Point ea Alias To Correct File (#1698)

* add mail service

.github/CODE_OF_CONDUCT.md

@@ -0,0 +1,46 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+In the interest of fostering an open and welcoming environment, we as contributors and maintainers pledge to making participation in our project and our community a harassment-free experience for everyone, regardless of age, body size, disability, ethnicity, gender identity and expression, level of experience, nationality, personal appearance, race, religion, or sexual identity and orientation.
+
+## Our Standards
+
+Examples of behavior that contributes to creating a positive environment include:
+
+* Using welcoming and inclusive language
+* Being respectful of differing viewpoints and experiences
+* Gracefully accepting constructive criticism
+* Focusing on what is best for the community
+* Showing empathy towards other community members
+
+Examples of unacceptable behavior by participants include:
+
+* The use of sexualized language or imagery and unwelcome sexual attention or advances
+* Trolling, insulting/derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or electronic address, without explicit permission
+* Other conduct which could reasonably be considered inappropriate in a professional setting
+
+## Our Responsibilities
+
+Project maintainers are responsible for clarifying the standards of acceptable behavior and are expected to take appropriate and fair corrective action in response to any instances of unacceptable behavior.
+
+Project maintainers have the right and responsibility to remove, edit, or reject comments, commits, code, wiki edits, issues, and other contributions that are not aligned to this Code of Conduct, or to ban temporarily or permanently any contributor for other behaviors that they deem inappropriate, threatening, offensive, or harmful.
+
+## Scope
+
+This Code of Conduct applies both within project spaces and in public spaces when an individual is representing the project or its community. Examples of representing a project or community include using an official project e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event. Representation of a project may be further defined and clarified by project maintainers.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by contacting the project team at mahmoud@zalt.me. The project team will review and investigate all complaints, and will respond in a way that it deems appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. Further details of specific enforcement policies may be posted separately.
+
+Project maintainers who do not follow or enforce the Code of Conduct in good faith may face temporary or permanent repercussions as determined by other members of the project's leadership.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4, available at [http://contributor-covenant.org/version/1/4][version]
+
+[homepage]: http://contributor-covenant.org
+[version]: http://contributor-covenant.org/version/1/4/

.github/CONTRIBUTING.md

@@ -0,0 +1,3 @@
+### First off, thanks for taking the time to contribute!
+
+For the contribution guide [click here](http://laradock.io/contributing/).

.github/ISSUE_TEMPLATE.md

@@ -5,22 +5,19 @@
 - System info disto/version: 
 
 ### Issue:
-##### What seems to be going wrong?
-
+<!--- What seems to be wrong? -->
 _____
 
 ### Expected behavior:
-##### What should be happening instead?
-
+<!--- What should happen instead? -->
 _____
 
 ### Reproduce:
-##### How might we be able to reproduce the error?
-
+<!--- How can we reproduce the error? -->
 _____
 
 ### Relevant Code:
 
 ```
-// place code here
+// place a code sample here
 ```

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,7 @@
+<!--- Thank you for contributing to Laradock -->
+
+##### I completed the 3 steps below:
+
+- [ ] I've read the [Contribution Guide](http://laradock.io/contributing).
+- [ ] I've updated the **documentation**. (refer to [this](http://laradock.io/contributing/#update-the-documentation-site) for how to do so).
+- [ ] I enjoyed my time contributing and making developer's life easier :)

.github/README-zh.md

@@ -669,19 +669,19 @@ PHP-CLI 安装在 Workspace 容器，改变 PHP-CLI 版本你需要编辑 `works
 <a name="Use-custom-Domain"></a>
 ### 使用自定义域名 (替换 Docker 的 IP)
 
-假定你的自定义域名是 `laravel.dev`
+假定你的自定义域名是 `laravel.test`
 
-1 - 打开 `/etc/hosts` 文件添加以下内容，映射你的 localhost 地址 `127.0.0.1` 为 `laravel.dev` 域名
+1 - 打开 `/etc/hosts` 文件添加以下内容，映射你的 localhost 地址 `127.0.0.1` 为 `laravel.test` 域名
 ```bash
-127.0.0.1    laravel.dev
+127.0.0.1    laravel.test
 ```
 
-2 - 打开你的浏览器访问 `{http://laravel.dev}`
+2 - 打开你的浏览器访问 `{http://laravel.test}`
 
 你可以在 nginx 配置文件自定义服务器名称,如下:
 
 ```conf
-server_name laravel.dev;
+server_name laravel.test;
 ```
 
 <a name="Enable-Global-Composer-Build-Install"></a>

.github/README.md

@@ -0,0 +1,92 @@
+<p align="center">
+    <img src="https://s19.postimg.org/jblfytw9f/laradock-logo.jpg" alt="Laradock Logo"/>
+</p>
+
+<p align="center">A Docker PHP development environment that facilitates running PHP Apps on Docker</p>
+
+<p align="center">
+   <a href="https://travis-ci.org/laradock/laradock"><img src="https://travis-ci.org/laradock/laradock.svg?branch=master" alt="Build status"></a>
+   <a href="https://github.com/laradock/laradock/stargazers"><a href="#backers" alt="sponsors on Open Collective"><img src="https://opencollective.com/laradock/backers/badge.svg" /></a> <a href="#sponsors" alt="Sponsors on Open Collective"><img src="https://opencollective.com/laradock/sponsors/badge.svg" /></a> <img src="https://img.shields.io/github/stars/laradock/laradock.svg" alt="GitHub stars"></a>
+   <a href="https://github.com/laradock/laradock/network"><img src="https://img.shields.io/github/forks/laradock/laradock.svg" alt="GitHub forks"></a>
+   <a href="https://github.com/laradock/laradock/issues"><img src="https://img.shields.io/github/issues/laradock/laradock.svg" alt="GitHub issues"></a>
+   <a href="https://raw.githubusercontent.com/laradock/laradock/master/LICENSE"><img src="https://img.shields.io/badge/license-MIT-blue.svg" alt="GitHub license"></a>
+    <a href="http://laradock.io/contributing"><img src="https://img.shields.io/badge/contributions-welcome-brightgreen.svg?style=flat" alt="contributions welcome"></a>
+</p>
+
+<h4 align="center" style="color:#7d58c2">Use Docker First And Learn About It Later</h4>
+
+<p align="center">
+    <a href="https://zalt.me"><img src="http://forthebadge.com/images/badges/built-by-developers.svg" alt="forthebadge" width="240" ></a>
+</p>
+
+
+---
+
+<p align="center">
+	<a href="http://laradock.io">
+	   <img src="https://s19.postimg.org/ecnn9vdw3/Screen_Shot_2017-08-01_at_5.08.54_AM.png" width=300px" alt="Laradock Docs"/>
+	</a>
+</p>
+
+
+## Sponsors
+
+Support this project by becoming a sponsor. 
+
+Your logo will show up on the [github repository](https://github.com/laradock/laradock/) index page and the [documentation](http://laradock.io/) main page, with a link to your website. [[Become a sponsor](https://opencollective.com/laradock#sponsor)]
+
+<a href="https://opencollective.com/laradock/sponsor/0/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/0/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/1/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/1/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/2/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/2/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/3/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/3/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/4/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/4/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/5/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/5/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/6/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/6/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/7/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/7/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/8/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/8/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/9/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/9/avatar.svg"></a>
+
+
+## Contributors
+
+#### Core contributors:
+- [Mahmoud Zalt](https://github.com/Mahmoudz) @mahmoudz | [Twitter](https://twitter.com/Mahmoud_Zalt) | [Site](http://zalt.me)
+- [Bo-Yi Wu](https://github.com/appleboy) @appleboy | [Twitter](https://twitter.com/appleboy)
+- [Philippe Trépanier](https://github.com/philtrep) @philtrep
+- [Mike Erickson](https://github.com/mikeerickson) @mikeerickson
+- [Dwi Fahni Denni](https://github.com/zeroc0d3) @zeroc0d3
+- [Thor Erik](https://github.com/thorerik) @thorerik
+- [Winfried van Loon](https://github.com/winfried-van-loon) @winfried-van-loon
+- [TJ Miller](https://github.com/sixlive) @sixlive
+- [Yu-Lung Shao (Allen)](https://github.com/bestlong) @bestlong
+- [Milan Urukalo](https://github.com/urukalo) @urukalo
+- [Vince Chu](https://github.com/vwchu) @vwchu
+- [Huadong Zuo](https://github.com/zuohuadong) @zuohuadong
+- Join us, by submitting 20 useful PR's.
+
+#### Awesome contributors:
+
+<a href="https://github.com/laradock/laradock/graphs/contributors"><img src="https://opencollective.com/laradock/contributors.svg?width=890" /></a>
+
+
+## Donations
+
+> Help keeping the project development going, by [contributing](http://laradock.io/contributing) or donating a little. 
+> Thanks in advance.
+
+Donate directly via [Paypal](https://www.paypal.me/mzalt)
+
+[![Donate](https://img.shields.io/badge/Donate-PayPal-green.svg)](https://www.paypal.me/mzalt) 
+
+or become a backer on [Open Collective](https://opencollective.com/laradock#backer)
+
+<a href="https://opencollective.com/laradock#backers" target="_blank"><img src="https://opencollective.com/laradock/backers.svg?width=890"></a>
+
+or show your support via [Beerpay](https://beerpay.io/laradock/laradock) 
+
+[![Beerpay](https://beerpay.io/laradock/laradock/badge.svg?style=flat)](https://beerpay.io/laradock/laradock)
+
+
+## License
+
+[MIT License](https://github.com/laradock/laradock/blob/master/LICENSE)

.gitignore

@@ -2,4 +2,6 @@
 /logs
 /data
 .env
-/.project
+/.project
+.docker-sync
+/jenkins/jenkins_home

.gitlab-ci.yml

@@ -0,0 +1,62 @@
+# image: docker:latest
+# services:
+#   - docker:dind
+image: jonaskello/docker-and-compose:1.12.1-1.8.0
+services:
+  - docker:1.12.1-dind
+
+before_script:
+  - docker info
+  - docker-compose version
+  - cp env-example .env
+  - sed -i -- "s/=false/=true/g" .env
+  - cat .env
+  - env | sort
+
+build:5.6:php-fpm:
+  variables:
+    PHP_VERSION: "5.6"
+  script:
+    - docker-compose build php-fpm
+
+build:7.0:php-fpm:
+  variables:
+    PHP_VERSION: "7.0"
+  script:
+    - docker-compose build php-fpm
+
+build:7.1:php-fpm:
+  variables:
+    PHP_VERSION: "7.1"
+  script:
+    - docker-compose build php-fpm
+
+build:7.2:php-fpm:
+  variables:
+    PHP_VERSION: "7.2"
+  script:
+    - docker-compose build php-fpm
+
+build:5.6:workspace:
+  variables:
+    PHP_VERSION: "5.6"
+  script:
+    - docker-compose build workspace
+
+build:7.0:workspace:
+  variables:
+    PHP_VERSION: "7.0"
+  script:
+    - docker-compose build workspace
+
+build:7.1:workspace:
+  variables:
+    PHP_VERSION: "7.1"
+  script:
+    - docker-compose build workspace
+
+build:7.2:workspace:
+  variables:
+    PHP_VERSION: "7.2"
+  script:
+    - docker-compose build workspace

.travis.yml

@@ -4,45 +4,41 @@ services:
   - docker
 
 env:
-  matrix:  
-    - PHP_VERSION=56 BUILD_SERVICE="applications blackfire minio percona nginx caddy apache2 mysql mariadb phpmyadmin postgres postgres-postgis pgadmin neo4j mongo redis"
-    - PHP_VERSION=70 BUILD_SERVICE="applications blackfire minio percona nginx caddy apache2 mysql mariadb phpmyadmin postgres postgres-postgis pgadmin neo4j mongo redis"
-    - PHP_VERSION=71 BUILD_SERVICE="applications blackfire minio percona nginx caddy apache2 mysql mariadb phpmyadmin postgres postgres-postgis pgadmin neo4j mongo redis"
-
-    - PHP_VERSION=56 BUILD_SERVICE=workspace
-    - PHP_VERSION=70 BUILD_SERVICE=workspace
-    - PHP_VERSION=71 BUILD_SERVICE=workspace
-
-    - PHP_VERSION=56 BUILD_SERVICE=php-fpm
-    - PHP_VERSION=70 BUILD_SERVICE=php-fpm
-    - PHP_VERSION=71 BUILD_SERVICE=php-fpm
-
-    - PHP_VERSION=56 BUILD_SERVICE="php-worker hhvm"
-    - PHP_VERSION=70 BUILD_SERVICE="php-worker hhvm"
-    - PHP_VERSION=71 BUILD_SERVICE="php-worker hhvm"
-
-    - PHP_VERSION=56 BUILD_SERVICE=mssql
-    - PHP_VERSION=70 BUILD_SERVICE=mssql
-    - PHP_VERSION=71 BUILD_SERVICE=mssql
-
-    - PHP_VERSION=56 BUILD_SERVICE=rethinkdb
-    - PHP_VERSION=70 BUILD_SERVICE=rethinkdb
-    - PHP_VERSION=71 BUILD_SERVICE=rethinkdb
-
-    - PHP_VERSION=56 BUILD_SERVICE=aerospike
-    - PHP_VERSION=70 BUILD_SERVICE=aerospike
-    - PHP_VERSION=71 BUILD_SERVICE=aerospike
-
-    - PHP_VERSION=56 BUILD_SERVICE="memcached beanstalkd beanstalkd-console rabbitmq adminer elasticsearch certbot mailhog selenium jenkins proxy proxy2 balancer"
-    - PHP_VERSION=70 BUILD_SERVICE="memcached beanstalkd beanstalkd-console rabbitmq adminer elasticsearch certbot mailhog selenium jenkins proxy proxy2 balancer"
-    - PHP_VERSION=71 BUILD_SERVICE="memcached beanstalkd beanstalkd-console rabbitmq adminer elasticsearch certbot mailhog selenium jenkins proxy proxy2 balancer"
-
+  matrix:
     - HUGO_VERSION=0.20.2
 
+    - PHP_VERSION=5.6 BUILD_SERVICE=workspace
+    - PHP_VERSION=7.0 BUILD_SERVICE=workspace
+    - PHP_VERSION=7.1 BUILD_SERVICE=workspace
+    - PHP_VERSION=7.2 BUILD_SERVICE=workspace
+
+    - PHP_VERSION=5.6 BUILD_SERVICE=php-fpm
+    - PHP_VERSION=7.0 BUILD_SERVICE=php-fpm
+    - PHP_VERSION=7.1 BUILD_SERVICE=php-fpm
+    - PHP_VERSION=7.2 BUILD_SERVICE=php-fpm
+
+    - PHP_VERSION=hhvm BUILD_SERVICE=hhvm
+
+    # - PHP_VERSION=5.6 BUILD_SERVICE=php-worker
+    - PHP_VERSION=7.0 BUILD_SERVICE=php-worker
+    - PHP_VERSION=7.1 BUILD_SERVICE=php-worker
+    - PHP_VERSION=7.2 BUILD_SERVICE=php-worker
+
+    - PHP_VERSION=NA BUILD_SERVICE=solr
+    - PHP_VERSION=NA BUILD_SERVICE="mssql rethinkdb aerospike"
+    - PHP_VERSION=NA BUILD_SERVICE="blackfire minio percona nginx caddy apache2 mysql mariadb postgres postgres-postgis neo4j mongo redis"
+    - PHP_VERSION=NA BUILD_SERVICE="adminer phpmyadmin pgadmin"
+    - PHP_VERSION=NA BUILD_SERVICE="memcached beanstalkd beanstalkd-console rabbitmq elasticsearch certbot mailhog maildev selenium jenkins proxy proxy2 haproxy"
+    - PHP_VERSION=NA BUILD_SERVICE="kibana grafana laravel-echo-server"
+    # - PHP_VERSION=NA BUILD_SERVICE="aws"
+
 # Installing a newer Docker version
 before_install:
+  - curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
+  - sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
   - sudo apt-get update
-  - sudo apt-get -y -o Dpkg::Options::="--force-confnew" install docker-engine
+  - sudo apt-get -y install docker-ce
+  - docker version
 
 script: ./travis-build.sh
 

DOCUMENTATION/config.toml

@@ -1,4 +1,4 @@
-baseurl = "http://laradock.io/"
+baseurl = "https://laradock.io/"
 languageCode = "en-us"
 publishDir = "../docs"
 title = "Laradock"

DOCUMENTATION/content/contributing/index.md

@@ -13,8 +13,8 @@ If you have questions about how to use Laradock, please direct your questions to
 
 ## Found an Issue
 
-If have an issue or you found a typo in the documentation, you can help us by
-opnening an [Issue](https://github.com/laradock/laradock/issues).
+If you have an issue or you found a typo in the documentation, you can help us by
+opening an [Issue](https://github.com/laradock/laradock/issues).
 
 **Steps to do before opening an Issue:**
 
@@ -24,7 +24,7 @@ opnening an [Issue](https://github.com/laradock/laradock/issues).
 
 If your issue appears to be a bug, and hasn't been reported, then open a new issue.
 
-*This Help us to maximize the effort we can spend fixing issues and adding new
+*This helps us maximize the effort we can spend fixing issues and adding new
 features, by not reporting duplicate issues.*
 
 
@@ -61,7 +61,7 @@ To update the sidebar or add a new section to it, you can edit this `DOCUMENTATI
 
 ## Support new Software (Add new Container)
 
-* Forke the repo and clone the code.
+* Fork the repo and clone the code.
 
 * Create folder as the software name (example: `mysql` - `nginx`).
 
@@ -73,7 +73,7 @@ To update the sidebar or add a new section to it, you can edit this `DOCUMENTATI
 
 * Add the environment variables to the `env-example` if you have any.
 
-* **MOST IMPORTANTLY** updated the `Documentation`, add as much information.
+* **MOST IMPORTANTLY** update the `Documentation`, add as much information.
 
 * Submit a Pull Request, to the `master` branch.
 
@@ -81,7 +81,7 @@ To update the sidebar or add a new section to it, you can edit this `DOCUMENTATI
 
 ## Edit supported Software (Edit a Container)
 
-* Forke the repo and clone the code.
+* Fork the repo and clone the code.
 
 * Open the software (container) folder (example: `mysql` - `nginx`).
 
@@ -100,7 +100,7 @@ To update the sidebar or add a new section to it, you can edit this `DOCUMENTATI
 
 * Search for the image in the [Docker Hub](https://hub.docker.com/search/) and find the source..
 
-*Most of the image in Laradock are offical images, these projects live in other repositories and maintainer by other orgnizations.*
+*Most of the image in Laradock are offical images, these projects live in other repositories and maintainer by other organizations.*
 
 **Note:** Laradock has two base images for (`Workspace` and `php-fpm`, mainly made to speed up the build time on your machine.
 

DOCUMENTATION/content/getting-started/index.md

@@ -7,7 +7,7 @@ weight: 2
 ## Requirements
 
 - [Git](https://git-scm.com/downloads)
-- [Docker](https://www.docker.com/products/docker/) `>= 1.12`
+- [Docker](https://www.docker.com/products/docker/) `>= 17.12`
 
 
 
@@ -81,10 +81,10 @@ We'll need to do step 1 of the [Usage](#Usage) section now to make this happen.
 cp env-example .env
 ```
 
-At the top, change the `APPLICATION` variable to your project path.
+At the top, change the `APP_CODE_PATH_HOST` variable to your project path.
 
 ```
-APPLICATION=../project-z/
+APP_CODE_PATH_HOST=../project-z/
 ```
 
 Make sure to replace `project-z` with your project folder name.
@@ -94,7 +94,7 @@ Make sure to replace `project-z` with your project folder name.
 
 <a name="B"></a>
 ### B) Setup for Multiple Projects:
-> (Follow these steps if you want a single Docker environment for all your project)
+> (Follow these steps if you want a single Docker environment for all your projects)
 
 1 - Clone this repository anywhere on your machine (similar to [Steps A.2. from above](#A2)):
 
@@ -112,18 +112,20 @@ Your folder structure should look like this:
 
 2 - Go to `nginx/sites` and create config files to point to different project directory when visiting different domains.
 
-Laradock by default includes `project-1.conf` and `project-2.conf` as working samples.
+Laradock by default includes `app.conf.example`, `laravel.conf.example` and `symfony.conf.example`  as working samples.
 
-3 - change the default names `project-n`:
+3 - change the default names `*.conf`:
 
 You can rename the config files, project folders and domains as you like, just make sure the `root` in the config files, is pointing to the correct project folder name.
 
 4 - Add the domains to the **hosts** files.
 
 ```
-127.0.0.1  project-1.dev
-127.0.0.1  project-2.dev
+127.0.0.1  project-1.test
+127.0.0.1  project-2.test
+...
 ```
+If you use Chrome 63 or above for development, don't use `.dev`. [Why?](https://laravel-news.com/chrome-63-now-forces-dev-domains-https). Instead use `.localhost`, `.invalid`, `.test`, or `.example`.
 
 > **Now jump to the [Usage](#Usage) section.**
 
@@ -141,7 +143,7 @@ You can rename the config files, project folders and domains as you like, just m
 If you are using **Docker Toolbox** (VM), do one of the following:
 
 - Upgrade to Docker [Native](https://www.docker.com/products/docker) for Mac/Windows (Recommended). Check out [Upgrading Laradock](/documentation/#upgrading-laradock)
-- Use Laradock v3.\*. Visit the [Laradock-ToolBox](https://github.com/laradock/laradock/tree/Laradock-ToolBox) branch. *(outdated)*
+- Use Laradock v3.\*. Visit the [Laradock-ToolBox](https://github.com/laradock/laradock/tree/LaraDock-ToolBox) branch. *(outdated)*
 
 <br>
 
@@ -159,10 +161,13 @@ We recommend using a Docker version which is newer than 1.13.
 cp env-example .env
 ```
 
-You can edit the `.env` file to chose which software's you want to be installed in your environment. You can always refer to the `docker-compose.yml` file to see how those variables are been used.
+You can edit the `.env` file to choose which software you want to be installed in your environment. You can always refer to the `docker-compose.yml` file to see how those variables have been used.
 
+Depending on the host's operating system you may need to change the value given to `COMPOSE_FILE`. When you are running Laradock on Mac OS the correct file separator to use is `:`. When running Laradock from a Windows environment multiple files must be separated with `;`.
 
-2 - Build the enviroment and run it using `docker-compose`
+By default the containers that will be created have the current directory name as suffix (e.g. `laradock_workspace_1`). This can cause mixture of data inside the container volumes if you use laradock in multiple projects. In this case, either read the guide for [multiple projects](#B) or change the variable `COMPOSE_PROJECT_NAME` to something unique like your project name.
+
+2 - Build the environment and run it using `docker-compose`
 
 In this example we'll see how to run NGINX (web server) and MySQL (database engine) to host a PHP Web Scripts:
 
@@ -170,10 +175,10 @@ In this example we'll see how to run NGINX (web server) and MySQL (database engi
 docker-compose up -d nginx mysql
 ```
 
-**Note**: The `workspace` and `php-fpm` will run automatically in most of the cases, so no need to specify them in the `up` command. If you couldn't find them running then you need specify them as follow: `docker-compose up -d nginx php-fpm mysql workspace`.
+**Note**: All the web server containers `nginx`, `apache` ..etc depends on `php-fpm`, which means if you run any of them, they will automatically launch the `php-fpm` container for you, so no need to explicitly specify it in the `up` command. If you have to do so, you may need to run them as follows: `docker-compose up -d nginx php-fpm mysql`.
 
 
-You can select your own combination of containers form [this list](http://laradock.io/introduction/#supported-software-images).
+You can select your own combination of containers from [this list](http://laradock.io/introduction/#supported-software-images).
 
 *(Please note that sometimes we forget to update the docs, so check the `docker-compose.yml` file to see an updated list of all available containers).*
 
@@ -200,7 +205,7 @@ docker-compose exec --user=laradock workspace bash
 *You can change the PUID (User id) and PGID (group id) variables from the `.env` file)*
 
 <br>
-4 - Update your project configurations to use the database host
+4 - Update your project configuration to use the database host
 
 Open your PHP project's `.env` file or whichever configuration file you are reading from, and set the database host `DB_HOST` to `mysql`:
 
@@ -211,4 +216,4 @@ DB_HOST=mysql
 *If you want to install Laravel as PHP project, see [How to Install Laravel in a Docker Container](#Install-Laravel).*
 
 <br>
-5 - Open your browser and visit your localhost address `http://localhost/`. If you followed the multiple projects setup, you can visit `http://project-1.dev/` and `http://project-2.dev/`.
+5 - Open your browser and visit your localhost address `http://localhost/`. If you followed the multiple projects setup, you can visit `http://project-1.test/` and `http://project-2.test/`.

DOCUMENTATION/content/guides/index.md

@@ -8,6 +8,7 @@ weight: 4
 
 * [Production Setup on Digital Ocean](#Digital-Ocean)
 * [PHPStorm XDebug Setup](#PHPStorm-Debugging)
+* [Running Laravel Dusk Test](#Laravel-Dusk)
 
 
 
@@ -196,7 +197,7 @@ This is needed Prior to Creating Let's Encypt
 ## Run Your Caddy Container without the -d flag and Generate SSL with Let's Encrypt
 
 ```
-$root@server:~/laravel/laradock/caddy# docker-compose up  caddy
+$root@server:~/laravel/laradock# docker-compose up  caddy
 ```
 
 You'll be prompt here to enter your email... you may enter it or not
@@ -217,8 +218,8 @@ After it finishes, press `Ctrl` + `C` to exit.
 ## Stop All Containers and ReRun Caddy and Other Containers on Background
 
 ```
-$root@server:~/laravel/laradock/caddy# docker-compose down
-$root@server:~/laravel/laradock/caddy# docker-compose up -d mysql caddy
+$root@server:~/laravel/laradock# docker-compose down
+$root@server:~/laravel/laradock# docker-compose up -d mysql caddy
 ```
 
 View your Site in the Browser Securely Using HTTPS (https://yourdomain.com)
@@ -326,6 +327,7 @@ Set the following variables:
 - `laradock/php-fpm/xdebug.ini`
 
 Set the following variables:
+
 ```
 xdebug.remote_autostart=1
 xdebug.remote_enable=1
@@ -336,34 +338,39 @@ xdebug.cli_color=1
 
 <a name="InstallCleanHouse"></a>
 ### Need to clean house first?
+
 Make sure you are starting with a clean state. For example, do you have other Laradock containers and images?
 Here are a few things I use to clean things up.
 
 - Delete all containers using `grep laradock_` on the names, see: [Remove all containers based on docker image name](https://linuxconfig.org/remove-all-containners-based-on-docker-image-name).
+
 `docker ps -a | awk '{ print $1,$2 }' | grep laradock_ | awk '{print $1}' | xargs -I {} docker rm {}`
 
 - Delete all images containing `laradock`.
+
 `docker images | awk '{print $1,$2,$3}' | grep laradock_ | awk '{print $3}' | xargs -I {} docker rmi {}`
 **Note:** This will only delete images that were built with `Laradock`, **NOT** `laradock/*` which are pulled down by `Laradock` such as `laradock/workspace`, etc.
 **Note:** Some may fail with:
 `Error response from daemon: conflict: unable to delete 3f38eaed93df (cannot be forced) - image has dependent child images`
 
 - I added this to my `.bashrc` to remove orphaned images.
-    ```
-    dclean() {
-        processes=`docker ps -q -f status=exited`
-        if [ -n "$processes" ]; thend
-          docker rm $processes
-        fi
 
-        images=`docker images -q -f dangling=true`
-        if [ -n "$images" ]; then
-          docker rmi $images
-        fi
-    }
-    ```
+```
+dclean() {
+    processes=`docker ps -q -f status=exited`
+    if [ -n "$processes" ]; then
+      docker rm $processes
+    fi
+
+    images=`docker images -q -f dangling=true`
+    if [ -n "$images" ]; then
+      docker rmi $images
+    fi
+}
+```
 
 - If you frequently switch configurations for Laradock, you may find that adding the following and added to your `.bashrc` or equivalent useful:
+
 ```
 # remove laravel* containers
 # remove laravel_* images
@@ -406,14 +413,14 @@ laradock_php-fpm_1          php-fpm                       Up       9000/tcp
 laradock_volumes_data_1     true                          Exit 0
 laradock_volumes_source_1   true                          Exit 0
 laradock_workspace_1        /sbin/my_init                 Up       0.0.0.0:2222->22/tcp
-
-
 ```
 
 <a name="enablePhpXdebug"></a>
 ## Enable xDebug on php-fpm
+
 In a host terminal sitting in the laradock folder, run: `.php-fpm/xdebug status`
 You should see something like the following:
+
 ```
 xDebug status
 laradock_php-fpm_1
@@ -422,6 +429,7 @@ Copyright (c) 1997-2016 The PHP Group
 Zend Engine v3.0.0, Copyright (c) 1998-2016 Zend Technologies
     with Xdebug v2.4.1, Copyright (c) 2002-2016, by Derick Rethans
 ```
+
 Other commands include `.php-fpm/xdebug start | stop`.
 
 If you have enabled `xdebug=true` in `docker-compose.yml/php-fpm`, `xdebug` will already be running when
@@ -430,6 +438,7 @@ If you have enabled `xdebug=true` in `docker-compose.yml/php-fpm`, `xdebug` will
 
 <a name="InstallPHPStormConfigs"></a>
 ## PHPStorm Settings
+
 - Here are some settings that are known to work:
     - `Settings/BuildDeploymentConnection`
         - ![Settings/BuildDeploymentConnection](/images/photos/PHPStorm/Settings/BuildDeploymentConnection.png)
@@ -547,4 +556,330 @@ Assuming that you are in laradock folder, type:
     - ![ConnectionSSHAuth](/images/photos/KiTTY/ConnectionSSHAuth.png)
     - ![TerminalShell](/images/photos/KiTTY/TerminalShell.png)
 
+<br>
+<br>
+<br>
+<br>
+<br>
 
+<a name="Laravel-Dusk"></a>
+# Running Laravel Dusk Tests
+
+- [Option 1: Without Selenium](#option1-dusk)
+- [Option 2: With Selenium](#option2-dusk)
+
+<a name="option1-dusk"></a>
+## Option 1: Without Selenium
+
+- [Intro](#option1-dusk-intro)
+- [Workspace Setup](#option1-workspace-setup)
+- [Application Setup](#option1-application-setup)
+- [Choose Chrome Driver Version (Optional)](#option1-choose-chrome-driver-version)
+- [Run Dusk Tests](#option1-run-dusk-tests)
+
+<a name="option1-dusk-intro"></a>
+### Intro
+
+This is a guide to run Dusk tests in your `workspace` container with headless
+google-chrome and chromedriver. It has been tested with Laravel 5.4 and 5.5.
+
+<a name="option1-workspace-setup"></a>
+### Workspace Setup
+
+Update your .env with following entries:
+
+```
+...
+# Install Laravel installer bin to setup demo app
+WORKSPACE_INSTALL_LARAVEL_INSTALLER=true
+...
+# Install all the necessary dependencies for running Dusk tests
+WORKSPACE_INSTALL_DUSK_DEPS=true
+...
+```
+
+Then run below to build your workspace.
+
+```
+docker-compose build workspace
+```
+
+<a name="option1-application-setup"></a>
+### Application Setup
+
+Run a `workspace` container and you will be inside the container at `/var/www` directory.
+
+```
+docker-compose run workspace bash
+
+/var/www#> _
+```
+
+Create new Laravel application named `dusk-test` and install Laravel Dusk package.
+
+```
+/var/www> laravel new dusk-test
+/var/www> cd dusk-test
+/var/www/dusk-test> composer require --dev laravel/dusk
+/var/www/dusk-test> php artisan dusk:install
+```
+
+Create `.env.dusk.local` by copying from `.env` file.
+
+```
+/var/www/dusk-test> cp .env .env.dusk.local
+```
+
+Update the `APP_URL` entry in `.env.dusk.local` to local Laravel server.
+
+```
+APP_URL=http://localhost:8000
+```
+
+You will need to run chromedriver with `headless` and `no-sandbox` flag. In Laravel Dusk 2.x it is
+already set `headless` so you just need to add `no-sandbox` flag. If you on previous version 1.x,
+you will need to update your `DustTestCase#driver` as shown below. 
+
+
+```
+<?php
+
+...
+
+abstract class DuskTestCase extends BaseTestCase
+{
+    ...
+
+    /**
+    * Update chrome driver with below flags
+    */
+    protected function driver()
+    {
+        $options = (new ChromeOptions)->addArguments([
+            '--disable-gpu',
+            '--headless',
+            '--no-sandbox'
+        ]);
+
+        return RemoteWebDriver::create(
+            'http://localhost:9515', DesiredCapabilities::chrome()->setCapability(
+                ChromeOptions::CAPABILITY, $options
+            )
+        );
+    }
+}
+```
+
+<a name="option1-choose-chrome-driver-version"></a>
+### Choose Chrome Driver Version (Optional)
+
+You could choose to use either:
+
+1. Chrome Driver shipped with Laravel Dusk. (Default)
+2. Chrome Driver installed in `workspace` container. (Required tweak on DuskTestCase class)
+
+For Laravel 2.x, you need to update `DuskTestCase#prepare` method if you wish to go with option #2.
+
+```
+
+<?php
+
+...
+abstract class DuskTestCase extends BaseTestCase
+{
+    ...
+    public static function prepare()
+    {
+        // Only add this line if you wish to use chrome driver installed in workspace container.
+        // You might want to read the file path from env file.
+        static::useChromedriver('/usr/local/bin/chromedriver');
+
+        static::startChromeDriver();
+    }
+```
+
+For Laravel 1.x, you need to add `DuskTestCase#buildChromeProcess` method if you wish to go with option #2.
+
+```
+<?php
+
+...
+use Symfony\Component\Process\ProcessBuilder;
+
+abstract class DuskTestCase extends BaseTestCase
+{
+    ...
+
+    /**
+    * Only add this method if you wish to use chrome driver installed in workspace container
+    */
+    protected static function buildChromeProcess()
+    {
+        return (new ProcessBuilder())
+            ->setPrefix('chromedriver')
+            ->getProcess()
+            ->setEnv(static::chromeEnvironment());
+    }
+
+    ...
+}
+```
+
+<a name="option1-run-dusk-tests"></a>
+### Run Dusk Tests
+
+Run local server in `workspace` container and run Dusk tests.
+
+```
+# alias to run Laravel server in the background (php artisan serve --quiet &)
+/var/www/dusk-test> serve
+# alias to run Dusk tests (php artisan dusk)
+/var/www/dusk-test> dusk
+
+PHPUnit 6.4.0 by Sebastian Bergmann and contributors.
+
+.                                                                   1 / 1 (100%)
+
+Time: 837 ms, Memory: 6.00MB
+```
+
+<a name="option2-dusk"></a>
+## Option 2: With Selenium
+
+- [Intro](#dusk-intro)
+- [DNS Setup](#dns-setup)
+- [Docker Compose Setup](#docker-compose)
+- [Laravel Dusk Setup](#laravel-dusk-setup)
+- [Running Laravel Dusk Tests](#running-tests)
+
+<a name="dusk-intro"></a>
+### Intro
+Setting up Laravel Dusk tests to run with Laradock appears be something that
+eludes most Laradock users. This guide is designed to show you how to wire them
+up to work together. This guide is written with macOS and Linux in mind. As such,
+it's only been tested on macOS. Feel free to create pull requests to update the guide
+for Windows-specific instructions.
+
+This guide assumes you know how to use a DNS forwarder such as `dnsmasq` or are comfortable
+with editing the `/etc/hosts` file for one-off DNS changes.
+
+<a name="dns-setup"></a>
+### DNS Setup
+According to RFC-2606, only four TLDs are reserved for local testing[^1]:
+
+- `.test`
+- `.example`
+- `.invalid`
+- `.localhost`
+
+A common TLD used for local development is `.dev`, but newer versions of Google
+Chrome (such as the one bundled with the Selenium Docker image), will fail to
+resolve that DNS as there will appear to be a name collision.
+
+The recommended extension is `.test` for your Laravel web apps because you're
+running tests. Using a DNS forwarder such as `dnsmasq` or by editing the `/etc/hosts`
+file, configure the host to point to `localhost`.
+
+For example, in your `/etc/hosts` file:
+```
+##
+# Host Database
+#
+# localhost is used to configure the loopback interface
+# when the system is booting.  Do not change this entry.
+##
+127.0.0.1       localhost
+255.255.255.255 broadcasthost
+::1             localhost
+127.0.0.1       myapp.test
+```
+
+This will ensure that when navigating to `myapp.test`, it will route the
+request to `127.0.0.1` which will be handled by Nginx in Laradock.
+
+<a name="docker-compose"></a>
+### Docker Compose setup
+In order to make the Selenium container talk to the Nginx container appropriately,
+the `docker-compose.yml` needs to be edited to accommodate this. Make the following
+changes:
+
+```yaml
+...
+selenium:
+  ...
+  depends_on:
+  - nginx
+  links:
+  - nginx:<your_domain>
+```
+
+This allows network communication between the Nginx and Selenium containers
+and it also ensures that when starting the Selenium container, the Nginx
+container starts up first unless it's already running. This allows
+the Selenium container to make requests to the Nginx container, which is
+necessary for running Dusk tests. These changes also link the `nginx` environment
+variable to the domain you wired up in your hosts file.
+
+<a name="laravel-dusk-setup"></a>
+### Laravel Dusk Setup
+
+In order to make Laravel Dusk make the proper request to the Selenium container,
+you have to edit the `DuskTestCase.php` file that's provided on the initial
+installation of Laravel Dusk. The change you have to make deals with the URL the
+Remote Web Driver attempts to use to set up the Selenium session.
+
+One recommendation for this is to add a separate config option in your `.env.dusk.local`
+so it's still possible to run your Dusk tests locally should you want to.
+
+#### .env.dusk.local
+```
+...
+USE_SELENIUM=true
+```
+
+#### DuskTestCase.php
+```php
+abstract class DuskTestCase extends BaseTestCase
+{
+...
+    protected function driver()
+    {
+        if (env('USE_SELENIUM', 'false') == 'true') {
+            return RemoteWebDriver::create(
+                'http://selenium:4444/wd/hub', DesiredCapabilities::chrome()
+            );
+        } else {
+            return RemoteWebDriver::create(
+                'http://localhost:9515', DesiredCapabilities::chrome()
+            );
+        }
+    }
+}
+```
+
+<a name="running-tests"></a>
+### Running Laravel Dusk Tests
+
+Now that you have everything set up, to run your Dusk tests, you have to SSH
+into the workspace container as you normally would:
+```docker-compose exec --user=laradock workspace bash```
+
+Once inside, you can change directory to your application and run:
+
+```php artisan dusk```
+
+One way to make this easier from your project is to create a helper script. Here's one such example:
+```bash
+#!/usr/bin/env sh
+
+LARADOCK_HOME="path/to/laradock"
+
+pushd ${LARADOCK_HOME}
+
+docker-compose exec --user=laradock workspace bash -c "cd my-project && php artisan dusk && exit"
+```
+
+This invokes the Dusk command from inside the workspace container but when the script completes
+execution, it returns your session to your project directory.
+
+[^1]: [Don't Use .dev for Development](https://iyware.com/dont-use-dev-for-development/)

DOCUMENTATION/content/introduction/index.md

@@ -35,7 +35,7 @@ cp env-example .env
 3 - Run your containers:
 
 ```shell
-docker-compose up -d nginx mysql redis beanstalkd
+docker-compose up -d nginx mysql phpmyadmin redis workspace 
 ```
 
 4 - Open your project's `.env` file and set the following:
@@ -58,7 +58,7 @@ That's it! enjoy :)
 <a name="features"></a>
 ## Features
 
-- Easy switch between PHP versions: 7.1, 7.0, 5.6...
+- Easy switch between PHP versions: 7.2, 7.1, 5.6...
 - Choose your favorite database engine: MySQL, Postgres, MariaDB...
 - Run your own combination of software: Memcached, HHVM, Beanstalkd...
 - Every software runs on a separate container: PHP-FPM, NGINX, PHP-CLI...
@@ -83,17 +83,21 @@ In adhering to the separation of concerns principle as promoted by Docker, Larad
 You can turn On/Off as many instances of as any container without worrying about the configurations, everything works like a charm.
 
 - **Database Engines:**
-MySQL - MariaDB - Percona - MongoDB - Neo4j - RethinkDB - MSSQL - PostgreSQL - Postgres Postgis.
+MySQL - MariaDB - Percona - MongoDB - Neo4j - RethinkDB - MSSQL - PostgreSQL - Postgres-PostGIS.
+- **Database Management:**
+PhpMyAdmin - Adminer - PgAdmin
 - **Cache Engines:**
 Redis - Memcached - Aerospike
 - **PHP Servers:**
 NGINX - Apache2 - Caddy
 - **PHP Compilers:**
 PHP FPM - HHVM
-- **Message Queuing:**
-Beanstalkd - Beanstalkd Console - RabbitMQ - RabbitMQ Console - PHP Worker
-- **Tools:**
-HAProxy - Jenkins - ElasticSearch - Selenium - Certbot - Mailhog - Minio - Varnish - PhpMyAdmin - Adminer - PgAdmin - MailHog - [Blackfire](https://blackfire.io)...
+- **Message Queueing:**
+Beanstalkd - RabbitMQ - PHP Worker
+- **Queueing Management:**
+Beanstalkd Console - RabbitMQ Console
+- **Random Tools:**
+Mailu - HAProxy - Certbot - Blackfire - Selenium - Jenkins - ElasticSearch - Kibana - Grafana - Gitlab - Mailhog - MailDev - Minio - Varnish - Swoole - NetData - Portainer - Laravel Echo...
 
 Laradock introduces the **Workspace** Image, as a development environment.
 It contains a rich set of helpful tools, all pre-configured to work and integrate with almost any combination of Containers and tools you may choose.
@@ -112,6 +116,26 @@ If you can't find your Software in the list, build it yourself and submit it. Co
 
 
 
+## Sponsors
+
+
+
+
+
+Support this project by becoming a sponsor. 
+
+Your logo will show up on the [github repository](https://github.com/laradock/laradock/) index page and the [documentation](http://laradock.io/) main page, with a link to your website. [[Become a sponsor](https://opencollective.com/laradock#sponsor)]
+
+<a href="https://opencollective.com/laradock/sponsor/0/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/0/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/1/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/1/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/2/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/2/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/3/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/3/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/4/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/4/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/5/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/5/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/6/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/6/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/7/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/7/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/8/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/8/avatar.svg"></a>
+<a href="https://opencollective.com/laradock/sponsor/9/website" target="_blank"><img src="https://opencollective.com/laradock/sponsor/9/avatar.svg"></a>
 
 
 
@@ -148,7 +172,7 @@ Most importantly Docker can run on Development and on Production (same environme
 
 What's better than a **Demo Video**:
 
-- Laradock v5.* (soon or never)
+- Laradock v5.* (should be next!)
 - Laradock [v4.*](https://www.youtube.com/watch?v=TQii1jDa96Y)
 - Laradock [v2.*](https://www.youtube.com/watch?v=-DamFMczwDA)
 - Laradock [v0.3](https://www.youtube.com/watch?v=jGkyO6Is_aI)
@@ -166,3 +190,25 @@ What's better than a **Demo Video**:
 You are welcome to join our chat room on Gitter.
 
 [![Gitter](https://badges.gitter.im/Laradock/laradock.svg)](https://gitter.im/Laradock/laradock?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge)
+
+
+
+
+
+<a name="Donations"></a>
+## Donations
+
+> Help keeping the project development going, by [contributing](http://laradock.io/contributing) or donating a little. 
+> Thanks in advance.
+
+Donate directly via [Paypal](https://www.paypal.me/mzalt)
+
+[![Donate](https://img.shields.io/badge/Donate-PayPal-green.svg)](https://www.paypal.me/mzalt) 
+
+or become a backer on [Open Collective](https://opencollective.com/laradock#backer)
+
+<a href="https://opencollective.com/laradock#backers" target="_blank"><img src="https://opencollective.com/laradock/backers.svg?width=890"></a>
+
+or show your support via [Beerpay](https://beerpay.io/laradock/laradock) 
+
+[![Beerpay](https://beerpay.io/laradock/laradock/badge.svg?style=flat)](https://beerpay.io/laradock/laradock)

DOCUMENTATION/content/related-projects/index.md

@@ -14,5 +14,6 @@ These Docker Compose projects have piqued our interest:
 * [MageDock](https://github.com/ojhaujjwal/magedock) by [Ujjwal Ojha](https://github.com/ojhaujjwal)
 * [RubyDev-Dock](https://github.com/scudelletti/rubydev-dock) by [Diogo Scudelletti](https://github.com/scudelletti)
 * [NoDock](https://github.com/Osedea/nodock) by [Osedea](https://github.com/Osedea)
+* [Dockery](https://github.com/taufek/dockery) by [Taufek](https://github.com/Taufek)
 
 If you want your project listed here, please open an issue.

DOCUMENTATION/themes/hugo-material-docs/layouts/_default/single.html

@@ -20,11 +20,25 @@
 <main class="main">
 	<div class="drawer">
 		{{ partial "drawer" . }}
-	</div>
+    </div>
 
 	<article class="article">
 		<div class="wrapper">
-			<h1>{{ .Title }} {{ if .IsDraft }} (Draft){{ end }}</h1>
+
+            <!-- ------------------------------------------------------------------------- -->
+            <!-- Google Ads -->
+            <script async src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
+            <!-- Laradock Horizontal -->
+            <ins class="adsbygoogle"
+                 style="display:inline-block;width:890px;height:100px"
+                 data-ad-client="ca-pub-9826129398689742"
+                 data-ad-slot="2340256024"></ins>
+            <script>
+                (adsbygoogle = window.adsbygoogle || []).push({});
+            </script>
+            <!-- ------------------------------------------------------------------------- -->
+
+            <h1>{{ .Title }} {{ if .IsDraft }} (Draft){{ end }}</h1>
 
 			{{ .Content }}
 

DOCUMENTATION/themes/hugo-material-docs/layouts/index.html

@@ -24,6 +24,20 @@
 
 	<article class="article">
 		<div class="wrapper">
+
+            <!-- ------------------------------------------------------------------------- -->
+            <!-- Google Ads -->
+            <script async src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
+            <!-- Laradock Horizontal -->
+            <ins class="adsbygoogle"
+                 style="display:inline-block;width:890px;height:100px"
+                 data-ad-client="ca-pub-9826129398689742"
+                 data-ad-slot="2340256024"></ins>
+            <script>
+                (adsbygoogle = window.adsbygoogle || []).push({});
+            </script>
+            <!-- ------------------------------------------------------------------------- -->
+
 			{{ range where .Site.Pages "Type" "index" }}
 				<h1>{{ .Title }} {{ if .IsDraft }} (Draft){{ end }}</h1>
 

DOCUMENTATION/themes/hugo-material-docs/layouts/partials/drawer.html

@@ -5,6 +5,7 @@
         <div class="logo">
           <img src="{{ $.Site.BaseURL }}{{ . }}">
         </div>
+        Laradock
       {{ end }}
       <!--<div class="name">-->
         <!--<strong>{{ .Site.Title }} {{ with .Site.Params.version }}<span class="version">{{ . }}</span>{{ end }}</strong>-->
@@ -42,18 +43,39 @@
         </ul>
         {{ end }}
 
-        {{ if isset .Site.Params "author" }}
+
+        <br>
+        <br>
+          <div>
+            <!-- ------------------------------------------------------------------------- -->
+            <!-- Google Ads -->
+            <script async src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
+            <!-- Laradock Vertical -->
+            <ins class="adsbygoogle"
+               style="display:inline-block;width:237px;height:600px"
+               data-ad-client="ca-pub-9826129398689742"
+               data-ad-slot="9891442983"></ins>
+            <script>
+              (adsbygoogle = window.adsbygoogle || []).push({});
+            </script>
+            <!-- ------------------------------------------------------------------------- -->
+          </div>
+          <br>
+          <br>
+
+
+          <!--{{ if isset .Site.Params "author" }}-->
         <!--<hr>-->
         <!--<span class="section">The author</span>-->
-        
-        <ul>
-          {{ with .Site.Social.twitter }}
-          <li>
-            <a href="https://twitter.com/{{ . }}" target="_blank" title="@{{ . }} on Twitter">
-              @{{ . }} on Twitter
-            </a>
-          </li>
-          {{ end }}
+        <!---->
+        <!--<ul>-->
+          <!--{{ with .Site.Social.twitter }}-->
+          <!--<li>-->
+            <!--<a href="https://twitter.com/{{ . }}" target="_blank" title="@{{ . }} on Twitter">-->
+              <!--@{{ . }} on Twitter-->
+            <!--</a>-->
+          <!--</li>-->
+          <!--{{ end }}-->
 
           <!--{{ with .Site.Social.github }}-->
           <!--<li>-->
@@ -63,16 +85,17 @@
           <!--</li>-->
           <!--{{ end }}-->
 
-          {{ with .Site.Social.email }}
-          <li>
-            <a href="mailto:{{ . }}" title="Email of {{ . }}">
-              Contact via email
-            </a>
-          </li>
-          {{ end }}
-        </ul>
-        {{ end }}
+          <!--{{ with .Site.Social.email }}-->
+          <!--<li>-->
+            <!--<a href="mailto:{{ . }}" title="Email of {{ . }}">-->
+              <!--Contact via email-->
+            <!--</a>-->
+          <!--</li>-->
+          <!--{{ end }}-->
+        <!--</ul>-->
+        <!--{{ end }}-->
       </div>
+
     </div>
   </div>
 </nav>

DOCUMENTATION/themes/hugo-material-docs/layouts/partials/header.html

@@ -21,7 +21,6 @@
     <div class="button button-github" role="button" aria-label="GitHub">
         <a style="padding: 0px; font-size:40px" href="https://github.com/{{ . }}" title="@{{ . }} on GitHub" target="_blank" class="toggle-button icon icon-github"></a>
     </div>
-      <p style="font-size: 18px; padding: 8px">Github</p>
     {{ end }}
     
     <!-- TODO: disabled until Hugo supports the generation of a content index natively 

DOCUMENTATION/themes/hugo-material-docs/static/stylesheets/highlight/highlight.css

@@ -108,9 +108,17 @@ font-weight:700;
     OVERRIDING THE DEFAULT STYLES - By Mahmoud Zalt (mahmoud@zalt.me) for Laradock.io
 */
 
-.project .logo img{
-    width: 140px;
-    height: 140px;
+
+.project .logo img {
+    max-width: 100%;
+    height: auto;
     background: transparent;
     border-radius: 0%;
 }
+
+.project .banner {
+  display: flex;
+  align-items: center;
+  font-size: 14px;
+  font-weight: bold;
+}

LICENSE

@@ -1,6 +1,6 @@
 The MIT License (MIT)
 
-Copyright 2016 <Mahmoud Zalt>
+Copyright 2018 <Mahmoud Zalt>
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
@@ -18,4 +18,4 @@ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.
+THE SOFTWARE.

README.md

@@ -1,33 +0,0 @@
-![](https://s19.postimg.org/jblfytw9f/laradock-logo.jpg)
-
-[![Build Status](https://travis-ci.org/laradock/laradock.svg?branch=master)](https://travis-ci.org/laradock/laradock) [![GitHub issues](https://img.shields.io/github/issues/laradock/laradock.svg)](https://github.com/laradock/laradock/issues) [![GitHub forks](https://img.shields.io/github/forks/laradock/laradock.svg)](https://github.com/laradock/laradock/network) [![GitHub stars](https://img.shields.io/github/stars/laradock/laradock.svg)](https://github.com/laradock/laradock/stargazers) [![GitHub license](https://img.shields.io/badge/license-MIT-blue.svg)](https://raw.githubusercontent.com/laradock/laradock/master/LICENSE)
-
-> Use Docker first and learn about it later.
-
-A Docker PHP development environment that facilitates running **PHP** Apps on **Docker**.
-
-[![forthebadge](http://forthebadge.com/images/badges/built-by-developers.svg)](http://zalt.me)
-
-## Documentation
-
-[**Full Documentation Here**](http://laradock.io)
-
-## Credits
-
-**Maintainers:**
-
-- [Mahmoud Zalt](https://github.com/Mahmoudz) @mahmoudz | [Twitter](https://twitter.com/Mahmoud_Zalt) | [Site](http://zalt.me)
-- [Bo-Yi Wu](https://github.com/appleboy) @appleboy | [Twitter](https://twitter.com/appleboy)
-- [Philippe Trépanier](https://github.com/philtrep) @philtrep
-- [Mike Erickson](https://github.com/mikeerickson) @mikeerickson
-- [Dwi Fahni Denni](https://github.com/zeroc0d3) @zeroc0d3
-- [Thor Erik](https://github.com/thorerik) @thorerik
-- [Winfried van Loon](https://github.com/winfried-van-loon) @winfried-van-loon
-- [TJ Miller](https://github.com/sixlive) @sixlive
-- [Yu-Lung Shao (Allen)](https://github.com/bestlong) @bestlong
-- [Milan Urukalo](https://github.com/urukalo) @urukalo
-- Join Us.
-
-## License
-
-[MIT License](https://github.com/laradock/laradock/blob/master/LICENSE) (MIT)

adminer/Dockerfile

@@ -3,7 +3,7 @@ FROM adminer:4.3.0
 # Version 4.3.1 contains PostgreSQL login errors. See docs.
 # See https://sourceforge.net/p/adminer/bugs-and-features/548/
 
-MAINTAINER Patrick Artounian <partounian@gmail.com>
+LABEL maintainer="Patrick Artounian <partounian@gmail.com>"
 
 # Add volume for sessions to allow session persistence
 VOLUME /sessions

aerospike/Dockerfile

@@ -1,7 +1,7 @@
 FROM aerospike:latest
 
-MAINTAINER Luciano Jr <luciano@lucianojr.com.br>
+LABEL maintainer="Luciano Jr <luciano@lucianojr.com.br>"
 
 RUN rm /etc/aerospike/aerospike.conf
 
-ADD aerospike.conf /etc/aerospike/aerospike.conf
+COPY aerospike.conf /etc/aerospike/aerospike.conf

apache2/Dockerfile

@@ -1,16 +1,21 @@
 FROM webdevops/apache:ubuntu-16.04
 
-MAINTAINER Eric Pfeiffer <computerfr33k@users.noreply.github.com>
+LABEL maintainer="Eric Pfeiffer <computerfr33k@users.noreply.github.com>"
 
-ARG PHP_SOCKET=php-fpm:9000
+ARG PHP_UPSTREAM_CONTAINER=php-fpm
+ARG PHP_UPSTREAM_PORT=9000
+ARG PHP_UPSTREAM_TIMEOUT=60
+ARG DOCUMENT_ROOT=/var/www/
 
-ENV WEB_PHP_SOCKET=$PHP_SOCKET
+ENV WEB_PHP_SOCKET=${PHP_UPSTREAM_CONTAINER}:${PHP_UPSTREAM_PORT}
 
-ENV WEB_DOCUMENT_ROOT=/var/www/public/
+ENV WEB_DOCUMENT_ROOT=${DOCUMENT_ROOT}
+
+ENV WEB_PHP_TIMEOUT=${PHP_UPSTREAM_TIMEOUT}
 
 EXPOSE 80 443
 
-WORKDIR /var/www/public/
+WORKDIR /var/www/
 
 COPY vhost.conf /etc/apache2/sites-enabled/vhost.conf
 

apache2/sites/default.apache.conf

@@ -1,9 +1,9 @@
 <VirtualHost *:80>
-  ServerName laradock.dev
-  DocumentRoot /var/www/public/
+  ServerName laradock.test
+  DocumentRoot /var/www/
   Options Indexes FollowSymLinks
 
-  <Directory "/var/www/public/">
+  <Directory "/var/www/">
     AllowOverride All
     <IfVersion < 2.4>
       Allow from all

apache2/sites/sample.conf.example

@@ -1,5 +1,5 @@
 <VirtualHost *:80>
-  ServerName sample.dev
+  ServerName sample.test
   DocumentRoot /var/www/sample/public/
   Options Indexes FollowSymLinks
 

aws/.gitignore

@@ -0,0 +1 @@
+./ssh_keys

aws/Dockerfile

@@ -0,0 +1,17 @@
+FROM python:slim
+
+LABEL maintainer="melchabcede@gmail.com"
+
+RUN pip install --upgrade --no-cache-dir awsebcli
+RUN apt-get -yqq update && apt-get -yqq install git-all
+
+#NOTE: make sure ssh keys are added to ssh_keys folder
+
+RUN mkdir root/tmp_ssh
+COPY /ssh_keys/. /root/.ssh/
+RUN cd /root/.ssh && chmod 600 * && chmod 644 *.pub
+
+# Set default work directory
+WORKDIR /var/www
+
+

beanstalkd-console/Dockerfile

@@ -1,6 +1,6 @@
 FROM php:latest
 
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
 
 RUN apt-get update && apt-get install -y curl
 

beanstalkd/Dockerfile

@@ -1,6 +1,6 @@
 FROM phusion/baseimage:latest
 
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
 
 ENV DEBIAN_FRONTEND noninteractive
 ENV PATH /usr/local/rvm/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
@@ -13,4 +13,4 @@ VOLUME /var/lib/beanstalkd/data
 
 EXPOSE 11300
 
-CMD ["/usr/bin/beanstalkd"]
+CMD ["/usr/bin/beanstalkd"]

caddy/Caddyfile

@@ -1,28 +0,0 @@
-# Docs: https://caddyserver.com/docs/caddyfile
-0.0.0.0:80
-root /var/www/public
-fastcgi / php-fpm:9000 php {
-    index index.php
-}
-
-# To handle .html extensions with laravel change ext to
-# ext / .html
-
-rewrite {
-    r .*
-    ext /
-    to /index.php?{query}
-}
-gzip
-browse
-log /var/log/caddy/access.log
-errors /var/log/caddy/error.log
-# Uncomment to enable TLS (HTTPS)
-# Change the first list to listen on port 443 when enabling TLS
-#tls self_signed
-
-# To use Lets encrpt tls with a DNS provider uncomment these
-# lines and change the provider as required
-#tls {
-#  dns cloudflare
-#}

caddy/Dockerfile

@@ -1,24 +1,27 @@
-FROM alpine:3.4
+FROM golang:alpine
 
-MAINTAINER Eric Pfeiffer <computerfr33k@users.noreply.github.com>
+LABEL maintainer="Huadong Zuo <admin@zuohuadong.cn>"
 
-ENV caddy_version=0.10.3
+RUN apk add --no-cache \
+    openssh \
+    git \
+    build-base && \
+    go get github.com/abiosoft/caddyplug/caddyplug \
+    && caddyplug install-caddy \
+    apk del build-base
 
-LABEL caddy_version="$caddy_version" architecture="amd64"
+ARG plugins="cors"
 
-RUN apk update \
-    && apk upgrade \
-    && apk add tar curl git openssh
+## ARG plugins="cors cgi cloudflare azure linode"
 
-RUN curl --silent --show-error --fail --location \
-        --header "Accept: application/tar+gzip, application/x-gzip, application/octet-stream" -o - \
-        "https://caddyserver.com/download/linux/amd64?plugins=http.cgi,http.cors,http.expires,http.filemanager,http.git,http.ipfilter,http.realip,tls.dns.cloudflare,tls.dns.digitalocean,tls.dns.dnspod,tls.dns.dyn,tls.dns.googlecloud,tls.dns.linode,tls.dns.namecheap,tls.dns.ovh,tls.dns.route53,tls.dns.vultr" \
-        | tar --no-same-owner -C /usr/bin/ -xz caddy \
-    && mv /usr/bin/caddy /usr/bin/caddy \
-    && chmod 0755 /usr/bin/caddy
+RUN caddyplug install ${plugins}
 
-EXPOSE 80 443 2015
+RUN apk add --no-cache inotify-tools \
+    && echo -e "#!/bin/sh\nwhile inotifywait -e modify /etc/caddy; do\n\tpkill caddy\ndone " >> /start.sh \
+    && chmod +x /start.sh
+
+EXPOSE 80 443
 
 WORKDIR /var/www/public
 
-CMD ["/usr/bin/caddy", "-conf", "/etc/Caddyfile"]
+CMD ["sh","-c","/start.sh & /usr/bin/caddy -conf /etc/caddy/Caddyfile -agree"]

caddy/caddy/Caddyfile

@@ -0,0 +1,51 @@
+# Docs: https://caddyserver.com/docs/caddyfile
+0.0.0.0:80 {
+    root /var/www/public
+    fastcgi / php-fpm:9000 php {
+        index index.php
+    }
+
+    # To handle .html extensions with laravel change ext to
+    # ext / .html
+
+    rewrite {
+        to {path} {path}/ /index.php?{query}
+    }
+    gzip
+    browse
+    log /var/log/caddy/access.log
+    errors /var/log/caddy/error.log
+    # Uncomment to enable TLS (HTTPS)
+    # Change the first list to listen on port 443 when enabling TLS
+    #tls self_signed
+
+    # To use Lets encrpt tls with a DNS provider uncomment these
+    # lines and change the provider as required
+    #tls {
+    #  dns cloudflare
+    #}
+}
+
+laradock1.demo:80 {
+    root /var/www/public
+    # Create a Webhook in git.
+    #git {
+	#repo https://github.com/xxx/xxx
+    #    path /home/xxx
+    #    #interval 60
+    #    hook  webhook laradock
+    #    hook_type   generic
+    #}
+
+}
+
+laradock2.demo:80 {
+    # Create a Proxy and cors.
+    #proxy domain.com
+	#cors
+}
+
+laradock3.demo:80 {
+    import authlist.conf
+    root /var/www/public
+}

caddy/caddy/authlist.conf

@@ -0,0 +1 @@
+basicauth / laradock laradock

certbot/Dockerfile

@@ -1,6 +1,6 @@
 FROM phusion/baseimage:latest
 
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
 
 COPY run-certbot.sh /root/certbot/run-certbot.sh
 

docker-compose.sync.yml

@@ -0,0 +1,8 @@
+version: '3'
+
+services:
+
+volumes:
+  applications-sync:
+    external:
+      name: "applications-docker-sync"

docker-sync.yml

@@ -0,0 +1,13 @@
+version: "2"
+
+options:
+  verbose: false
+syncs:
+  applications-docker-sync: # name of the intermediary sync volume
+    compose-dev-file-path: 'docker-compose.sync.yml' # docker-compose override file
+
+    src: '${APP_CODE_PATH_HOST}' # host source directory
+    sync_userid: 1000 # giving permissions to www-data user (as defined in nginx and php-fpm Dockerfiles)
+    sync_strategy: '${DOCKER_SYNC_STRATEGY}' # for osx use 'native_osx', for windows use 'unison'
+
+    sync_excludes: ['laradock', 'ignored_folder_example'] # ignored directories

elasticsearch/Dockerfile

@@ -1,5 +1,3 @@
-FROM elasticsearch:latest
-
-MAINTAINER Bo-Yi Wu <appleboy.tw@gmail.com>
+FROM docker.elastic.co/elasticsearch/elasticsearch:6.2.3
 
 EXPOSE 9200 9300

env-example

@@ -1,130 +1,234 @@
-############################
-# General Setup
-############################
+###########################################################
+###################### General Setup ######################
+###########################################################
 
-### Application Path
-# Point to your application code, will be available at `/var/www`.
+### Paths #################################################
 
-APPLICATION=../
+# Point to the path of your applications code on your host
+APP_CODE_PATH_HOST=../
 
-### Data Path:
-# For all storage systems.
+# Point to where the `APP_CODE_PATH_HOST` should be in the container. You may add flags to the path `:cached`, `:delegated`. When using Docker Sync add `:nocopy`
+APP_CODE_PATH_CONTAINER=/var/www:cached
 
-DATA_SAVE_PATH=~/.laradock/data
+# Choose storage path on your machine. For all storage systems
+DATA_PATH_HOST=~/.laradock/data
 
-### PHP version
-# Applies to the Workspace and PHP-FPM containers (Does not apply to HHVM)
-# Accepted values: 71 - 70 - 56
+### Drivers ################################################
 
-PHP_VERSION=71
+# All volumes driver
+VOLUMES_DRIVER=local
 
-### PHP interpreter
-# Accepted values: hhvm - php-fpm
+# All Networks driver
+NETWORKS_DRIVER=bridge
 
+### Docker compose files ##################################
+
+# Select which docker-compose files to include. If using docker-sync append `:docker-compose.sync.yml` at the end
+COMPOSE_FILE=docker-compose.yml
+
+# Change the separator from : to ; on Windows
+COMPOSE_PATH_SEPARATOR=:
+
+# Define the prefix of container names. This is useful if you have multiple projects that use laradock to have seperate containers per project.
+COMPOSE_PROJECT_NAME=laradock
+
+### PHP Version ###########################################
+
+# Select a PHP version of the Workspace and PHP-FPM containers (Does not apply to HHVM). Accepted values: 7.2 - 7.1 - 7.0 - 5.6
+PHP_VERSION=7.2
+
+### PHP Interpreter #######################################
+
+# Select the PHP Interpreter. Accepted values: hhvm - php-fpm
 PHP_INTERPRETER=php-fpm
 
-############################
-# Containers Customization
-############################
+### Docker Host IP ########################################
 
-### WORKSPACE ##########################################################################################################
+# Enter your Docker Host IP (will be appended to /etc/hosts). Default is `10.0.75.1`
+DOCKER_HOST_IP=10.0.75.1
 
+### Remote Interpreter ####################################
+
+# Choose a Remote Interpreter entry matching name. Default is `laradock`
+PHP_IDE_CONFIG=serverName=laradock
+
+### Windows Path ##########################################
+
+# A fix for Windows users, to ensure the application path works
+COMPOSE_CONVERT_WINDOWS_PATHS=1
+
+### Environment ###########################################
+
+# If you need to change the sources (i.e. to China), set CHANGE_SOURCE to true
+CHANGE_SOURCE=false
+
+### Docker Sync ###########################################
+
+# If you are using Docker Sync. For `osx` use 'native_osx', for `windows` use 'unison', for `linux` docker-sync is not required
+DOCKER_SYNC_STRATEGY=native_osx
+
+###########################################################
+################ Containers Customization #################
+###########################################################
+
+### WORKSPACE #############################################
+
+WORKSPACE_COMPOSER_GLOBAL_INSTALL=true
+WORKSPACE_COMPOSER_REPO_PACKAGIST=
+WORKSPACE_INSTALL_NODE=true
+WORKSPACE_NODE_VERSION=node
+WORKSPACE_NPM_REGISTRY=
+WORKSPACE_INSTALL_YARN=true
+WORKSPACE_YARN_VERSION=latest
+WORKSPACE_INSTALL_NPM_GULP=true
+WORKSPACE_INSTALL_NPM_BOWER=false
+WORKSPACE_INSTALL_NPM_VUE_CLI=true
+WORKSPACE_INSTALL_PHPREDIS=true
+WORKSPACE_INSTALL_WORKSPACE_SSH=false
+WORKSPACE_INSTALL_SUBVERSION=false
 WORKSPACE_INSTALL_XDEBUG=false
+WORKSPACE_INSTALL_PHPDBG=false
+WORKSPACE_INSTALL_SSH2=false
+WORKSPACE_INSTALL_LDAP=false
+WORKSPACE_INSTALL_GMP=false
 WORKSPACE_INSTALL_SOAP=false
+WORKSPACE_INSTALL_IMAP=false
 WORKSPACE_INSTALL_MONGO=false
+WORKSPACE_INSTALL_AMQP=false
 WORKSPACE_INSTALL_MSSQL=false
-WORKSPACE_INSTALL_NODE=false
-WORKSPACE_INSTALL_YARN=false
 WORKSPACE_INSTALL_DRUSH=false
+WORKSPACE_DRUSH_VERSION=8.1.17
+WORKSPACE_INSTALL_DRUPAL_CONSOLE=false
 WORKSPACE_INSTALL_AEROSPIKE=false
 WORKSPACE_INSTALL_V8JS=false
-WORKSPACE_COMPOSER_GLOBAL_INSTALL=false
-WORKSPACE_INSTALL_WORKSPACE_SSH=false
 WORKSPACE_INSTALL_LARAVEL_ENVOY=false
 WORKSPACE_INSTALL_LARAVEL_INSTALLER=false
 WORKSPACE_INSTALL_DEPLOYER=false
+WORKSPACE_INSTALL_PRESTISSIMO=false
 WORKSPACE_INSTALL_LINUXBREW=false
 WORKSPACE_INSTALL_MC=false
+WORKSPACE_INSTALL_SYMFONY=false
+WORKSPACE_INSTALL_PYTHON=false
+WORKSPACE_INSTALL_IMAGE_OPTIMIZERS=false
+WORKSPACE_INSTALL_IMAGEMAGICK=false
+WORKSPACE_INSTALL_TERRAFORM=false
+WORKSPACE_INSTALL_DUSK_DEPS=false
+WORKSPACE_INSTALL_PG_CLIENT=false
+WORKSPACE_INSTALL_SWOOLE=false
+WORKSPACE_INSTALL_LIBPNG=false
+WORKSPACE_INSTALL_IONCUBE=false
 WORKSPACE_PUID=1000
 WORKSPACE_PGID=1000
-WORKSPACE_NODE_VERSION=stable
-WORKSPACE_YARN_VERSION=latest
+WORKSPACE_CHROME_DRIVER_VERSION=2.32
 WORKSPACE_TIMEZONE=UTC
 WORKSPACE_SSH_PORT=2222
 
-### PHP_FPM ############################################################################################################
+### PHP_FPM ###############################################
 
-PHP_FPM_INSTALL_XDEBUG=false
-PHP_FPM_INSTALL_MONGO=false
-PHP_FPM_INSTALL_MSSQL=false
-PHP_FPM_INSTALL_SOAP=false
-PHP_FPM_INSTALL_ZIP_ARCHIVE=false
-PHP_FPM_INSTALL_BCMATH=false
-PHP_FPM_INSTALL_PHPREDIS=false
+PHP_FPM_INSTALL_ZIP_ARCHIVE=true
+PHP_FPM_INSTALL_BCMATH=true
+PHP_FPM_INSTALL_MYSQLI=true
+PHP_FPM_INSTALL_TOKENIZER=true
+PHP_FPM_INSTALL_INTL=true
+PHP_FPM_INSTALL_IMAGEMAGICK=true
+PHP_FPM_INSTALL_OPCACHE=true
+PHP_FPM_INSTALL_IMAGE_OPTIMIZERS=true
+PHP_FPM_INSTALL_PHPREDIS=true
 PHP_FPM_INSTALL_MEMCACHED=false
-PHP_FPM_INSTALL_OPCACHE=false
+PHP_FPM_INSTALL_XDEBUG=false
+PHP_FPM_INSTALL_PHPDBG=false
+PHP_FPM_INSTALL_IMAP=false
+PHP_FPM_INSTALL_MONGO=false
+PHP_FPM_INSTALL_AMQP=false
+PHP_FPM_INSTALL_MSSQL=false
+PHP_FPM_INSTALL_SSH2=false
+PHP_FPM_INSTALL_SOAP=false
+PHP_FPM_INSTALL_GMP=false
 PHP_FPM_INSTALL_EXIF=false
 PHP_FPM_INSTALL_AEROSPIKE=false
-PHP_FPM_INSTALL_MYSQLI=false
-PHP_FPM_INSTALL_TOKENIZER=false
-PHP_FPM_INSTALL_INTL=false
+PHP_FPM_INSTALL_PGSQL=false
 PHP_FPM_INSTALL_GHOSTSCRIPT=false
 PHP_FPM_INSTALL_LDAP=false
 PHP_FPM_INSTALL_SWOOLE=false
+PHP_FPM_INSTALL_PG_CLIENT=false
+PHP_FPM_INSTALL_PCNTL=false
+PHP_FPM_INSTALL_CALENDAR=false
+PHP_FPM_INSTALL_FAKETIME=false
+PHP_FPM_INSTALL_IONCUBE=false
+PHP_FPM_FAKETIME=-0
 
-### NGINX ##############################################################################################################
+### PHP_WORKER ############################################
+
+PHP_WORKER_INSTALL_PGSQL=false
+PHP_WORKER_INSTALL_BCMATH=false
+
+### NGINX #################################################
 
 NGINX_HOST_HTTP_PORT=80
 NGINX_HOST_HTTPS_PORT=443
 NGINX_HOST_LOG_PATH=./logs/nginx/
 NGINX_SITES_PATH=./nginx/sites/
+NGINX_PHP_UPSTREAM_CONTAINER=php-fpm
+NGINX_PHP_UPSTREAM_PORT=9000
 
-### APACHE #############################################################################################################
+### APACHE ################################################
 
 APACHE_HOST_HTTP_PORT=80
 APACHE_HOST_HTTPS_PORT=443
-APACHE2_PHP_SOCKET=php-fpm:9000
 APACHE_HOST_LOG_PATH=./logs/apache2
-PHP_SOCKET=php-fpm:9000
+APACHE_SITES_PATH=./apache2/sites
+APACHE_PHP_UPSTREAM_CONTAINER=php-fpm
+APACHE_PHP_UPSTREAM_PORT=9000
+APACHE_PHP_UPSTREAM_TIMEOUT=60
+APACHE_DOCUMENT_ROOT=/var/www/
 
-### MYSQL ##############################################################################################################
+### MYSQL #################################################
 
+MYSQL_VERSION=latest
 MYSQL_DATABASE=default
 MYSQL_USER=default
 MYSQL_PASSWORD=secret
 MYSQL_PORT=3306
 MYSQL_ROOT_PASSWORD=root
+MYSQL_ENTRYPOINT_INITDB=./mysql/docker-entrypoint-initdb.d
 
-### Percona ############################################################################################################
+### REDIS #################################################
+
+REDIS_PORT=6379
+
+### Percona ###############################################
 
 PERCONA_DATABASE=homestead
 PERCONA_USER=homestead
 PERCONA_PASSWORD=secret
 PERCONA_PORT=3306
 PERCONA_ROOT_PASSWORD=root
+PERCONA_ENTRYPOINT_INITDB=./percona/docker-entrypoint-initdb.d
 
-### MSSQL ##############################################################################################################
+### MSSQL #################################################
 
 MSSQL_DATABASE=homestead
 MSSQL_PASSWORD=yourStrong(!)Password
 MSSQL_PORT=1433
 
-### MARIADB ############################################################################################################
+### MARIADB ###############################################
 
 MARIADB_DATABASE=default
 MARIADB_USER=default
 MARIADB_PASSWORD=secret
 MARIADB_PORT=3306
 MARIADB_ROOT_PASSWORD=root
+MARIADB_ENTRYPOINT_INITDB=./mariadb/docker-entrypoint-initdb.d
 
-### POSTGRES ###########################################################################################################
+### POSTGRES ##############################################
 
 POSTGRES_DB=default
 POSTGRES_USER=default
 POSTGRES_PASSWORD=secret
 POSTGRES_PORT=5432
+POSTGRES_ENTRYPOINT_INITDB=./postgres/docker-entrypoint-initdb.d
 
-### RABBITMQ ###########################################################################################################
+### RABBITMQ ##############################################
 
 RABBITMQ_NODE_HOST_PORT=5672
 RABBITMQ_MANAGEMENT_HTTP_HOST_PORT=15672
@@ -132,43 +236,43 @@ RABBITMQ_MANAGEMENT_HTTPS_HOST_PORT=15671
 RABBITMQ_DEFAULT_USER=guest
 RABBITMQ_DEFAULT_PASS=guest
 
-### ELASTICSEARCH ######################################################################################################
+### ELASTICSEARCH #########################################
 
 ELASTICSEARCH_HOST_HTTP_PORT=9200
 ELASTICSEARCH_HOST_TRANSPORT_PORT=9300
 
-### KIBANA #############################################################################################################
+### KIBANA ################################################
 
 KIBANA_HTTP_PORT=5601
 
-### MEMCACHED ##########################################################################################################
+### MEMCACHED #############################################
 
 MEMCACHED_HOST_PORT=11211
 
-### BEANSTALKD CONSOLE #################################################################################################
+### BEANSTALKD CONSOLE ####################################
 
 BEANSTALKD_CONSOLE_BUILD_PATH=./beanstalkd-console
 BEANSTALKD_CONSOLE_CONTAINER_NAME=beanstalkd-console
 BEANSTALKD_CONSOLE_HOST_PORT=2080
 
-### BEANSTALKD #########################################################################################################
+### BEANSTALKD ############################################
 
 BEANSTALKD_HOST_PORT=11300
 
-### SELENIUM ###########################################################################################################
+### SELENIUM ##############################################
 
 SELENIUM_PORT=4444
 
-### MINIO ##############################################################################################################
+### MINIO #################################################
 
 MINIO_PORT=9000
 
-### ADMINER ############################################################################################################
+### ADMINER ###############################################
 
 ADM_PORT=8080
 ADM_INSTALL_MSSQL=false
 
-### PHP MY ADMIN #######################################################################################################
+### PHP MY ADMIN ##########################################
 
 # Accepted values: mariadb - mysql
 
@@ -181,97 +285,201 @@ PMA_PASSWORD=secret
 PMA_ROOT_PASSWORD=secret
 PMA_PORT=8080
 
-### VARNISH ############################################################################################################
+### MAILDEV ###############################################
+
+MAILDEV_HTTP_PORT=1080
+MAILDEV_SMTP_PORT=25
+
+### VARNISH ###############################################
 
 VARNISH_CONFIG=/etc/varnish/default.vcl
 VARNISH_PORT=8080
 VARNISH_BACKEND_PORT=8888
 VARNISHD_PARAMS=-p default_ttl=3600 -p default_grace=3600
 
-### Varnish ############################################################################################################
+### Varnish ###############################################
 
 # Proxy 1
-
 VARNISH_PROXY1_CACHE_SIZE=128m
 VARNISH_PROXY1_BACKEND_HOST=workspace
 VARNISH_PROXY1_SERVER=SERVER1
 
 # Proxy 2
-
 VARNISH_PROXY2_CACHE_SIZE=128m
 VARNISH_PROXY2_BACKEND_HOST=workspace
 VARNISH_PROXY2_SERVER=SERVER2
 
-### HAPROXY ############################################################################################################
+### HAPROXY ###############################################
 
 HAPROXY_HOST_HTTP_PORT=8085
 
-### JENKINS ############################################################################################################
+### JENKINS ###############################################
 
 JENKINS_HOST_HTTP_PORT=8090
 JENKINS_HOST_SLAVE_AGENT_PORT=50000
 JENKINS_HOME=./jenkins/jenkins_home
 
-### BLACKFIRE ##########################################################################################################
+### GRAFANA ###############################################
 
-# Create an account on blackfire.io. Don't enable blackfire and xDebug at the same time.
-# visit https://blackfire.io/docs/24-days/06-installation#install-probe-debian for more info.
+GRAFANA_PORT=3000
 
+### BLACKFIRE #############################################
+
+# Create an account on blackfire.io. Don't enable blackfire and xDebug at the same time. # visit https://blackfire.io/docs/24-days/06-installation#install-probe-debian for more info.
 INSTALL_BLACKFIRE=false
 BLACKFIRE_CLIENT_ID=<client_id>
 BLACKFIRE_CLIENT_TOKEN=<client_token>
 BLACKFIRE_SERVER_ID=<server_id>
 BLACKFIRE_SERVER_TOKEN=<server_token>
 
-### AEROSPIKE ##########################################################################################################
+### AEROSPIKE #############################################
 
 AEROSPIKE_SERVICE_PORT=3000
 AEROSPIKE_FABRIC_PORT=3001
 AEROSPIKE_HEARTBEAT_PORT=3002
 AEROSPIKE_INFO_PORT=3003
 
-### RETHINKDB ##########################################################################################################
+## Temp solution, this should be in the dockerfile
+# for all versions "https://github.com/aerospike/aerospike-client-php/archive/master.tar.gz"
+# for php 7.2 (using this branch until the support for 7.2 on master) "https://github.com/aerospike/aerospike-client-php/archive/7.2.0-release-candidate.tar.gz"
+AEROSPIKE_PHP_REPOSITORY=https://github.com/aerospike/aerospike-client-php/archive/7.2.0-release-candidate.tar.gz
+# for php 5.6
+# AEROSPIKE_PHP_REPOSITORY=https://github.com/aerospike/aerospike-client-php5/archive/3.4.15.tar.gz
+
+### RETHINKDB #############################################
 
 RETHINKDB_PORT=8090
 
-### MONGODB ############################################################################################################
+### MONGODB ###############################################
 
 MONGODB_PORT=27017
 
-### CADDY ##############################################################################################################
+### CADDY #################################################
 
 CADDY_HOST_HTTP_PORT=80
 CADDY_HOST_HTTPS_PORT=443
 CADDY_HOST_LOG_PATH=./logs/caddy
-CADDY_CUSTOM_CADDYFILE=./caddy/Caddyfile
+CADDY_CONFIG_PATH=./caddy/caddy
 
-### LARAVEL ECHO SERVER ################################################################################################
+### LARAVEL ECHO SERVER ###################################
 
 LARAVEL_ECHO_SERVER_PORT=6001
 
+### SOLR ##################################################
 
-##### TO BE CONTINUE .................................
+SOLR_VERSION=5.5
+SOLR_PORT=8983
+SOLR_DATAIMPORTHANDLER_MYSQL=false
 
-# ......... Missing: neo4j mongo rethinkdb redis aerospike pgadmin...
-# .........
-# .........
+### GITLAB ###############################################
+GITLAB_HOST_HTTP_PORT=8989
+GITLAB_HOST_HTTPS_PORT=9898
+GITLAB_HOST_SSH_PORT=2289
+GITLAB_DOMAIN_NAME=http://localhost
+GITLAB_ROOT_PASSWORD=laradock
+GITLAB_HOST_LOG_PATH=./logs/gitlab
 
+### JUPYTERHUB ###############################################
+JUPYTERHUB_POSTGRES_HOST=postgres
+JUPYTERHUB_POSTGRES_USER=laradock_jupyterhub
+JUPYTERHUB_POSTGRES_PASSWORD=laradock_jupyterhub
+JUPYTERHUB_POSTGRES_DB=laradock_jupyterhub
+JUPYTERHUB_PORT=9991
+JUPYTERHUB_OAUTH_CALLBACK_URL=http://laradock:9991/hub/oauth_callback
+JUPYTERHUB_OAUTH_CLIENT_ID={GITHUB_CLIENT_ID}
+JUPYTERHUB_OAUTH_CLIENT_SECRET={GITHUB_CLIENT_SECRET}
+JUPYTERHUB_LOCAL_NOTEBOOK_IMAGE=laradock_jupyterhub-user
+JUPYTERHUB_CUSTOM_CONFIG=./jupyterhub/jupyterhub_config.py
+JUPYTERHUB_USER_DATA=/jupyterhub
+JUPYTERHUB_USER_LIST=./jupyterhub/userlist
 
+### IPYTHON ##################################################
+LARADOCK_IPYTHON_CONTROLLER_IP=127.0.0.1
 
-############################
-# Miscellaneous
-############################
+### NETDATA ###############################################
+NETDATA_PORT=19999
 
-# Replace with your Docker Host IP (will be appended to /etc/hosts)
+### PHPREDISADMIN #########################################
+REDIS_WEBUI_USERNAME=laradock
+REDIS_WEBUI_PASSWORD=laradock
+REDIS_WEBUI_CONNECT_HOST=redis
+REDIS_WEBUI_CONNECT_PORT=6379
+REDIS_WEBUI_PORT=9987
 
-DOCKER_HOST_IP=10.0.75.1
+### MONGOWEBUI ###############################################
+MONGO_WEBUI_PORT=3000
+MONGO_WEBUI_ROOT_URL=http://localhost
+MONGO_WEBUI_MONGO_URL=mongodb://mongo:27017/
+MONGO_WEBUI_INSTALL_MONGO=false
 
+### METABASE ###############################################
+METABASE_PORT=3030
+METABASE_DB_FILE=metabase.db
+METABASE_JAVA_TIMEZONE=US/Pacific
 
-# The Remote Interpreter entry matching name `laradock`
+### IDE ###############################################
+IDE_THEIA_PORT=987
+IDE_WEBIDE_PORT=984
+IDE_CODIAD_PORT=985
+IDE_ICECODER_PORT=986
 
-PHP_IDE_CONFIG=serverName=laradock
-
-
-# Fix for windows users to make sure the application path works.
-
-COMPOSE_CONVERT_WINDOWS_PATHS=1
+### MAILU ###############################################
+MAILU_VERSION=latest
+MAILU_RECAPTCHA_PUBLIC_KEY=<YOUR_RECAPTCHA_PUBLIC_KEY>
+MAILU_RECAPTCHA_PRIVATE_KEY=<YOUR_RECAPTCHA_PRIVATE_KEY>
+# Main mail domain
+MAILU_HTTP_PORT=6080
+MAILU_HTTPS_PORT=60443
+MAILU_DOMAIN=example.com
+MAILU_INIT_ADMIN_USERNAME=laradock
+MAILU_INIT_ADMIN_PASSWORD=laradock
+# Hostnames for this server, separated with comas
+MAILU_HOSTNAMES=mail.example.com,alternative.example.com,yetanother.example.com
+# Postmaster local part (will append the main mail domain)
+MAILU_POSTMASTER=admin
+# Set to a randomly generated 16 bytes string
+MAILU_SECRET_KEY=ChangeMeChangeMe
+# Choose how secure connections will behave (value: letsencrypt, cert, notls, mail)
+MAILU_TLS_FLAVOR=cert
+# Authentication rate limit (per source IP address)
+MAILU_AUTH_RATELIMIT=10/minute;1000/hour
+# Opt-out of statistics, replace with "True" to opt out
+MAILU_DISABLE_STATISTICS=False
+# Message size limit in bytes
+# Default: accept messages up to 50MB
+MAILU_MESSAGE_SIZE_LIMIT=50000000
+# Will relay all outgoing mails if configured
+MAILU_RELAYHOST=
+# Networks granted relay permissions, make sure that you include your Docker
+# internal network (default to 172.17.0.0/16)
+MAILU_RELAYNETS=172.16.0.0/12
+# Fetchmail delay
+MAILU_FETCHMAIL_DELAY=600
+# Recipient delimiter, character used to delimiter localpart from custom address part
+# e.g. localpart+custom@domain;tld
+MAILU_RECIPIENT_DELIMITER=+
+# DMARC rua and ruf email
+MAILU_DMARC_RUA=admin
+MAILU_DMARC_RUF=admin
+# Weclome email, enable and set a topic and body if you wish to send welcome
+# emails to all users.
+MAILU_WELCOME=True
+MAILU_WELCOME_SUBJECT=Welcome to your new email account
+MAILU_WELCOME_BODY=Welcome to your new email account, if you can read this, then it is configured properly!
+# Path to the admin interface if enabled
+MAILU_WEB_ADMIN=/admin
+# Path to the webmail if enabled
+MAILU_WEB_WEBMAIL=/webmail
+# Website name
+MAILU_SITENAME=Example Mail
+# Linked Website URL
+MAILU_WEBSITE=http://mail.example.com
+# Default password scheme used for newly created accounts and changed passwords
+# (value: SHA512-CRYPT, SHA256-CRYPT, MD5-CRYPT, CRYPT)
+MAILU_PASSWORD_SCHEME=SHA512-CRYPT
+# Expose the admin interface (value: true, false)
+MAILU_ADMIN=true
+# Choose which webmail to run if any (values: roundcube, rainloop, none)
+MAILU_WEBMAIL=rainloop
+# Dav server implementation (value: radicale, none)
+MAILU_WEBDAV=radicale

gitlab/Dockerfile

@@ -0,0 +1,3 @@
+FROM gitlab/gitlab-ce:latest
+
+LABEL maintainer="ahkui <ahkui@outlook.com>"

grafana/Dockerfile

@@ -0,0 +1,3 @@
+FROM grafana/grafana:latest
+
+EXPOSE 3000

haproxy/Dockerfile

@@ -1,5 +1,5 @@
 FROM dockercloud/haproxy:latest
 
-MAINTAINER ZeroC0D3 Team<zeroc0d3.team@gmail.com>
+LABEL maintainer="ZeroC0D3 Team<zeroc0d3.team@gmail.com>"
 
 EXPOSE 80

hhvm/Dockerfile

@@ -1,11 +1,12 @@
 FROM ubuntu:14.04
 
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
 
 RUN apt-key adv --recv-keys --keyserver hkp://keyserver.ubuntu.com:80 0x5a16e7281be7a449
 
 RUN apt-get update -y \
-    && apt-get install -y software-properties-common \
+    && apt-get install -y software-properties-common wget \
+    && wget -O - http://dl.hhvm.com/conf/hhvm.gpg.key | sudo apt-key add - \
     && add-apt-repository "deb http://dl.hhvm.com/ubuntu $(lsb_release -sc) main" \
     && apt-get update -y \
     && apt-get install -y hhvm \
@@ -14,7 +15,7 @@ RUN apt-get update -y \
 
 RUN mkdir -p /var/www
 
-ADD server.ini /etc/hhvm/server.ini
+COPY server.ini /etc/hhvm/server.ini
 
 RUN usermod -u 1000 www-data
 

ide-codiad/Dockerfile

@@ -0,0 +1,5 @@
+FROM linuxserver/codiad
+
+LABEL maintainer="ahkui <ahkui@outlook.com>"
+
+COPY config.php /defaults/config.php

ide-codiad/config.php

@@ -0,0 +1,43 @@
+<?php
+/*
+*  Copyright (c) Codiad & Kent Safranski (codiad.com), distributed
+*  as-is and without warranty under the MIT License. See
+*  [root]/license.txt for more. This information must remain intact.
+*/
+//////////////////////////////////////////////////////////////////
+// CONFIG
+//////////////////////////////////////////////////////////////////
+// PATH TO CODIAD
+define("BASE_PATH", "/config/www/");
+// BASE URL TO CODIAD (without trailing slash)
+define("BASE_URL", "localhost");
+// THEME : default, modern or clear (look at /themes)
+define("THEME", "default");
+// ABSOLUTE PATH, this is used as whitelist for absolute path projects
+define("WHITEPATHS", BASE_PATH . ",/home,/");
+// SESSIONS (e.g. 7200)
+$cookie_lifetime = "0";
+// TIMEZONE
+date_default_timezone_set(getenv('TZ','UTC'));
+// Allows to overwrite the default language
+//define("LANGUAGE", "en");
+// External Authentification
+//define("AUTH_PATH", "/path/to/customauth.php");
+//////////////////////////////////////////////////////////////////
+// ** DO NOT EDIT CONFIG BELOW **
+//////////////////////////////////////////////////////////////////
+// PATHS
+define("COMPONENTS", BASE_PATH . "/components");
+define("PLUGINS", BASE_PATH . "/plugins");
+define("THEMES", BASE_PATH . "/themes");
+define("DATA", BASE_PATH . "/data");
+define("WORKSPACE", getenv('APP_CODE_PATH_CONTAINER',BASE_PATH . "workspace"));
+// URLS
+define("WSURL", getenv('APP_CODE_PATH_CONTAINER',BASE_PATH . "workspace"));
+// Marketplace
+define("MARKETURL", "http://market.codiad.com/json");
+// Update Check
+//define("UPDATEURL", "http://update.codiad.com/?v={VER}&o={OS}&p={PHP}&w={WEB}&a={ACT}");
+define("ARCHIVEURL", "https://github.com/Codiad/Codiad/archive/master.zip");
+define("COMMITURL", "https://api.github.com/repos/Codiad/Codiad/commits");
+?>

ide-icecoder/Dockerfile

@@ -0,0 +1,21 @@
+FROM php:alpine
+
+LABEL maintainer="ahkui <ahkui@outlook.com>"
+
+ARG PUID=1000
+ENV PUID ${PUID}
+ARG PGID=1000
+ENV PGID ${PGID}
+
+RUN apk add --no-cache git
+
+RUN addgroup -g $PGID -S laradock && \
+    adduser -u $PUID -S laradock -G laradock
+
+USER laradock
+
+RUN cd /home/laradock && git clone https://github.com/mattpass/ICEcoder.git
+
+WORKDIR /home/laradock/ICEcoder
+
+CMD ["php","-S","0.0.0.0:8080"]

ide-theia/Dockerfile

@@ -0,0 +1,5 @@
+FROM theiaide/theia
+
+LABEL maintainer="ahkui <ahkui@outlook.com>"
+
+RUN echo 'fs.inotify.max_user_watches=524288' >> /etc/sysctl.conf

ide-webide/Dockerfile

@@ -0,0 +1,3 @@
+FROM webide/webide
+
+LABEL maintainer="ahkui <ahkui@outlook.com>"

ipython/Dockerfile.controller

@@ -0,0 +1,17 @@
+FROM python:3.5-alpine
+
+LABEL maintainer="ahkui <ahkui@outlook.com>"
+
+USER root
+
+RUN apk add --no-cache build-base
+
+RUN python -m pip --quiet --no-cache-dir install \
+        ipyparallel
+
+RUN ipython profile create --parallel --profile=default
+
+COPY ipcontroller-client.json /root/.ipython/profile_default/security/ipcontroller-client.json
+COPY ipcontroller-engine.json /root/.ipython/profile_default/security/ipcontroller-engine.json
+
+CMD ["sh","-c","ipcontroller --ip=* --reuse"]

ipython/Dockerfile.engine

@@ -0,0 +1,23 @@
+FROM python:3.5-alpine
+
+LABEL maintainer="ahkui <ahkui@outlook.com>"
+
+USER root
+
+RUN apk add --no-cache build-base
+
+RUN python -m pip --quiet --no-cache-dir install \
+        ipyparallel \
+        numpy \
+        pandas \
+        pymongo \
+        redis \
+        requests \
+        bs4
+
+RUN ipython profile create --parallel --profile=default
+
+COPY ipcontroller-client.json /root/.ipython/profile_default/security/ipcontroller-client.json
+COPY ipcontroller-engine.json /root/.ipython/profile_default/security/ipcontroller-engine.json
+
+CMD ["sh","-c","ipcluster engines"]

ipython/ipcontroller-client.json

@@ -0,0 +1,16 @@
+{
+  "key": "868074dd-060311910ab3d6991611bccf",
+  "signature_scheme": "hmac-sha256",
+  "unpack": "json",
+  "pack": "json",
+  "ssh": "",
+  "task_scheme": "leastload",
+  "interface": "tcp://*",
+  "location": "laradock-ipython",
+  "notification": 33338,
+  "iopub": 33337,
+  "control": 33336,
+  "mux": 33335,
+  "task": 33334,
+  "registration": 33333
+}

ipython/ipcontroller-engine.json

@@ -0,0 +1,16 @@
+{
+  "key": "868074dd-060311910ab3d6991611bccf",
+  "signature_scheme": "hmac-sha256",
+  "unpack": "json",
+  "pack": "json",
+  "ssh": "",
+  "interface": "tcp://*",
+  "location": "laradock-ipython",
+  "iopub": 33327,
+  "hb_ping": 33328,
+  "hb_pong": 33329,
+  "control": 33330,
+  "mux": 33331,
+  "task": 33332,
+  "registration": 33333
+}

jenkins/Dockerfile

@@ -25,8 +25,8 @@ VOLUME /var/jenkins_home
 # or config file with your custom jenkins Docker image.
 RUN mkdir -p /usr/share/jenkins/ref/init.groovy.d
 
-ENV TINI_VERSION 0.13.2
-ENV TINI_SHA afbf8de8a63ce8e4f18cb3f34dfdbbd354af68a1
+ENV TINI_VERSION 0.16.1
+ENV TINI_SHA d1cb5d71adc01d47e302ea439d70c79bd0864288
 
 # Use tini as subreaper in Docker container to adopt zombie processes 
 RUN curl -fsSL https://github.com/krallin/tini/releases/download/v${TINI_VERSION}/tini-static-amd64 -o /bin/tini && chmod +x /bin/tini \
@@ -36,10 +36,12 @@ COPY init.groovy /usr/share/jenkins/ref/init.groovy.d/tcp-slave-agent-port.groov
 
 # jenkins version being bundled in this docker image
 ARG JENKINS_VERSION
-ENV JENKINS_VERSION ${JENKINS_VERSION:-2.32.3}
+ENV JENKINS_VERSION ${JENKINS_VERSION:-2.89.2}
 
 # jenkins.war checksum, download will be validated using it
-ARG JENKINS_SHA=a25b9a314ca9e76f9673da7309e1882e32674223
+# 2.89.2
+ARG JENKINS_SHA=014f669f32bc6e925e926e260503670b32662f006799b133a031a70a794c8a14
+
 
 # Can be used to customize where jenkins.war get downloaded from
 ARG JENKINS_URL=https://repo.jenkins-ci.org/public/org/jenkins-ci/main/jenkins-war/${JENKINS_VERSION}/jenkins-war-${JENKINS_VERSION}.war
@@ -47,7 +49,7 @@ ARG JENKINS_URL=https://repo.jenkins-ci.org/public/org/jenkins-ci/main/jenkins-w
 # could use ADD but this one does not check Last-Modified header neither does it allow to control checksum 
 # see https://github.com/docker/docker/issues/8331
 RUN curl -fsSL ${JENKINS_URL} -o /usr/share/jenkins/jenkins.war \
-  && echo "${JENKINS_SHA}  /usr/share/jenkins/jenkins.war" | sha1sum -c -
+  && echo "${JENKINS_SHA}  /usr/share/jenkins/jenkins.war" | sha256sum -c -
 
 ENV JENKINS_UC https://updates.jenkins.io
 RUN chown -R ${user} "$JENKINS_HOME" /usr/share/jenkins/ref
@@ -71,7 +73,7 @@ RUN apt-get install -y curl && curl -sSL https://get.docker.com/ | sh
 RUN usermod -aG docker jenkins
 
 # Install Docker-Compose
-RUN curl -L "https://github.com/docker/compose/releases/download/1.10.0/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
+RUN curl -L "https://github.com/docker/compose/releases/download/1.16.1/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
 RUN chmod +x /usr/local/bin/docker-compose
 
 

jenkins/README.md

@@ -93,7 +93,7 @@ docker run --name myjenkins -p 8080:8080 -p 50000:50000 --env JAVA_OPTS="-Djava.
 ```
 
 # Configuring reverse proxy
-If you want to install Jenkins behind a reverse proxy with prefix, example: mysite.com/jenkins, you need to add environnement variable `JENKINS_OPTS="--prefix=/jenkins"` and then follow the below procedures to configure your reverse proxy, which will depend if you have Apache ou Nginx:
+If you want to install Jenkins behind a reverse proxy with prefix, example: mysite.com/jenkins, you need to add environment variable `JENKINS_OPTS="--prefix=/jenkins"` and then follow the below procedures to configure your reverse proxy, which will depend if you have Apache ou Nginx:
 - [Apache](https://wiki.jenkins-ci.org/display/JENKINS/Running+Jenkins+behind+Apache)
 - [Nginx](https://wiki.jenkins-ci.org/display/JENKINS/Jenkins+behind+an+NGinX+reverse+proxy)
 
@@ -154,7 +154,7 @@ COPY custom.groovy /usr/share/jenkins/ref/init.groovy.d/custom.groovy
 ## Preinstalling plugins
 
 You can rely on the `install-plugins.sh` script to pass a set of plugins to download with their dependencies.
-Use plugin artifact ID, whithout `-plugin` extension, and append the version if needed separated by `:`.
+Use plugin artifact ID, without `-plugin` extension, and append the version if needed separated by `:`.
 Dependencies that are already included in the Jenkins war will only be downloaded if their required version is newer than the one included.
 
 ```

jupyterhub/Dockerfile

@@ -0,0 +1,26 @@
+FROM python
+LABEL maintainer="ahkui <ahkui@outlook.com>"
+
+ENV JUPYTERHUB_USER_DATA ${JUPYTERHUB_USER_DATA}
+ENV JUPYTERHUB_POSTGRES_DB ${JUPYTERHUB_POSTGRES_DB}
+ENV JUPYTERHUB_POSTGRES_USER ${JUPYTERHUB_POSTGRES_USER}
+ENV JUPYTERHUB_POSTGRES_HOST ${JUPYTERHUB_POSTGRES_HOST}
+ENV JUPYTERHUB_POSTGRES_PASSWORD ${JUPYTERHUB_POSTGRES_PASSWORD}
+ENV JUPYTERHUB_OAUTH_CALLBACK_URL ${JUPYTERHUB_OAUTH_CALLBACK_URL}
+ENV JUPYTERHUB_OAUTH_CLIENT_ID ${JUPYTERHUB_OAUTH_CLIENT_ID}
+ENV JUPYTERHUB_OAUTH_CLIENT_SECRET ${JUPYTERHUB_OAUTH_CLIENT_SECRET}
+ENV JUPYTERHUB_LOCAL_NOTEBOOK_IMAGE ${JUPYTERHUB_LOCAL_NOTEBOOK_IMAGE}
+
+RUN curl -sL https://deb.nodesource.com/setup_10.x | bash -
+
+RUN apt update -yqq && \
+    apt-get install -y nodejs
+    
+RUN npm install -g configurable-http-proxy
+
+RUN pip install jupyterhub
+RUN pip install oauthenticator
+RUN pip install dockerspawner
+RUN pip install psycopg2 psycopg2-binary
+
+CMD ["sh", "-c", "jupyterhub upgrade-db && jupyterhub -f /jupyterhub_config.py"]

jupyterhub/Dockerfile.user

@@ -0,0 +1,72 @@
+FROM tensorflow/tensorflow:latest-gpu
+
+MAINTAINER ahkui <ahkui@outlook.com>
+
+RUN apt-get update && apt-get install -y --no-install-recommends \
+        python \
+        python-dev \
+        && \
+    apt-get autoremove -y && \
+    apt-get autoclean && \
+    apt-get clean && \
+    rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
+
+RUN apt-get update && apt-get install -y --no-install-recommends \
+        wget \
+        git \
+        && \
+    apt-get autoremove -y && \
+    apt-get autoclean && \
+    apt-get clean && \
+    rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
+
+RUN curl -O https://bootstrap.pypa.io/get-pip.py && \
+    python3 get-pip.py && \
+    rm get-pip.py
+
+RUN python3 -m pip --quiet --no-cache-dir install \
+        Pillow \
+        h5py \
+        ipykernel \
+        jupyter \
+        notebook \
+        jupyterhub \
+        matplotlib \
+        numpy \
+        pandas \
+        scipy \
+        sklearn \
+        Flask \
+        gunicorn \
+        pymongo \
+        redis \
+        requests \
+        ipyparallel \
+        bs4 \
+        && \
+    python3 -m ipykernel.kernelspec
+
+RUN pip --no-cache-dir install \
+    https://storage.googleapis.com/tensorflow/linux/gpu/tensorflow_gpu-1.8.0-cp35-cp35m-linux_x86_64.whl
+
+RUN ln -s -f /usr/bin/python3 /usr/bin/python
+
+COPY start.sh /usr/local/bin/
+COPY start-notebook.sh /usr/local/bin/
+COPY start-singleuser.sh /usr/local/bin/
+RUN chmod +x /usr/local/bin/start.sh
+RUN chmod +x /usr/local/bin/start-notebook.sh
+RUN chmod +x /usr/local/bin/start-singleuser.sh
+
+RUN wget --quiet https://github.com/krallin/tini/releases/download/v0.10.0/tini && \
+    mv tini /usr/local/bin/tini && \
+    chmod +x /usr/local/bin/tini
+
+# cleanup
+RUN rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
+
+ENTRYPOINT ["tini", "--"]
+
+CMD ["start-notebook.sh"]
+
+

jupyterhub/jupyterhub_config.py

@@ -0,0 +1,121 @@
+# Copyright (c) Jupyter Development Team.
+# Distributed under the terms of the Modified BSD License.
+
+# Configuration file for JupyterHub
+import os
+
+c = get_config()
+
+def create_dir_hook(spawner):
+    username = spawner.user.name # get the username
+    volume_path = os.path.join('/user-data', username)
+    if not os.path.exists(volume_path):
+        # create a directory with umask 0755 
+        # hub and container user must have the same UID to be writeable
+        # still readable by other users on the system
+        os.mkdir(volume_path, 0o755)
+        os.chown(volume_path, 1000,100)
+        # now do whatever you think your user needs
+        # ...
+        pass
+
+# attach the hook function to the spawner
+c.Spawner.pre_spawn_hook = create_dir_hook
+
+# We rely on environment variables to configure JupyterHub so that we
+# avoid having to rebuild the JupyterHub container every time we change a
+# configuration parameter.
+
+# Spawn single-user servers as Docker containers
+c.JupyterHub.spawner_class = 'dockerspawner.DockerSpawner'
+
+# Spawn containers from this image
+c.DockerSpawner.image = os.environ['JUPYTERHUB_LOCAL_NOTEBOOK_IMAGE']
+
+# JupyterHub requires a single-user instance of the Notebook server, so we
+# default to using the `start-singleuser.sh` script included in the
+# jupyter/docker-stacks *-notebook images as the Docker run command when
+# spawning containers.  Optionally, you can override the Docker run command
+# using the DOCKER_SPAWN_CMD environment variable.
+spawn_cmd = os.environ.get('JUPYTERHUB_DOCKER_SPAWN_CMD', "start-singleuser.sh")
+c.DockerSpawner.extra_create_kwargs.update({ 'command': spawn_cmd })
+
+# Connect containers to this Docker network
+network_name = os.environ.get('JUPYTERHUB_NETWORK_NAME','laradock_backend')
+c.DockerSpawner.use_internal_ip = True
+c.DockerSpawner.network_name = network_name
+
+# Pass the network name as argument to spawned containers
+c.DockerSpawner.extra_host_config = { 'network_mode': network_name, 'runtime': 'nvidia' }
+# c.DockerSpawner.extra_host_config = { 'network_mode': network_name, "devices":["/dev/nvidiactl","/dev/nvidia-uvm","/dev/nvidia0"] }
+# Explicitly set notebook directory because we'll be mounting a host volume to
+# it.  Most jupyter/docker-stacks *-notebook images run the Notebook server as
+# user `jovyan`, and set the notebook directory to `/home/jovyan/work`.
+# We follow the same convention.
+# notebook_dir = os.environ.get('JUPYTERHUB_DOCKER_NOTEBOOK_DIR') or '/home/jovyan/work'
+notebook_dir = '/notebooks'
+c.DockerSpawner.notebook_dir = notebook_dir
+
+# Mount the real user's Docker volume on the host to the notebook user's
+# notebook directory in the container
+user_data = os.environ.get('JUPYTERHUB_USER_DATA','/jupyterhub')
+c.DockerSpawner.volumes = {
+    user_data+'/{username}': notebook_dir
+}
+
+c.DockerSpawner.extra_create_kwargs.update({ 'user': 'root'})
+
+# volume_driver is no longer a keyword argument to create_container()
+# c.DockerSpawner.extra_create_kwargs.update({ 'volume_driver': 'local' })
+# Remove containers once they are stopped
+c.DockerSpawner.remove_containers = True
+
+# For debugging arguments passed to spawned containers
+c.DockerSpawner.debug = True
+
+# User containers will access hub by container name on the Docker network
+c.JupyterHub.hub_ip = 'jupyterhub'
+c.JupyterHub.hub_port = 8000
+
+# TLS config
+c.JupyterHub.port = 80
+# c.JupyterHub.ssl_key = os.environ['SSL_KEY']
+# c.JupyterHub.ssl_cert = os.environ['SSL_CERT']
+
+# Authenticate users with GitHub OAuth
+c.JupyterHub.authenticator_class = 'oauthenticator.GitHubOAuthenticator'
+c.GitHubOAuthenticator.oauth_callback_url = os.environ['JUPYTERHUB_OAUTH_CALLBACK_URL']
+c.GitHubOAuthenticator.client_id = os.environ['JUPYTERHUB_OAUTH_CLIENT_ID']
+c.GitHubOAuthenticator.client_secret = os.environ['JUPYTERHUB_OAUTH_CLIENT_SECRET']
+
+# Persist hub data on volume mounted inside container
+data_dir = '/data'
+
+c.JupyterHub.cookie_secret_file = os.path.join(data_dir,
+    'jupyterhub_cookie_secret')
+
+print(os.environ)
+
+c.JupyterHub.db_url = 'postgresql://{user}:{password}@{host}/{db}'.format(
+    user=os.environ['JUPYTERHUB_POSTGRES_USER'],
+    host=os.environ['JUPYTERHUB_POSTGRES_HOST'],
+    password=os.environ['JUPYTERHUB_POSTGRES_PASSWORD'],
+    db=os.environ['JUPYTERHUB_POSTGRES_DB'],
+)
+
+# Whitlelist users and admins
+c.Authenticator.whitelist = whitelist = set()
+c.Authenticator.admin_users = admin = set()
+c.JupyterHub.admin_access = True
+pwd = os.path.dirname(__file__)
+with open(os.path.join(pwd, 'userlist')) as f:
+    for line in f:
+        if not line:
+            continue
+        parts = line.split()
+        name = parts[0]
+        print(name)
+        whitelist.add(name)
+        if len(parts) > 1 and parts[1] == 'admin':
+            admin.add(name)
+admin.add('laradock')

jupyterhub/start-notebook.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+# Copyright (c) Jupyter Development Team.
+# Distributed under the terms of the Modified BSD License.
+
+set -e
+
+if [[ ! -z "${JUPYTERHUB_API_TOKEN}" ]]; then
+  # launched by JupyterHub, use single-user entrypoint
+  exec /usr/local/bin/start-singleuser.sh $*
+else
+  . /usr/local/bin/start.sh jupyter notebook $*
+fi

jupyterhub/start-singleuser.sh

@@ -0,0 +1,40 @@
+#!/bin/bash
+# Copyright (c) Jupyter Development Team.
+# Distributed under the terms of the Modified BSD License.
+
+set -e
+
+# set default ip to 0.0.0.0
+if [[ "$NOTEBOOK_ARGS $@" != *"--ip="* ]]; then
+  NOTEBOOK_ARGS="--ip=0.0.0.0 $NOTEBOOK_ARGS"
+fi
+
+# handle some deprecated environment variables
+# from DockerSpawner < 0.8.
+# These won't be passed from DockerSpawner 0.9,
+# so avoid specifying --arg=empty-string
+# if [ ! -z "$NOTEBOOK_DIR" ]; then
+  # NOTEBOOK_ARGS="--notebook-dir='$NOTEBOOK_DIR' $NOTEBOOK_ARGS"
+# fi
+if [ ! -z "$JPY_PORT" ]; then
+  NOTEBOOK_ARGS="--port=$JPY_PORT $NOTEBOOK_ARGS"
+fi
+if [ ! -z "$JPY_USER" ]; then
+  NOTEBOOK_ARGS="--user=$JPY_USER $NOTEBOOK_ARGS"
+fi
+if [ ! -z "$JPY_COOKIE_NAME" ]; then
+  NOTEBOOK_ARGS="--cookie-name=$JPY_COOKIE_NAME $NOTEBOOK_ARGS"
+fi
+if [ ! -z "$JPY_BASE_URL" ]; then
+  NOTEBOOK_ARGS="--base-url=$JPY_BASE_URL $NOTEBOOK_ARGS"
+fi
+if [ ! -z "$JPY_HUB_PREFIX" ]; then
+  NOTEBOOK_ARGS="--hub-prefix=$JPY_HUB_PREFIX $NOTEBOOK_ARGS"
+fi
+if [ ! -z "$JPY_HUB_API_URL" ]; then
+  NOTEBOOK_ARGS="--hub-api-url=$JPY_HUB_API_URL $NOTEBOOK_ARGS"
+fi
+
+NOTEBOOK_ARGS=" --allow-root --notebook-dir='/notebooks' $NOTEBOOK_ARGS"
+
+. /usr/local/bin/start.sh jupyterhub-singleuser $NOTEBOOK_ARGS $@

jupyterhub/start.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+# Copyright (c) Jupyter Development Team.
+# Distributed under the terms of the Modified BSD License.
+
+set -e
+
+exec sh -c "env PATH=$PATH $*"

jupyterhub/userlist

@@ -0,0 +1 @@
+laradock

kibana/Dockerfile

@@ -1,3 +1,3 @@
-FROM kibana:latest
+FROM docker.elastic.co/kibana/kibana:6.2.3
 
-EXPOSE 5601
+EXPOSE 5601

laravel-echo-server/Dockerfile

@@ -1,15 +1,22 @@
-FROM node:argon
- 
+FROM node:alpine
+
 # Create app directory
 RUN mkdir -p /usr/src/app
 WORKDIR /usr/src/app
- 
+
 # Install app dependencies
 COPY package.json /usr/src/app/
+
+RUN apk add --update \
+    python \
+    python-dev \
+    py-pip \
+    build-base
+
 RUN npm install
- 
+
 # Bundle app source
 COPY laravel-echo-server.json /usr/src/app/laravel-echo-server.json
- 
+
 EXPOSE 3000
-CMD [ "npm", "start" ]
+CMD [ "npm", "start" ]

maildev/Dockerfile

@@ -0,0 +1,5 @@
+FROM djfarrelly/maildev
+
+LABEL maintainer="Maxime Hélias <maximehelias16@gmail.com>"
+
+EXPOSE 80 25

mailhog/Dockerfile

@@ -1,6 +1,6 @@
 FROM mailhog/mailhog
 
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
 
 CMD ["Mailhog"]
 

mariadb/Dockerfile

@@ -1,8 +1,8 @@
 FROM mariadb:latest
 
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
 
-ADD my.cnf /etc/mysql/conf.d/my.cnf
+COPY my.cnf /etc/mysql/conf.d/my.cnf
 
 CMD ["mysqld"]
 

mariadb/docker-entrypoint-initdb.d/createdb.sql.example

@@ -8,9 +8,9 @@
 #    GRANT ALL ON `myshop_db`.* TO 'appuser'@'%' ;
 #
 ###
-### this sql script is auto run when mariadb container start and $DATA_SAVE_PATH/mariadb not exists.
+### this sql script is auto run when mariadb container start and $DATA_PATH_HOST/mariadb not exists.
 ###
-### if your $DATA_SAVE_PATH/mariadb is exists and you do not want to delete it, you can run by manual execution:
+### if your $DATA_PATH_HOST/mariadb is exists and you do not want to delete it, you can run by manual execution:
 ###
 ###     docker-compose exec mariadb bash
 ###     mysql -u root -p < /docker-entrypoint-initdb.d/createdb.sql

memcached/Dockerfile

@@ -1,6 +1,6 @@
 FROM memcached:latest
 
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
 
 CMD ["memcached"]
 

minio/Dockerfile

@@ -1,5 +1,5 @@
 FROM minio/minio
 
-MAINTAINER Thor Erik Lie <thor@thorerik.com>
+LABEL maintainer="Thor Erik Lie <thor@thorerik.com>"
 
 ENTRYPOINT ["minio", "server", "/export"]

mongo-webui/Dockerfile

@@ -0,0 +1,3 @@
+FROM mongoclient/mongoclient
+
+LABEL maintainer="ahkui <ahkui@outlook.com>"

mongo/Dockerfile

@@ -1,6 +1,6 @@
 FROM mongo:latest
 
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
 
 #COPY mongo.conf /usr/local/etc/mongo/mongo.conf
 

mssql/Dockerfile

@@ -1,6 +1,6 @@
 FROM microsoft/mssql-server-linux
 
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
 
 # Create config directory
 # an set it as WORKDIR

mysql/Dockerfile

@@ -1,10 +1,17 @@
-FROM mysql:5.7
+ARG MYSQL_VERSION=latest
+FROM mysql:${MYSQL_VERSION}
 
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
 
-RUN chown -R mysql:root /var/lib/mysql/
+#####################################
+# Set Timezone
+#####################################
 
-ADD my.cnf /etc/mysql/conf.d/my.cnf
+ARG TZ=UTC
+ENV TZ ${TZ}
+RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone && chown -R mysql:root /var/lib/mysql/
+
+COPY my.cnf /etc/mysql/conf.d/my.cnf
 
 CMD ["mysqld"]
 

mysql/docker-entrypoint-initdb.d/createdb.sql.example

@@ -1,20 +1,20 @@
-###
-### Copy createdb.sql.example to createdb.sql
-### then uncomment then set database name and username to create you need databases
 #
-# example: .env MYSQL_USER=appuser and need db name is myshop_db
+# Copy createdb.sql.example to createdb.sql
+# then uncomment then set database name and username to create you need databases
+#
+# example: .env MYSQL_USER=appuser and needed db name is myshop_db
 #
 #    CREATE DATABASE IF NOT EXISTS `myshop_db` ;
 #    GRANT ALL ON `myshop_db`.* TO 'appuser'@'%' ;
 #
-###
-### this sql script is auto run when mysql container start and $DATA_SAVE_PATH/mysql not exists.
-###
-### if your $DATA_SAVE_PATH/mysql is exists and you do not want to delete it, you can run by manual execution:
-###
-###     docker-compose exec mysql bash
-###     mysql -u root -p < /docker-entrypoint-initdb.d/createdb.sql
-###
+#
+# this sql script will auto run when the mysql container starts and the $DATA_PATH_HOST/mysql not found.
+#
+# if your $DATA_PATH_HOST/mysql exists and you do not want to delete it, you can run by manual execution:
+#
+#     docker-compose exec mysql bash
+#     mysql -u root -p < /docker-entrypoint-initdb.d/createdb.sql
+#
 
 #CREATE DATABASE IF NOT EXISTS `dev_db_1` COLLATE 'utf8_general_ci' ;
 #GRANT ALL ON `dev_db_1`.* TO 'default'@'%' ;

mysql/my.cnf

@@ -6,4 +6,5 @@
 [mysql]
 
 [mysqld]
-sql-mode="STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
+sql-mode="STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_ENGINE_SUBSTITUTION"
+character-set-server=utf8

neo4j/Dockerfile

@@ -1,6 +1,6 @@
 FROM tpires/neo4j
 
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
 
 VOLUME /var/lib/neo4j/data
 

nginx/Dockerfile

@@ -1,20 +1,28 @@
 FROM nginx:alpine
 
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
 
-ADD nginx.conf /etc/nginx/
+COPY nginx.conf /etc/nginx/
 
-ARG PHP_UPSTREAM=php-fpm
+# If you're in China, or you need to change sources, will be set CHANGE_SOURCE to true in .env.
 
-# fix a problem--#397, change application source from dl-cdn.alpinelinux.org to aliyun source.
-RUN sed -i 's/dl-cdn.alpinelinux.org/mirrors.aliyun.com/' /etc/apk/repositories
+ARG CHANGE_SOURCE=false
+RUN if [ ${CHANGE_SOURCE} = true ]; then \
+    # Change application source from dl-cdn.alpinelinux.org to aliyun source
+    sed -i 's/dl-cdn.alpinelinux.org/mirrors.aliyun.com/' /etc/apk/repositories \
+;fi
 
 RUN apk update \
     && apk upgrade \
     && apk add --no-cache bash \
-    && adduser -D -H -u 1000 -s /bin/bash www-data \
-    && rm /etc/nginx/conf.d/default.conf \
-    && echo "upstream php-upstream { server ${PHP_UPSTREAM}:9000; }" > /etc/nginx/conf.d/upstream.conf
+    && adduser -D -H -u 1000 -s /bin/bash www-data
+
+ARG PHP_UPSTREAM_CONTAINER=php-fpm
+ARG PHP_UPSTREAM_PORT=9000
+
+# Set upstream conf and remove the default conf
+RUN echo "upstream php-upstream { server ${PHP_UPSTREAM_CONTAINER}:${PHP_UPSTREAM_PORT}; }" > /etc/nginx/conf.d/upstream.conf \
+    && rm /etc/nginx/conf.d/default.conf
 
 CMD ["nginx"]
 

nginx/nginx.conf

@@ -28,7 +28,7 @@ http {
   ssl_ciphers 'ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS';
   
   include /etc/nginx/conf.d/*.conf;
-  include /etc/nginx/sites-available/*;
+  include /etc/nginx/sites-available/*.conf;
   open_file_cache off; # Disabled for issue 619
   charset UTF-8;
 }

nginx/sites/app.conf.example

@@ -3,8 +3,8 @@ server {
     listen 80;
     listen [::]:80;
 
-    server_name project-1.dev;
-    root /var/www/project-1/public;
+    server_name app.test;
+    root /var/www/app;
     index index.php index.html index.htm;
 
     location / {
@@ -18,6 +18,8 @@ server {
         fastcgi_buffers 16 16k;
         fastcgi_buffer_size 32k;
         fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
+        #fixes timeouts
+        fastcgi_read_timeout 600;
         include fastcgi_params;
     }
 
@@ -29,4 +31,7 @@ server {
         root /var/www/letsencrypt/;
         log_not_found off;
     }
+
+    error_log /var/log/nginx/app_error.log;
+    access_log /var/log/nginx/app_access.log;
 }

nginx/sites/default.conf

@@ -18,6 +18,8 @@ server {
         fastcgi_buffers 16 16k;
         fastcgi_buffer_size 32k;
         fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
+        #fixes timeouts
+        fastcgi_read_timeout 600;
         include fastcgi_params;
     }
 

nginx/sites/laravel.conf.example

@@ -3,8 +3,8 @@ server {
     listen 80;
     listen [::]:80;
 
-    server_name project-2.dev;
-    root /var/www/project-2/public;
+    server_name laravel.test;
+    root /var/www/laravel/public;
     index index.php index.html index.htm;
 
     location / {
@@ -18,6 +18,8 @@ server {
         fastcgi_buffers 16 16k;
         fastcgi_buffer_size 32k;
         fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
+        #fixes timeouts
+        fastcgi_read_timeout 600;
         include fastcgi_params;
     }
 
@@ -29,4 +31,7 @@ server {
         root /var/www/letsencrypt/;
         log_not_found off;
     }
+
+    error_log /var/log/nginx/laravel_error.log;
+    access_log /var/log/nginx/laravel_access.log;
 }

nginx/sites/symfony.conf.example

@@ -0,0 +1,36 @@
+server {
+
+    listen 80;
+    listen [::]:80;
+
+    server_name symfony.test;
+    root /var/www/projects/symfony/web;
+    index index.php index.html index.htm;
+
+    location / {
+      try_files $uri @rewriteapp;
+    }
+
+    # For Symfony 3
+    location @rewriteapp {
+        rewrite ^(.*)$ /app.php/$1 last;
+    }
+    
+    # For Symfony 4 config
+    # location @rewriteapp {
+    #     rewrite ^(.*)$ /index.php/$1 last;
+    # }
+
+    location ~ ^/(app|app_dev|config|index)\.php(/|$) {
+        fastcgi_pass php-upstream;
+        fastcgi_split_path_info ^(.+\.php)(/.*)$;
+        include fastcgi_params;
+        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
+        #fixes timeouts
+        fastcgi_read_timeout 600;
+        fastcgi_param HTTPS off;
+    }
+
+    error_log /var/log/nginx/symfony_error.log;
+    access_log /var/log/nginx/symfony_access.log;
+}

percona/Dockerfile

@@ -1,10 +1,10 @@
 FROM percona:5.7
 
-MAINTAINER DTUNES <diegotdai@gmai.com>
+LABEL maintainer="DTUNES <diegotdai@gmai.com>"
 
 RUN chown -R mysql:root /var/lib/mysql/
 
-ADD my.cnf /etc/mysql/conf.d/my.cnf
+COPY my.cnf /etc/mysql/conf.d/my.cnf
 
 CMD ["mysqld"]
 

percona/docker-entrypoint-initdb.d/createdb.sql.example

@@ -8,9 +8,9 @@
 #    GRANT ALL ON `myshop_db`.* TO 'appuser'@'%' ;
 #
 ###
-### this sql script is auto run when percona container start and $DATA_SAVE_PATH/percona not exists.
+### this sql script is auto run when percona container start and $DATA_PATH_HOST/percona not exists.
 ###
-### if your $DATA_SAVE_PATH/percona is exists and you do not want to delete it, you can run by manual execution:
+### if your $DATA_PATH_HOST/percona is exists and you do not want to delete it, you can run by manual execution:
 ###
 ###     docker-compose exec percona bash
 ###     mysql -u root -p < /docker-entrypoint-initdb.d/createdb.sql

pgadmin/Dockerfile

@@ -1,5 +1,10 @@
 FROM fenglc/pgadmin4
 
-MAINTAINER Bo-Yi Wu <appleboy.tw@gmail.com>
+LABEL maintainer="Huadong Zuo <admin@zuohuadong.cn>"
+
+# user: pgadmin4@pgadmin.org
+# password: admin
+# pg_dump & postgresql all in  "/usr/bin"
+# backup in "/var/lib/pgadmin/storage/pgadmin4"
 
 EXPOSE 5050

php-fpm/Dockerfile

@@ -0,0 +1,566 @@
+#
+#--------------------------------------------------------------------------
+# Image Setup
+#--------------------------------------------------------------------------
+#
+# To edit the 'php-fpm' base Image, visit its repository on Github
+#    https://github.com/Laradock/php-fpm
+#
+# To change its version, see the available Tags on the Docker Hub:
+#    https://hub.docker.com/r/laradock/php-fpm/tags/
+#
+# Note: Base Image name format {image-tag}-{php-version}
+#
+
+ARG LARADOCK_PHP_VERSION
+
+FROM laradock/php-fpm:2.2-${LARADOCK_PHP_VERSION}
+
+LABEL maintainer="Mahmoud Zalt <mahmoud@zalt.me>"
+
+ARG LARADOCK_PHP_VERSION
+
+# Set Environment Variables
+ENV DEBIAN_FRONTEND noninteractive
+
+# always run apt update when start and after add new source list, then clean up at end.
+RUN apt-get update -yqq && \
+    apt-get install -y apt-utils && \
+    pecl channel-update pecl.php.net
+
+#
+#--------------------------------------------------------------------------
+# Mandatory Software's Installation
+#--------------------------------------------------------------------------
+#
+# Mandatory Software's such as ("mcrypt", "pdo_mysql", "libssl-dev", ....)
+# are installed on the base image 'laradock/php-fpm' image. If you want
+# to add more Software's or remove existing one, you need to edit the
+# base image (https://github.com/Laradock/php-fpm).
+#
+
+#
+#--------------------------------------------------------------------------
+# Optional Software's Installation
+#--------------------------------------------------------------------------
+#
+# Optional Software's will only be installed if you set them to `true`
+# in the `docker-compose.yml` before the build.
+# Example:
+#   - INSTALL_ZIP_ARCHIVE=true
+#
+
+###########################################################################
+# SSH2:
+###########################################################################
+
+ARG INSTALL_SSH2=false
+
+RUN if [ ${INSTALL_SSH2} = true ]; then \
+    # Install the ssh2 extension
+    apt-get -y install libssh2-1-dev && \
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+        pecl install -a ssh2-0.13; \
+    else \
+        pecl install -a ssh2-1.1.2; \
+    fi && \
+    docker-php-ext-enable ssh2 \
+;fi
+
+###########################################################################
+# SOAP:
+###########################################################################
+
+ARG INSTALL_SOAP=false
+
+RUN if [ ${INSTALL_SOAP} = true ]; then \
+    # Install the soap extension
+    rm /etc/apt/preferences.d/no-debian-php && \
+    apt-get -y install libxml2-dev php-soap && \
+    docker-php-ext-install soap \
+;fi
+
+###########################################################################
+# pgsql
+###########################################################################
+
+ARG INSTALL_PGSQL=false
+
+RUN if [ ${INSTALL_PGSQL} = true ]; then \
+    # Install the pgsql extension
+    docker-php-ext-install pgsql \
+;fi
+
+###########################################################################
+# pgsql client
+###########################################################################
+
+ARG INSTALL_PG_CLIENT=false
+
+RUN if [ ${INSTALL_PG_CLIENT} = true ]; then \
+    # Create folders if not exists (https://github.com/tianon/docker-brew-debian/issues/65)
+    mkdir -p /usr/share/man/man1 && \
+    mkdir -p /usr/share/man/man7 && \
+    # Install the pgsql client
+    apt-get install -y postgresql-client \
+;fi
+
+###########################################################################
+# xDebug:
+###########################################################################
+
+ARG INSTALL_XDEBUG=false
+
+RUN if [ ${INSTALL_XDEBUG} = true ]; then \
+  # Install the xdebug extension
+  if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+    pecl install xdebug-2.5.5; \
+  else \
+    pecl install xdebug; \
+  fi && \
+  docker-php-ext-enable xdebug \
+;fi
+
+# Copy xdebug configuration for remote debugging
+COPY ./xdebug.ini /usr/local/etc/php/conf.d/xdebug.ini
+
+RUN sed -i "s/xdebug.remote_autostart=0/xdebug.remote_autostart=1/" /usr/local/etc/php/conf.d/xdebug.ini && \
+    sed -i "s/xdebug.remote_enable=0/xdebug.remote_enable=1/" /usr/local/etc/php/conf.d/xdebug.ini && \
+    sed -i "s/xdebug.cli_color=0/xdebug.cli_color=1/" /usr/local/etc/php/conf.d/xdebug.ini
+
+###########################################################################
+# Phpdbg:
+###########################################################################
+
+ARG INSTALL_PHPDBG=false
+
+RUN if [ ${INSTALL_PHPDBG} = true ]; then \
+    # Load the xdebug extension only with phpunit commands
+    apt-get install -y --force-yes php${LARADOCK_PHP_VERSION}-phpdbg \
+;fi
+
+###########################################################################
+# Blackfire:
+###########################################################################
+
+ARG INSTALL_BLACKFIRE=false
+
+RUN if [ ${INSTALL_XDEBUG} = false -a ${INSTALL_BLACKFIRE} = true ]; then \
+    version=$(php -r "echo PHP_MAJOR_VERSION.PHP_MINOR_VERSION;") \
+    && curl -A "Docker" -o /tmp/blackfire-probe.tar.gz -D - -L -s https://blackfire.io/api/v1/releases/probe/php/linux/amd64/$version \
+    && tar zxpf /tmp/blackfire-probe.tar.gz -C /tmp \
+    && mv /tmp/blackfire-*.so $(php -r "echo ini_get('extension_dir');")/blackfire.so \
+    && printf "extension=blackfire.so\nblackfire.agent_socket=tcp://blackfire:8707\n" > $PHP_INI_DIR/conf.d/blackfire.ini \
+;fi
+
+###########################################################################
+# PHP REDIS EXTENSION
+###########################################################################
+
+ARG INSTALL_PHPREDIS=false
+
+RUN if [ ${INSTALL_PHPREDIS} = true ]; then \
+    # Install Php Redis Extension
+    printf "\n" | pecl install -o -f redis \
+    &&  rm -rf /tmp/pear \
+    &&  docker-php-ext-enable redis \
+;fi
+
+###########################################################################
+# Swoole EXTENSION
+###########################################################################
+
+ARG INSTALL_SWOOLE=false
+
+RUN if [ ${INSTALL_SWOOLE} = true ]; then \
+    # Install Php Swoole Extension
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      pecl install swoole-2.0.11; \
+    else \
+      if [ $(php -r "echo PHP_MINOR_VERSION;") = "0" ]; then \
+        pecl install swoole-2.2.0; \
+      else \
+        pecl install swoole; \
+      fi \
+    fi && \
+    docker-php-ext-enable swoole \
+;fi
+
+###########################################################################
+# MongoDB:
+###########################################################################
+
+ARG INSTALL_MONGO=false
+
+RUN if [ ${INSTALL_MONGO} = true ]; then \
+    # Install the mongodb extension
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      pecl install mongo && \
+      docker-php-ext-enable mongo \
+    ;fi && \
+    pecl install mongodb && \
+    docker-php-ext-enable mongodb \
+;fi
+
+###########################################################################
+# AMQP:
+###########################################################################
+
+ARG INSTALL_AMQP=false
+
+RUN if [ ${INSTALL_AMQP} = true ]; then \
+    apt-get install librabbitmq-dev -y && \
+    # Install the amqp extension
+    pecl install amqp && \
+    docker-php-ext-enable amqp \
+;fi
+
+###########################################################################
+# ZipArchive:
+###########################################################################
+
+ARG INSTALL_ZIP_ARCHIVE=false
+
+RUN if [ ${INSTALL_ZIP_ARCHIVE} = true ]; then \
+    apt-get install libzip-dev -y && \
+    docker-php-ext-configure zip --with-libzip && \
+    # Install the zip extension
+    docker-php-ext-install zip \
+;fi
+
+###########################################################################
+# pcntl
+###########################################################################
+
+ARG INSTALL_PCNTL=false
+RUN if [ ${INSTALL_PCNTL} = true ]; then \
+    # Installs pcntl, helpful for running Horizon
+    docker-php-ext-install pcntl \
+;fi
+
+###########################################################################
+# bcmath:
+###########################################################################
+
+ARG INSTALL_BCMATH=false
+
+RUN if [ ${INSTALL_BCMATH} = true ]; then \
+    # Install the bcmath extension
+    docker-php-ext-install bcmath \
+;fi
+
+###########################################################################
+# GMP (GNU Multiple Precision):
+###########################################################################
+
+ARG INSTALL_GMP=false
+
+RUN if [ ${INSTALL_GMP} = true ]; then \
+    # Install the GMP extension
+	  apt-get install -y libgmp-dev && \
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      ln -s /usr/include/x86_64-linux-gnu/gmp.h /usr/include/gmp.h \
+    ;fi && \
+    docker-php-ext-install gmp \
+;fi
+
+###########################################################################
+# PHP Memcached:
+###########################################################################
+
+ARG INSTALL_MEMCACHED=false
+
+RUN if [ ${INSTALL_MEMCACHED} = true ]; then \
+    # Install the php memcached extension
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      curl -L -o /tmp/memcached.tar.gz "https://github.com/php-memcached-dev/php-memcached/archive/2.2.0.tar.gz"; \
+    else \
+      curl -L -o /tmp/memcached.tar.gz "https://github.com/php-memcached-dev/php-memcached/archive/php7.tar.gz"; \
+    fi \
+    && mkdir -p memcached \
+    && tar -C memcached -zxvf /tmp/memcached.tar.gz --strip 1 \
+    && ( \
+        cd memcached \
+        && phpize \
+        && ./configure \
+        && make -j$(nproc) \
+        && make install \
+    ) \
+    && rm -r memcached \
+    && rm /tmp/memcached.tar.gz \
+    && docker-php-ext-enable memcached \
+;fi
+
+###########################################################################
+# Exif:
+###########################################################################
+
+ARG INSTALL_EXIF=false
+
+RUN if [ ${INSTALL_EXIF} = true ]; then \
+    # Enable Exif PHP extentions requirements
+    docker-php-ext-install exif \
+;fi
+
+###########################################################################
+# PHP Aerospike:
+###########################################################################
+
+USER root
+
+ARG INSTALL_AEROSPIKE=false
+ARG AEROSPIKE_PHP_REPOSITORY
+
+RUN if [ ${INSTALL_AEROSPIKE} = true ]; then \
+    # Fix dependencies for PHPUnit within aerospike extension
+    apt-get -y install sudo wget && \
+    # Install the php aerospike extension
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      curl -L -o /tmp/aerospike-client-php.tar.gz https://github.com/aerospike/aerospike-client-php5/archive/master.tar.gz; \
+    else \
+      curl -L -o /tmp/aerospike-client-php.tar.gz ${AEROSPIKE_PHP_REPOSITORY}; \
+    fi \
+    && mkdir -p aerospike-client-php \
+    && tar -C aerospike-client-php -zxvf /tmp/aerospike-client-php.tar.gz --strip 1 \
+    && \
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      ( \
+          cd aerospike-client-php/src/aerospike \
+          && phpize \
+          && ./build.sh \
+          && make install \
+      ) \
+    else \
+      ( \
+          cd aerospike-client-php/src \
+          && phpize \
+          && ./build.sh \
+          && make install \
+      ) \
+    fi \
+    && rm /tmp/aerospike-client-php.tar.gz \
+    && docker-php-ext-enable aerospike \
+;fi
+
+###########################################################################
+# IonCube Loader:
+###########################################################################
+
+ARG INSTALL_IONCUBE=false
+
+RUN if [ ${INSTALL_IONCUBE} = true ]; then \
+    # Install the php ioncube loader
+    curl -L -o /tmp/ioncube_loaders_lin_x86-64.tar.gz https://downloads.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz \
+    && tar zxpf /tmp/ioncube_loaders_lin_x86-64.tar.gz -C /tmp \
+    && mv /tmp/ioncube/ioncube_loader_lin_${LARADOCK_PHP_VERSION}.so $(php -r "echo ini_get('extension_dir');")/ioncube_loader.so \
+    && printf "zend_extension=ioncube_loader.so\n" > $PHP_INI_DIR/conf.d/0ioncube.ini \
+    && rm -rf /tmp/ioncube* \
+;fi
+
+###########################################################################
+# Opcache:
+###########################################################################
+
+ARG INSTALL_OPCACHE=false
+
+RUN if [ ${INSTALL_OPCACHE} = true ]; then \
+    docker-php-ext-install opcache \
+;fi
+
+# Copy opcache configration
+COPY ./opcache.ini /usr/local/etc/php/conf.d/opcache.ini
+
+###########################################################################
+# Mysqli Modifications:
+###########################################################################
+
+ARG INSTALL_MYSQLI=false
+
+RUN if [ ${INSTALL_MYSQLI} = true ]; then \
+    docker-php-ext-install mysqli \
+;fi
+
+###########################################################################
+# Tokenizer Modifications:
+###########################################################################
+
+ARG INSTALL_TOKENIZER=false
+
+RUN if [ ${INSTALL_TOKENIZER} = true ]; then \
+    docker-php-ext-install tokenizer \
+;fi
+
+###########################################################################
+# Human Language and Character Encoding Support:
+###########################################################################
+
+ARG INSTALL_INTL=false
+
+RUN if [ ${INSTALL_INTL} = true ]; then \
+    # Install intl and requirements
+    apt-get install -y zlib1g-dev libicu-dev g++ && \
+    docker-php-ext-configure intl && \
+    docker-php-ext-install intl \
+;fi
+
+###########################################################################
+# GHOSTSCRIPT:
+###########################################################################
+
+ARG INSTALL_GHOSTSCRIPT=false
+
+RUN if [ ${INSTALL_GHOSTSCRIPT} = true ]; then \
+    # Install the ghostscript extension
+    # for PDF editing
+    apt-get install -y \
+    poppler-utils \
+    ghostscript \
+;fi
+
+###########################################################################
+# LDAP:
+###########################################################################
+
+ARG INSTALL_LDAP=false
+
+RUN if [ ${INSTALL_LDAP} = true ]; then \
+    apt-get install -y libldap2-dev && \
+    docker-php-ext-configure ldap --with-libdir=lib/x86_64-linux-gnu/ && \
+    docker-php-ext-install ldap \
+;fi
+
+###########################################################################
+# SQL SERVER:
+###########################################################################
+
+ARG INSTALL_MSSQL=false
+
+RUN set -eux; if [ ${INSTALL_MSSQL} = true ]; then \
+    if [ $(php -r "echo PHP_MAJOR_VERSION;") = "5" ]; then \
+      apt-get -y install freetds-dev libsybdb5 \
+      && ln -s /usr/lib/x86_64-linux-gnu/libsybdb.so /usr/lib/libsybdb.so \
+      && docker-php-ext-install mssql pdo_dblib \
+      && php -m | grep -q 'mssql' \
+      && php -m | grep -q 'pdo_dblib' \
+    ;else \
+      ###########################################################################
+      # Ref from https://github.com/Microsoft/msphpsql/wiki/Dockerfile-for-adding-pdo_sqlsrv-and-sqlsrv-to-official-php-image
+      ###########################################################################
+      # Add Microsoft repo for Microsoft ODBC Driver 13 for Linux
+      apt-get install -y apt-transport-https gnupg \
+      && curl https://packages.microsoft.com/keys/microsoft.asc | apt-key add - \
+      && curl https://packages.microsoft.com/config/debian/9/prod.list > /etc/apt/sources.list.d/mssql-release.list \
+      && apt-get update -yqq \
+      # Install Dependencies
+      && ACCEPT_EULA=Y apt-get install -y unixodbc unixodbc-dev libgss3 odbcinst msodbcsql17 locales \
+      && echo "en_US.UTF-8 UTF-8" > /etc/locale.gen \
+      # link local aliases
+      && ln -sfn /etc/locale.alias /usr/share/locale/locale.alias \
+      && locale-gen \
+      # Install pdo_sqlsrv and sqlsrv from PECL. Replace pdo_sqlsrv-4.1.8preview with preferred version.
+      && pecl install pdo_sqlsrv sqlsrv \
+      && docker-php-ext-enable pdo_sqlsrv sqlsrv \
+      && php -m | grep -q 'pdo_sqlsrv' \
+      && php -m | grep -q 'sqlsrv' \
+    ;fi \
+;fi
+
+###########################################################################
+# Image optimizers:
+###########################################################################
+
+USER root
+
+ARG INSTALL_IMAGE_OPTIMIZERS=false
+
+RUN if [ ${INSTALL_IMAGE_OPTIMIZERS} = true ]; then \
+    apt-get install -y jpegoptim optipng pngquant gifsicle \
+;fi
+
+###########################################################################
+# ImageMagick:
+###########################################################################
+
+USER root
+
+ARG INSTALL_IMAGEMAGICK=false
+
+RUN if [ ${INSTALL_IMAGEMAGICK} = true ]; then \
+    apt-get install -y libmagickwand-dev imagemagick && \
+    pecl install imagick && \
+    docker-php-ext-enable imagick \
+;fi
+
+###########################################################################
+# IMAP:
+###########################################################################
+
+ARG INSTALL_IMAP=false
+
+RUN if [ ${INSTALL_IMAP} = true ]; then \
+    apt-get install -y libc-client-dev libkrb5-dev && \
+    rm -r /var/lib/apt/lists/* && \
+    docker-php-ext-configure imap --with-kerberos --with-imap-ssl && \
+    docker-php-ext-install imap \
+;fi
+
+###########################################################################
+# Calendar:
+###########################################################################
+
+USER root
+
+ARG INSTALL_CALENDAR=false
+
+RUN if [ ${INSTALL_CALENDAR} = true ]; then \
+    docker-php-ext-configure calendar && \
+    docker-php-ext-install calendar \
+;fi
+
+###########################################################################
+# libfaketime:
+###########################################################################
+
+USER root
+
+ARG INSTALL_FAKETIME=false
+
+RUN if [ ${INSTALL_FAKETIME} = true ]; then \
+    apt-get install -y libfaketime \
+;fi
+
+###########################################################################
+# Check PHP version:
+###########################################################################
+
+RUN php -v | head -n 1 | grep -q "PHP ${LARADOCK_PHP_VERSION}."
+
+#
+#--------------------------------------------------------------------------
+# Final Touch
+#--------------------------------------------------------------------------
+#
+
+COPY ./laravel.ini /usr/local/etc/php/conf.d
+COPY ./xlaravel.pool.conf /usr/local/etc/php-fpm.d/
+
+USER root
+
+# Clean up
+RUN apt-get clean && \
+    rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* && \
+    rm /var/log/lastlog /var/log/faillog
+
+RUN usermod -u 1000 www-data
+
+# Adding the faketime library to the preload file needs to be done last
+# otherwise it will preload it for all commands that follow in this file
+RUN if [ ${INSTALL_FAKETIME} = true ]; then \
+    echo "/usr/lib/x86_64-linux-gnu/faketime/libfaketime.so.1" > /etc/ld.so.preload \
+;fi
+
+WORKDIR /var/www
+
+CMD ["php-fpm"]
+
+EXPOSE 9000

php-fpm/Dockerfile-56

@@ -1,278 +0,0 @@
-#
-#--------------------------------------------------------------------------
-# Image Setup
-#--------------------------------------------------------------------------
-#
-# To edit the 'php-fpm' base Image, visit its repository on Github
-#    https://github.com/Laradock/php-fpm
-#
-# To change its version, see the available Tags on the Docker Hub:
-#    https://hub.docker.com/r/laradock/php-fpm/tags/
-#
-# Note: Base Image name format {image-tag}-{php-version}
-#
-
-FROM laradock/php-fpm:1.4-56
-
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
-
-#
-#--------------------------------------------------------------------------
-# Mandatory Software's Installation
-#--------------------------------------------------------------------------
-#
-# Mandatory Software's such as ("mcrypt", "pdo_mysql", "libssl-dev", ....)
-# are installed on the base image 'laradock/php-fpm' image. If you want
-# to add more Software's or remove existing one, you need to edit the
-# base image (https://github.com/Laradock/php-fpm).
-#
-
-#
-#--------------------------------------------------------------------------
-# Optional Software's Installation
-#--------------------------------------------------------------------------
-#
-# Optional Software's will only be installed if you set them to `true`
-# in the `docker-compose.yml` before the build.
-# Example:
-#   - INSTALL_ZIP_ARCHIVE=true
-#
-
-#####################################
-# SOAP:
-#####################################
-
-ARG INSTALL_SOAP=false
-RUN if [ ${INSTALL_SOAP} = true ]; then \
-    # Install the soap extension
-    apt-get update -yqq && \
-    apt-get -y install libxml2-dev php-soap && \
-    docker-php-ext-install soap \
-;fi
-
-#####################################
-# xDebug:
-#####################################
-
-ARG INSTALL_XDEBUG=false
-RUN if [ ${INSTALL_XDEBUG} = true ]; then \
-    # Install the xdebug extension
-    # pecl install xdebug && docker-php-ext-enable xdebug \
-    # workaround for https://github.com/docker-library/php/issues/133
-    #     - Xdebug breaks on access to class static property
-    apt-get install -y php5-xdebug && \
-	echo "zend_extension=/usr/lib/php5/20131226/xdebug.so" > /usr/local/etc/php/conf.d/docker-php-ext-xdebug.ini \
-;fi
-
-# Copy xdebug configration for remote debugging
-COPY ./xdebug.ini /usr/local/etc/php/conf.d/xdebug.ini
-
-#####################################
-# Blackfire:
-#####################################
-
-ARG INSTALL_BLACKFIRE=false
-RUN if [ ${INSTALL_XDEBUG} = false -a ${INSTALL_BLACKFIRE} = true ]; then \
-    version=$(php -r "echo PHP_MAJOR_VERSION.PHP_MINOR_VERSION;") \
-    && curl -A "Docker" -o /tmp/blackfire-probe.tar.gz -D - -L -s https://blackfire.io/api/v1/releases/probe/php/linux/amd64/$version \
-    && tar zxpf /tmp/blackfire-probe.tar.gz -C /tmp \
-    && mv /tmp/blackfire-*.so $(php -r "echo ini_get('extension_dir');")/blackfire.so \
-    && printf "extension=blackfire.so\nblackfire.agent_socket=tcp://blackfire:8707\n" > $PHP_INI_DIR/conf.d/blackfire.ini \
-;fi
-
-#####################################
-# PHP REDIS EXTENSION FOR PHP 5
-#####################################
-
-ARG INSTALL_PHPREDIS=false
-RUN if [ ${INSTALL_PHPREDIS} = true ]; then \
-    # Install Php Redis Extension
-    pecl install -o -f redis \
-    &&  rm -rf /tmp/pear \
-    &&  docker-php-ext-enable redis \
-;fi
-
-#####################################
-# Swoole EXTENSION FOR PHP 5
-#####################################
-
-ARG INSTALL_SWOOLE=false
-RUN if [ ${INSTALL_SWOOLE} = true ]; then \
-    # Install Php Swoole Extension
-    pecl install swoole \
-    &&  docker-php-ext-enable swoole \
-;fi
-
-#####################################
-# MongoDB:
-#####################################
-
-ARG INSTALL_MONGO=false
-RUN if [ ${INSTALL_MONGO} = true ]; then \
-    # Install the mongodb extension
-    pecl install mongodb && \
-    docker-php-ext-enable mongodb \
-;fi
-
-#####################################
-# ZipArchive:
-#####################################
-
-ARG INSTALL_ZIP_ARCHIVE=false
-RUN if [ ${INSTALL_ZIP_ARCHIVE} = true ]; then \
-    # Install the zip extension
-    docker-php-ext-install zip \
-;fi
-
-#####################################
-# bcmath:
-#####################################
-
-ARG INSTALL_BCMATH=false
-RUN if [ ${INSTALL_BCMATH} = true ]; then \
-    # Install the bcmath extension
-    docker-php-ext-install bcmath \
-;fi
-
-#####################################
-# PHP Memcached:
-#####################################
-
-ARG INSTALL_MEMCACHED=false
-RUN if [ ${INSTALL_MEMCACHED} = true ]; then \
-    # Install the php memcached extension
-    pecl install memcached-2.2.0 && \
-    docker-php-ext-enable memcached \
-;fi
-
-#####################################
-# Exif:
-#####################################
-
-ARG INSTALL_EXIF=false
-RUN if [ ${INSTALL_EXIF} = true ]; then \
-    # Enable Exif PHP extentions requirements
-    docker-php-ext-install exif \
-;fi
-
-#####################################
-# PHP Aerospike:
-#####################################
-
-ARG INSTALL_AEROSPIKE=false
-ENV INSTALL_AEROSPIKE ${INSTALL_AEROSPIKE}
-# Copy aerospike configration for remote debugging
-COPY ./aerospike.ini /usr/local/etc/php/conf.d/aerospike.ini
-RUN if [ ${INSTALL_AEROSPIKE} = true ]; then \
-    # Install the php aerospike extension
-    curl -L -o /tmp/aerospike-client-php.tar.gz "https://github.com/aerospike/aerospike-client-php/archive/3.4.14.tar.gz" \
-    && mkdir -p aerospike-client-php \
-    && tar -C aerospike-client-php -zxvf /tmp/aerospike-client-php.tar.gz --strip 1 \
-    && ( \
-        cd aerospike-client-php/src/aerospike \
-        && phpize \
-        && ./build.sh \
-        && make install \
-    ) \
-    && rm /tmp/aerospike-client-php.tar.gz \
-    && docker-php-ext-enable aerospike \
-;fi
-
-#####################################
-# Opcache:
-#####################################
-
-ARG INSTALL_OPCACHE=false
-RUN if [ ${INSTALL_OPCACHE} = true ]; then \
-    docker-php-ext-install opcache \
-;fi
-
-# Copy opcache configration
-COPY ./opcache.ini /usr/local/etc/php/conf.d/opcache.ini
-
-#####################################
-# Mysqli Modifications:
-#####################################
-
-ARG INSTALL_MYSQLI=false
-# MySQL extenstion is available for Php5.6 and lower only
-COPY ./mysql.ini /usr/local/etc/php/conf.d/mysql.ini
-RUN if [ ${INSTALL_MYSQLI} = true ]; then \
-    docker-php-ext-install mysql && \
-    docker-php-ext-install mysqli \
-;fi
-
-#####################################
-# Tokenizer Modifications:
-#####################################
-
-ARG INSTALL_TOKENIZER=false
-RUN if [ ${INSTALL_TOKENIZER} = true ]; then \
-    docker-php-ext-install tokenizer \
-;fi
-
-#####################################
-# Human Language and Character Encoding Support:
-#####################################
-
-ARG INSTALL_INTL=false
-RUN if [ ${INSTALL_INTL} = true ]; then \
-    # Install intl and requirements
-    apt-get install -y zlib1g-dev libicu-dev g++ && \
-    docker-php-ext-configure intl && \
-    docker-php-ext-install intl \
-;fi
-
-#####################################
-# GHOSTSCRIPT:
-#####################################
-
-ARG INSTALL_GHOSTSCRIPT=false
-RUN if [ ${INSTALL_GHOSTSCRIPT} = true ]; then \
-    # Install the ghostscript extension for PDF editing
-    apt-get update -yqq && \
-    apt-get install -y poppler-utils ghostscript \
-;fi
-
-#####################################
-# LDAP:
-#####################################
-
-ARG INSTALL_LDAP=false
-RUN if [ ${INSTALL_LDAP} = true ]; then \
-    apt-get update -yqq && \
-    apt-get install -y libldap2-dev && \
-    docker-php-ext-configure ldap --with-libdir=lib/x86_64-linux-gnu/ && \
-    docker-php-ext-install ldap \
-;fi
-
-#####################################
-# SQL SERVER:
-#####################################
-ARG INSTALL_MSSQL=false
-ENV INSTALL_MSSQL ${INSTALL_MSSQL}
-
-RUN if [ ${INSTALL_MSSQL} = true ]; then \
-    apt-get -y install php5-sybase freetds-bin && \
-    cp /usr/lib/php5/20131226/*.so /usr/local/lib/php/extensions/no-debug-non-zts-20131226/ && \
-    docker-php-ext-enable mssql pdo pdo_dblib \
-;fi
-
-#
-#--------------------------------------------------------------------------
-# Final Touch
-#--------------------------------------------------------------------------
-#
-
-ADD ./laravel.ini /usr/local/etc/php/conf.d
-ADD ./laravel.pool.conf /usr/local/etc/php-fpm.d/
-
-#RUN rm -r /var/lib/apt/lists/*
-
-RUN usermod -u 1000 www-data
-
-WORKDIR /var/www
-
-CMD ["php-fpm"]
-
-EXPOSE 9000

php-fpm/Dockerfile-70

@@ -1,302 +0,0 @@
-#
-#--------------------------------------------------------------------------
-# Image Setup
-#--------------------------------------------------------------------------
-#
-# To edit the 'php-fpm' base Image, visit its repository on Github
-#    https://github.com/Laradock/php-fpm
-#
-# To change its version, see the available Tags on the Docker Hub:
-#    https://hub.docker.com/r/laradock/php-fpm/tags/
-#
-# Note: Base Image name format {image-tag}-{php-version}
-#
-
-FROM laradock/php-fpm:1.4-70
-
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
-
-#
-#--------------------------------------------------------------------------
-# Mandatory Software's Installation
-#--------------------------------------------------------------------------
-#
-# Mandatory Software's such as ("mcrypt", "pdo_mysql", "libssl-dev", ....)
-# are installed on the base image 'laradock/php-fpm' image. If you want
-# to add more Software's or remove existing one, you need to edit the
-# base image (https://github.com/Laradock/php-fpm).
-#
-
-#
-#--------------------------------------------------------------------------
-# Optional Software's Installation
-#--------------------------------------------------------------------------
-#
-# Optional Software's will only be installed if you set them to `true`
-# in the `docker-compose.yml` before the build.
-# Example:
-#   - INSTALL_ZIP_ARCHIVE=true
-#
-
-#####################################
-# SOAP:
-#####################################
-
-ARG INSTALL_SOAP=false
-RUN if [ ${INSTALL_SOAP} = true ]; then \
-    # Install the soap extension
-    apt-get update -yqq && \
-    apt-get -y install libxml2-dev php-soap && \
-    docker-php-ext-install soap \
-;fi
-
-#####################################
-# xDebug:
-#####################################
-
-ARG INSTALL_XDEBUG=false
-RUN if [ ${INSTALL_XDEBUG} = true ]; then \
-    # Install the xdebug extension
-    pecl install xdebug && \
-    docker-php-ext-enable xdebug \
-;fi
-
-# Copy xdebug configration for remote debugging
-COPY ./xdebug.ini /usr/local/etc/php/conf.d/xdebug.ini
-
-#####################################
-# Blackfire:
-#####################################
-
-ARG INSTALL_BLACKFIRE=false
-RUN if [ ${INSTALL_XDEBUG} = false -a ${INSTALL_BLACKFIRE} = true ]; then \
-    version=$(php -r "echo PHP_MAJOR_VERSION.PHP_MINOR_VERSION;") \
-    && curl -A "Docker" -o /tmp/blackfire-probe.tar.gz -D - -L -s https://blackfire.io/api/v1/releases/probe/php/linux/amd64/$version \
-    && tar zxpf /tmp/blackfire-probe.tar.gz -C /tmp \
-    && mv /tmp/blackfire-*.so $(php -r "echo ini_get('extension_dir');")/blackfire.so \
-    && printf "extension=blackfire.so\nblackfire.agent_socket=tcp://blackfire:8707\n" > $PHP_INI_DIR/conf.d/blackfire.ini \
-;fi
-
-#####################################
-# PHP REDIS EXTENSION FOR PHP 7
-#####################################
-
-ARG INSTALL_PHPREDIS=false
-RUN if [ ${INSTALL_PHPREDIS} = true ]; then \
-    # Install Php Redis Extension
-    pecl install -o -f redis \
-    &&  rm -rf /tmp/pear \
-    &&  docker-php-ext-enable redis \
-;fi
-
-#####################################
-# Swoole EXTENSION FOR PHP 7
-#####################################
-
-ARG INSTALL_SWOOLE=false
-RUN if [ ${INSTALL_SWOOLE} = true ]; then \
-    # Install Php Swoole Extension
-    pecl install swoole \
-    &&  docker-php-ext-enable swoole \
-;fi
-
-#####################################
-# MongoDB:
-#####################################
-
-ARG INSTALL_MONGO=false
-RUN if [ ${INSTALL_MONGO} = true ]; then \
-    # Install the mongodb extension
-    pecl install mongodb && \
-    docker-php-ext-enable mongodb \
-;fi
-
-#####################################
-# ZipArchive:
-#####################################
-
-ARG INSTALL_ZIP_ARCHIVE=false
-RUN if [ ${INSTALL_ZIP_ARCHIVE} = true ]; then \
-    # Install the zip extension
-    docker-php-ext-install zip \
-;fi
-
-#####################################
-# bcmath:
-#####################################
-
-ARG INSTALL_BCMATH=false
-RUN if [ ${INSTALL_BCMATH} = true ]; then \
-    # Install the bcmath extension
-    docker-php-ext-install bcmath \
-;fi
-
-#####################################
-# PHP Memcached:
-#####################################
-
-ARG INSTALL_MEMCACHED=false
-RUN if [ ${INSTALL_MEMCACHED} = true ]; then \
-    # Install the php memcached extension
-    curl -L -o /tmp/memcached.tar.gz "https://github.com/php-memcached-dev/php-memcached/archive/php7.tar.gz" \
-    && mkdir -p memcached \
-    && tar -C memcached -zxvf /tmp/memcached.tar.gz --strip 1 \
-    && ( \
-        cd memcached \
-        && phpize \
-        && ./configure \
-        && make -j$(nproc) \
-        && make install \
-    ) \
-    && rm -r memcached \
-    && rm /tmp/memcached.tar.gz \
-    && docker-php-ext-enable memcached \
-;fi
-
-#####################################
-# Exif:
-#####################################
-
-ARG INSTALL_EXIF=false
-RUN if [ ${INSTALL_EXIF} = true ]; then \
-    # Enable Exif PHP extentions requirements
-    docker-php-ext-install exif \
-;fi
-
-#####################################
-# PHP Aerospike:
-#####################################
-
-ARG INSTALL_AEROSPIKE=false
-ENV INSTALL_AEROSPIKE ${INSTALL_AEROSPIKE}
-# Copy aerospike configration for remote debugging
-COPY ./aerospike.ini /usr/local/etc/php/conf.d/aerospike.ini
-RUN if [ ${INSTALL_AEROSPIKE} = true ]; then \
-    # Install the php aerospike extension
-    curl -L -o /tmp/aerospike-client-php.tar.gz "https://github.com/aerospike/aerospike-client-php/archive/3.4.14.tar.gz" \
-    && mkdir -p aerospike-client-php \
-    && tar -C aerospike-client-php -zxvf /tmp/aerospike-client-php.tar.gz --strip 1 \
-    && ( \
-        cd aerospike-client-php/src/aerospike \
-        && phpize \
-        && ./build.sh \
-        && make install \
-    ) \
-    && rm /tmp/aerospike-client-php.tar.gz \
-    && docker-php-ext-enable aerospike \
-;fi
-
-#####################################
-# Opcache:
-#####################################
-
-ARG INSTALL_OPCACHE=false
-RUN if [ ${INSTALL_OPCACHE} = true ]; then \
-    docker-php-ext-install opcache \
-;fi
-
-# Copy opcache configration
-COPY ./opcache.ini /usr/local/etc/php/conf.d/opcache.ini
-
-#####################################
-# Mysqli Modifications:
-#####################################
-
-ARG INSTALL_MYSQLI=false
-RUN if [ ${INSTALL_MYSQLI} = true ]; then \
-    docker-php-ext-install mysqli \
-;fi
-
-#####################################
-# Tokenizer Modifications:
-#####################################
-
-ARG INSTALL_TOKENIZER=false
-RUN if [ ${INSTALL_TOKENIZER} = true ]; then \
-    docker-php-ext-install tokenizer \
-;fi
-
-#####################################
-# Human Language and Character Encoding Support:
-#####################################
-
-ARG INSTALL_INTL=false
-RUN if [ ${INSTALL_INTL} = true ]; then \
-    # Install intl and requirements
-    apt-get update -yqq && \
-    apt-get install -y zlib1g-dev libicu-dev g++ && \
-    docker-php-ext-configure intl && \
-    docker-php-ext-install intl \
-;fi
-
-#####################################
-# GHOSTSCRIPT:
-#####################################
-
-ARG INSTALL_GHOSTSCRIPT=false
-RUN if [ ${INSTALL_GHOSTSCRIPT} = true ]; then \
-    # Install the ghostscript extension
-    # for PDF editing
-    apt-get update -yqq \
-    && apt-get install -y \
-    poppler-utils \
-    ghostscript \
-;fi
-
-#####################################
-# LDAP:
-#####################################
-
-ARG INSTALL_LDAP=false
-RUN if [ ${INSTALL_LDAP} = true ]; then \
-    apt-get update -yqq && \
-    apt-get install -y libldap2-dev && \
-    docker-php-ext-configure ldap --with-libdir=lib/x86_64-linux-gnu/ && \
-    docker-php-ext-install ldap \
-;fi
-
-#####################################
-# SQL SERVER:
-#####################################
-
-ARG INSTALL_MSSQL=false
-ENV INSTALL_MSSQL ${INSTALL_MSSQL}
-RUN if [ ${INSTALL_MSSQL} = true ]; then \
-    #####################################
-    # Ref from https://github.com/Microsoft/msphpsql/wiki/Dockerfile-for-adding-pdo_sqlsrv-and-sqlsrv-to-official-php-image
-    #####################################
-    # Add Microsoft repo for Microsoft ODBC Driver 13 for Linux
-    apt-get update -yqq \
-        && apt-get install -y apt-transport-https \
-        && curl https://packages.microsoft.com/keys/microsoft.asc | apt-key add - \
-        && curl https://packages.microsoft.com/config/debian/8/prod.list > /etc/apt/sources.list.d/mssql-release.list \
-        && apt-get update -yqq \
-
-    # Install Dependencies
-        && ACCEPT_EULA=Y apt-get install -y unixodbc unixodbc-dev libgss3 odbcinst msodbcsql locales \
-        && echo "en_US.UTF-8 UTF-8" > /etc/locale.gen \
-        && locale-gen \
-
-    # Install pdo_sqlsrv and sqlsrv from PECL. Replace pdo_sqlsrv-4.1.8preview with preferred version.
-        && pecl install pdo_sqlsrv-4.1.8preview sqlsrv-4.1.8preview \
-        && docker-php-ext-enable pdo_sqlsrv sqlsrv \
-;fi
-
-#
-#--------------------------------------------------------------------------
-# Final Touch
-#--------------------------------------------------------------------------
-#
-
-ADD ./laravel.ini /usr/local/etc/php/conf.d/
-ADD ./laravel.pool.conf /usr/local/etc/php-fpm.d/
-
-#RUN rm -r /var/lib/apt/lists/*
-
-RUN usermod -u 1000 www-data
-
-WORKDIR /var/www
-
-CMD ["php-fpm"]
-
-EXPOSE 9000

php-fpm/Dockerfile-71

@@ -1,309 +0,0 @@
-#
-#--------------------------------------------------------------------------
-# Image Setup
-#--------------------------------------------------------------------------
-#
-# To edit the 'php-fpm' base Image, visit its repository on Github
-#    https://github.com/Laradock/php-fpm
-#
-# To change its version, see the available Tags on the Docker Hub:
-#    https://hub.docker.com/r/laradock/php-fpm/tags/
-#
-# Note: Base Image name format {image-tag}-{php-version}
-#
-
-FROM laradock/php-fpm:1.4-71
-
-MAINTAINER Mahmoud Zalt <mahmoud@zalt.me>
-
-#
-#--------------------------------------------------------------------------
-# Mandatory Software's Installation
-#--------------------------------------------------------------------------
-#
-# Mandatory Software's such as ("mcrypt", "pdo_mysql", "libssl-dev", ....)
-# are installed on the base image 'laradock/php-fpm' image. If you want
-# to add more Software's or remove existing one, you need to edit the
-# base image (https://github.com/Laradock/php-fpm).
-#
-
-#
-#--------------------------------------------------------------------------
-# Optional Software's Installation
-#--------------------------------------------------------------------------
-#
-# Optional Software's will only be installed if you set them to `true`
-# in the `docker-compose.yml` before the build.
-# Example:
-#   - INSTALL_ZIP_ARCHIVE=true
-#
-
-#####################################
-# SOAP:
-#####################################
-
-ARG INSTALL_SOAP=false
-RUN if [ ${INSTALL_SOAP} = true ]; then \
-    # Install the soap extension
-    apt-get update -yqq && \
-    apt-get -y install libxml2-dev php-soap && \
-    docker-php-ext-install soap \
-;fi
-
-#####################################
-# xDebug:
-#####################################
-
-ARG INSTALL_XDEBUG=false
-RUN if [ ${INSTALL_XDEBUG} = true ]; then \
-    # Install the xdebug extension
-    pecl install xdebug && \
-    docker-php-ext-enable xdebug \
-;fi
-
-# Copy xdebug configration for remote debugging
-COPY ./xdebug.ini /usr/local/etc/php/conf.d/xdebug.ini
-
-#####################################
-# Blackfire:
-#####################################
-
-ARG INSTALL_BLACKFIRE=false
-RUN if [ ${INSTALL_XDEBUG} = false -a ${INSTALL_BLACKFIRE} = true ]; then \
-    version=$(php -r "echo PHP_MAJOR_VERSION.PHP_MINOR_VERSION;") \
-    && curl -A "Docker" -o /tmp/blackfire-probe.tar.gz -D - -L -s https://blackfire.io/api/v1/releases/probe/php/linux/amd64/$version \
-    && tar zxpf /tmp/blackfire-probe.tar.gz -C /tmp \
-    && mv /tmp/blackfire-*.so $(php -r "echo ini_get('extension_dir');")/blackfire.so \
-    && printf "extension=blackfire.so\nblackfire.agent_socket=tcp://blackfire:8707\n" > $PHP_INI_DIR/conf.d/blackfire.ini \
-;fi
-
-#####################################
-# PHP REDIS EXTENSION FOR PHP 7
-#####################################
-
-ARG INSTALL_PHPREDIS=false
-RUN if [ ${INSTALL_PHPREDIS} = true ]; then \
-    # Install Php Redis Extension
-    pecl install -o -f redis \
-    &&  rm -rf /tmp/pear \
-    &&  docker-php-ext-enable redis \
-;fi
-
-#####################################
-# Swoole EXTENSION FOR PHP 7
-#####################################
-
-ARG INSTALL_SWOOLE=false
-RUN if [ ${INSTALL_SWOOLE} = true ]; then \
-    # Install Php Swoole Extension
-    pecl install swoole \
-    &&  docker-php-ext-enable swoole \
-;fi
-
-#####################################
-# MongoDB:
-#####################################
-
-ARG INSTALL_MONGO=false
-RUN if [ ${INSTALL_MONGO} = true ]; then \
-    # Install the mongodb extension
-    pecl install mongodb && \
-    docker-php-ext-enable mongodb \
-;fi
-
-#####################################
-# ZipArchive:
-#####################################
-
-ARG INSTALL_ZIP_ARCHIVE=false
-RUN if [ ${INSTALL_ZIP_ARCHIVE} = true ]; then \
-    # Install the zip extension
-    docker-php-ext-install zip \
-;fi
-
-#####################################
-# bcmath:
-#####################################
-
-ARG INSTALL_BCMATH=false
-RUN if [ ${INSTALL_BCMATH} = true ]; then \
-    # Install the bcmath extension
-    docker-php-ext-install bcmath \
-;fi
-
-#####################################
-# PHP Memcached:
-#####################################
-
-ARG INSTALL_MEMCACHED=false
-RUN if [ ${INSTALL_MEMCACHED} = true ]; then \
-    # Install the php memcached extension
-    curl -L -o /tmp/memcached.tar.gz "https://github.com/php-memcached-dev/php-memcached/archive/php7.tar.gz" \
-    && mkdir -p memcached \
-    && tar -C memcached -zxvf /tmp/memcached.tar.gz --strip 1 \
-    && ( \
-        cd memcached \
-        && phpize \
-        && ./configure \
-        && make -j$(nproc) \
-        && make install \
-    ) \
-    && rm -r memcached \
-    && rm /tmp/memcached.tar.gz \
-    && docker-php-ext-enable memcached \
-;fi
-
-#####################################
-# Exif:
-#####################################
-
-ARG INSTALL_EXIF=false
-RUN if [ ${INSTALL_EXIF} = true ]; then \
-    # Enable Exif PHP extentions requirements
-    docker-php-ext-install exif \
-;fi
-
-#####################################
-# PHP Aerospike:
-#####################################
-
-ARG INSTALL_AEROSPIKE=false
-ENV INSTALL_AEROSPIKE ${INSTALL_AEROSPIKE}
-
-# Copy aerospike configration for remote debugging
-COPY ./aerospike.ini /usr/local/etc/php/conf.d/aerospike.ini
-
-RUN if [ ${INSTALL_AEROSPIKE} = true ]; then \
-    # Fix dependencies for PHPUnit within aerospike extension
-    apt-get update -yqq && \
-    apt-get -y install sudo wget && \
-
-    # Install the php aerospike extension
-    curl -L -o /tmp/aerospike-client-php.tar.gz "https://github.com/aerospike/aerospike-client-php/archive/3.4.14.tar.gz" \
-    && mkdir -p aerospike-client-php \
-    && tar -C aerospike-client-php -zxvf /tmp/aerospike-client-php.tar.gz --strip 1 \
-    && ( \
-        cd aerospike-client-php/src/aerospike \
-        && phpize \
-        && ./build.sh \
-        && make install \
-    ) \
-    && rm /tmp/aerospike-client-php.tar.gz \
-;fi
-
-RUN if [ ${INSTALL_AEROSPIKE} = false ]; then \
-    rm /usr/local/etc/php/conf.d/aerospike.ini \
-;fi
-
-#####################################
-# Opcache:
-#####################################
-
-ARG INSTALL_OPCACHE=false
-RUN if [ ${INSTALL_OPCACHE} = true ]; then \
-    docker-php-ext-install opcache \
-;fi
-
-# Copy opcache configration
-COPY ./opcache.ini /usr/local/etc/php/conf.d/opcache.ini
-
-#####################################
-# Mysqli Modifications:
-#####################################
-
-ARG INSTALL_MYSQLI=false
-RUN if [ ${INSTALL_MYSQLI} = true ]; then \
-    docker-php-ext-install mysqli \
-;fi
-
-#####################################
-# Tokenizer Modifications:
-#####################################
-
-ARG INSTALL_TOKENIZER=false
-RUN if [ ${INSTALL_TOKENIZER} = true ]; then \
-    docker-php-ext-install tokenizer \
-;fi
-
-#####################################
-# Human Language and Character Encoding Support:
-#####################################
-
-ARG INSTALL_INTL=false
-RUN if [ ${INSTALL_INTL} = true ]; then \
-    # Install intl and requirements
-    apt-get update -yqq && \
-    apt-get install -y zlib1g-dev libicu-dev g++ && \
-    docker-php-ext-configure intl && \
-    docker-php-ext-install intl \
-;fi
-
-#####################################
-# GHOSTSCRIPT:
-#####################################
-
-ARG INSTALL_GHOSTSCRIPT=false
-RUN if [ ${INSTALL_GHOSTSCRIPT} = true ]; then \
-    # Install the ghostscript extension
-    # for PDF editing
-    apt-get update -yqq \
-    && apt-get install -y \
-    poppler-utils \
-    ghostscript \
-;fi
-
-#####################################
-# LDAP:
-#####################################
-
-ARG INSTALL_LDAP=false
-RUN if [ ${INSTALL_LDAP} = true ]; then \
-    apt-get update -yqq && \
-    apt-get install -y libldap2-dev && \
-    docker-php-ext-configure ldap --with-libdir=lib/x86_64-linux-gnu/ && \
-    docker-php-ext-install ldap \
-;fi
-
-#####################################
-# SQL SERVER:
-#####################################
-
-ARG INSTALL_MSSQL=false
-ENV INSTALL_MSSQL ${INSTALL_MSSQL}
-RUN if [ ${INSTALL_MSSQL} = true ]; then \
-    #####################################
-    # Ref from https://github.com/Microsoft/msphpsql/wiki/Dockerfile-for-adding-pdo_sqlsrv-and-sqlsrv-to-official-php-image
-    #####################################
-    # Add Microsoft repo for Microsoft ODBC Driver 13 for Linux
-    apt-get update -yqq && apt-get install -y apt-transport-https \
-        && curl https://packages.microsoft.com/keys/microsoft.asc | apt-key add - \
-        && curl https://packages.microsoft.com/config/debian/8/prod.list > /etc/apt/sources.list.d/mssql-release.list \
-        && apt-get update -yqq \
-
-    # Install Dependencies
-        && ACCEPT_EULA=Y apt-get install -y unixodbc unixodbc-dev libgss3 odbcinst msodbcsql locales \
-        && echo "en_US.UTF-8 UTF-8" > /etc/locale.gen && locale-gen \
-
-    # Install pdo_sqlsrv and sqlsrv from PECL. Replace pdo_sqlsrv-4.1.8preview with preferred version.
-        && pecl install pdo_sqlsrv-4.1.8preview sqlsrv-4.1.8preview \
-        && docker-php-ext-enable pdo_sqlsrv sqlsrv \
-;fi
-
-#
-#--------------------------------------------------------------------------
-# Final Touch
-#--------------------------------------------------------------------------
-#
-
-ADD ./laravel.ini /usr/local/etc/php/conf.d
-ADD ./laravel.pool.conf /usr/local/etc/php-fpm.d/
-
-#RUN rm -r /var/lib/apt/lists/*
-
-RUN usermod -u 1000 www-data
-
-WORKDIR /var/www
-
-CMD ["php-fpm"]
-
-EXPOSE 9000

php-fpm/aerospike.ini

@@ -1,2 +1,3 @@
+extension=aerospike.so
 aerospike.udf.lua_system_path=/usr/local/aerospike/lua
 aerospike.udf.lua_user_path=/usr/local/aerospike/usr-lua

php-fpm/laravel.ini

@@ -4,10 +4,13 @@ log_errors=On
 
 ; Maximum amount of memory a script may consume (128MB)
 ; http://php.net/memory-limit
-memory_limit = 128M
+memory_limit = 256M
 ; Maximum allowed size for uploaded files.
 ; http://php.net/upload-max-filesize
 upload_max_filesize = 20M
 ; Sets max size of post data allowed.
 ; http://php.net/post-max-size
 post_max_size = 20M
+max_execution_time=600
+default_socket_timeout=3600
+request_terminate_timeout=600

php-fpm/php5.6.ini

@@ -1442,7 +1442,7 @@ session.save_handler = files
 ; where MODE is the octal representation of the mode. Note that this
 ; does not overwrite the process's umask.
 ; http://php.net/session.save-path
-;session.save_path = "/tmp"
+session.save_path = "/tmp"
 
 ; Whether to use strict session mode.
 ; Strict session mode does not accept uninitialized session ID and regenerate

php-fpm/php7.0.ini

@@ -380,7 +380,7 @@ expose_php = On
 ; Maximum execution time of each script, in seconds
 ; http://php.net/max-execution-time
 ; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
+max_execution_time = 600
 
 ; Maximum amount of time each script may spend parsing request data. It's a good
 ; idea to limit this time on productions servers in order to eliminate unexpectedly
@@ -390,7 +390,7 @@ max_execution_time = 30
 ; Development Value: 60 (60 seconds)
 ; Production Value: 60 (60 seconds)
 ; http://php.net/max-input-time
-max_input_time = 60
+max_input_time = 120
 
 ; Maximum input variable nesting level
 ; http://php.net/max-input-nesting-level
@@ -401,7 +401,7 @@ max_input_time = 60
 
 ; Maximum amount of memory a script may consume (128MB)
 ; http://php.net/memory-limit
-memory_limit = 128M
+memory_limit = 256M
 
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ; Error handling and logging ;
@@ -1348,7 +1348,7 @@ session.save_handler = files
 ; where MODE is the octal representation of the mode. Note that this
 ; does not overwrite the process's umask.
 ; http://php.net/session.save-path
-;session.save_path = "/tmp"
+session.save_path = "/tmp"
 
 ; Whether to use strict session mode.
 ; Strict session mode does not accept uninitialized session ID and regenerate

php-fpm/php7.1.ini

@@ -380,7 +380,7 @@ expose_php = On
 ; Maximum execution time of each script, in seconds
 ; http://php.net/max-execution-time
 ; Note: This directive is hardcoded to 0 for the CLI SAPI
-max_execution_time = 30
+max_execution_time = 600
 
 ; Maximum amount of time each script may spend parsing request data. It's a good
 ; idea to limit this time on productions servers in order to eliminate unexpectedly
@@ -390,7 +390,7 @@ max_execution_time = 30
 ; Development Value: 60 (60 seconds)
 ; Production Value: 60 (60 seconds)
 ; http://php.net/max-input-time
-max_input_time = 60
+max_input_time = 120
 
 ; Maximum input variable nesting level
 ; http://php.net/max-input-nesting-level
@@ -401,7 +401,7 @@ max_input_time = 60
 
 ; Maximum amount of memory a script may consume (128MB)
 ; http://php.net/memory-limit
-memory_limit = 128M
+memory_limit = 256M
 
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ; Error handling and logging ;
@@ -1348,7 +1348,7 @@ session.save_handler = files
 ; where MODE is the octal representation of the mode. Note that this
 ; does not overwrite the process's umask.
 ; http://php.net/session.save-path
-;session.save_path = "/tmp"
+session.save_path = "/tmp"
 
 ; Whether to use strict session mode.
 ; Strict session mode does not accept uninitialized session ID and regenerate