in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NPM_BOWER argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

## Install NPM VUE CLI

To install NPM VUE CLI in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NPM_VUE_CLI argument under the Workspace Container and set it to true

3 - Change vue serve port using WORKSPACE_VUE_CLI_SERVE_HOST_PORT if you wish to (default value is 8080)

4 - Change vue ui port using WORKSPACE_VUE_CLI_UI_HOST_PORT if you wish to (default value is 8001)

5 - Re-build the container docker-compose build workspace

## Install NPM ANGULAR CLI

To install NPM ANGULAR CLI in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_NPM_ANGULAR_CLI argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

## Install Linuxbrew

Linuxbrew is a package manager for Linux. It is the Linux version of MacOS Homebrew and can be found here. To install Linuxbrew in the Workspace container:

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_LINUXBREW argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

## Install FFMPEG

To install FFMPEG in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_FFMPEG argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

4 - If you use the php-worker container too, please follow the same steps above especially if you have conversions that have been queued.

PS Don't forget to install the binary in the php-fpm container too by applying the same steps above to its container, otherwise the you'll get an error when running the php-ffmpeg binary.

## Install wkhtmltopdf

wkhtmltopdf is a utility for outputting a PDF from HTML

To install wkhtmltopdf in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_WKHTMLTOPDF argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

PS Don't forget to install the binary in the php-fpm container too by applying the same steps above to its container, otherwise the you'll get an error when running the wkhtmltopdf binary.

## Install GNU Parallel

GNU Parallel is a command line tool to run multiple processes in parallel.

(see https://www.gnu.org/software/parallel/parallel_tutorial.html)

To install GNU Parallel in the Workspace container

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_GNU_PARALLEL argument under the Workspace Container and set it to true

3 - Re-build the container docker-compose build workspace

## Install Supervisor

Supervisor is a client/server system that allows its users to monitor and control a number of processes on UNIX-like operating systems.

(see http://supervisord.org/index.html)

To install Supervisor in the Workspace container

1 - Open the .env file

2 - Set WORKSPACE_INSTALL_SUPERVISOR and WORKSPACE_INSTALL_PYTHON to true.

3 - Create supervisor configuration file (for ex., named laravel-worker.conf) for Laravel Queue Worker in php-worker/supervisord.d/ by simply copy from laravel-worker.conf.example

4 - Re-build the container docker-compose build workspace Or docker-composer up --build -d workspace

## Common Terminal Aliases When you start your docker container, Laradock will copy the `aliases.sh` file located in the `laradock/workspace` directory and add sourcing to the container `~/.bashrc` file.

You are free to modify the aliases.sh as you see fit, adding your own aliases (or function macros) to suit your requirements.

## Install Aerospike extension

1 - First install aerospike in the Workspace and the PHP-FPM Containers:
a) open the .env file
b) search for the WORKSPACE_INSTALL_AEROSPIKE argument under the Workspace Container
c) set it to true
d) search for the PHP_FPM_INSTALL_AEROSPIKE argument under the PHP-FPM Container
e) set it to true

2 - Re-build the containers docker-compose build workspace php-fpm

## Install Laravel Envoy (Envoy Task Runner)

1 - Open the .env file
2 - Search for the WORKSPACE_INSTALL_LARAVEL_ENVOY argument under the Workspace Container
3 - Set it to true

4 - Re-build the containers docker-compose build workspace

Laravel Envoy Documentation Here

Install php calendar extension

1 - Open the .env file
2 - Search for the PHP_FPM_INSTALL_CALENDAR argument under the PHP-FPM container
3 - Set it to true
4 - Re-build the containers docker-compose build php-fpm

## Install libfaketime in the php-fpm container Libfaketime allows you to control the date and time that is returned from the operating system. It can be used by specifying a special string in the `PHP_FPM_FAKETIME` variable in the `.env` file. For example: `PHP_FPM_FAKETIME=-1d` will set the clock back 1 day. See (https://github.com/wolfcw/libfaketime) for more information.

1 - Open the .env file
2 - Search for the PHP_FPM_INSTALL_FAKETIME argument under the PHP-FPM container
3 - Set it to true
4 - Search for the PHP_FPM_FAKETIME argument under the PHP-FPM container
5 - Set it to the desired string
6 - Re-build the containers docker-compose build php-fpm

## Install YAML PHP extension in the php-fpm container YAML PHP extension allows you to easily parse and create YAML structured data. I like YAML because it's well readable for humans. See http://php.net/manual/en/ref.yaml.php and http://yaml.org/ for more info.

1 - Open the .env file
2 - Search for the PHP_FPM_INSTALL_YAML argument under the PHP-FPM container
3 - Set it to true
4 - Re-build the container docker-compose build php-fpm

## Install AST PHP extension AST exposes the abstract syntax tree generated by PHP 7+. This extension is required by tools such as `Phan`, a static analyzer for PHP.

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_AST argument under the Workspace Container

3 - Set it to true

4 - Re-build the container docker-compose build workspace

Note If you need a specific version of AST then search for the WORKSPACE_AST_VERSION argument under the Workspace Container and set it to the desired version and continue step 4.

## Install Git Bash Prompt A bash prompt that displays information about the current git repository. In particular the branch name, difference with remote branch, number of files staged, changed, etc.

1 - Open the .env file

2 - Search for the WORKSPACE_INSTALL_GIT_PROMPT argument under the Workspace Container

3 - Set it to true

4 - Re-build the container docker-compose build workspace

Note You can configure bash-git-prompt by editing the workspace/gitprompt.sh file and re-building the workspace container. For configuration information, visit the bash-git-prompt repository.

## PHPStorm Debugging Guide Remote debug Laravel web and phpunit tests.

Debugging Guide Here

## Setup Google Cloud for docker registry

gcloud auth configure-docker

Login to gcloud for use the registry and auth the permission.

gcloud auth login

## Keep track of your Laradock changes

1. Fork the Laradock repository.
2. Use that fork as a submodule.
3. Commit all your changes to your fork.
4. Pull new stuff from the main repository from time to time.

## Improve speed on MacOS

Docker on the Mac is slow, at the time of writing. Especially for larger projects, this can be a problem. The problem is older than March 2016 - as it's a such a long-running issue, we're including it in the docs here.

So since sharing code into Docker containers with osxfs have very poor performance compared to Linux. Likely there are some workarounds:

Workaround A: using dinghy

Dinghy creates its own VM using docker-machine, it will not modify your existing docker-machine VMs.

Quick Setup giude, (we recommend you check their docs)

1. brew tap codekitchen/dinghy

2. brew install dinghy

3. dinghy create --provider virtualbox (must have virtualbox installed, but they support other providers if you prefer)

4. after the above command is done it will display some env variables, copy them to the bash profile or zsh or.. (this will instruct docker to use the server running inside the VM)

5. docker-compose up ...

### Workaround B: using d4m-nfs

You can use the d4m-nfs solution in 2 ways, the first is by using the built-in Laradock integration, and the second is using the tool separately. Below is show case of both methods:

B.1: using the built in d4m-nfs integration

In simple terms, docker-sync creates a docker container with a copy of all the application files that can be accessed very quickly from the other containers. On the other hand, docker-sync runs a process on the host machine that continuously tracks and updates files changes from the host to this intermediate container.

Out of the box, it comes pre-configured for OS X, but using it on Windows is very easy to set-up by modifying the DOCKER_SYNC_STRATEGY on the .env

Usage

Laradock comes with sync.sh, an optional bash script, that automates installing, running and stopping docker-sync. Note that to run the bash script you may need to change the permissions chmod 755 sync.sh

1. Configure your Laradock environment as you would normally do and test your application to make sure that your sites are running correctly.

2. Make sure to set DOCKER_SYNC_STRATEGY on the .env. Read the syncing strategies for details.

# osx: 'native_osx' (default)
# windows: 'unison'
# linux: docker-sync not required

DOCKER_SYNC_STRATEGY=native_osx

3. set APP_CODE_CONTAINER_FLAG to APP_CODE_CONTAINER_FLAG=:nocopy in the .env file

4. Install the docker-sync gem on the host-machine:

./sync.sh install

5. Start docker-sync and the Laradock environment. Specify the services you want to run, as you would normally do with docker-compose up

./sync.sh up nginx mysql

Please note that the first time docker-sync runs, it will copy all the files to the intermediate container and that may take a very long time (15min+). 6) To stop the environment and docker-sync do:

./sync.sh down

Setting up Aliases (optional)

You may create bash profile aliases to avoid having to remember and type these commands for everyday development. Add the following lines to your ~/.bash_profile:

alias devup="cd /PATH_TO_LARADOCK/laradock; ./sync.sh up nginx mysql" #add your services
alias devbash="cd /PATH_TO_LARADOCK/laradock; ./sync.sh bash"
alias devdown="cd /PATH_TO_LARADOCK/laradock; ./sync.sh down"

Now from any location on your machine, you can simply run devup, devbash and devdown.

Additional Commands

Opening bash on the workspace container (to run artisan for example):

./sync.sh bash

Manually triggering the synchronization of the files:

./sync.sh sync

Removing and cleaning up the files and the docker-sync container. Use only if you want to rebuild or remove docker-sync completely. The files on the host will be kept untouched.

./sync.sh clean

Additional Notes

• You may run laradock with or without docker-sync at any time using with the same .env and docker-compose.yml, because the configuration is overridden automatically when docker-sync is used.
• You may inspect the sync.sh script to learn each of the commands and even add custom ones.
• If a container cannot access the files on docker-sync, you may need to set a user on the Dockerfile of that container with an id of 1000 (this is the UID that nginx and php-fpm have configured on laradock). Alternatively, you may change the permissions to 777, but this is not recommended.

Visit the docker-sync documentation for more details.

B.2: using the d4m-nfs tool

D4m-nfs automatically mount NFS volume instead of osxfs one.

1. Update the Docker [File Sharing] preferences:

Click on the Docker Icon > Preferences > (remove everything form the list except /tmp).

2. Restart Docker.

3. Clone the d4m-nfs repository to your home directory.

git clone https://github.com/IFSight/d4m-nfs ~/d4m-nfs

4. Create (or edit) the file ~/d4m-nfs/etc/d4m-nfs-mounts.txt, and write the following configuration in it:

/Users:/Users

5. Create (or edit) the file /etc/exports, make sure it exists and is empty. (There may be collisions if you come from Vagrant or if you already executed the d4m-nfs.sh script before).

6. Run the d4m-nfs.sh script (might need Sudo):

~/d4m-nfs/d4m-nfs.sh

That's it! Run your containers.. Example:

docker-compose up ...

Note: If you faced any errors, try restarting Docker, and make sure you have no spaces in the d4m-nfs-mounts.txt file, and your /etc/exports file is clear.

## Upgrade Laradock

Moving from Docker Toolbox (VirtualBox) to Docker Native (for Mac/Windows). Requires upgrading Laradock from v3.* to v4.*:

1. Stop the docker VM docker-machine stop {default}
2. Install Docker for Mac or Windows.
3. Upgrade Laradock to v4.*.* (git pull origin master)
4. Use Laradock as you used to do: docker-compose up -d nginx mysql.

Note: If you face any problem with the last step above: rebuild all your containers docker-compose build --no-cache "Warning Containers Data might be lost!"